PDA

View Full Version : 2010 PRO-AM RX-7 FC3S TURBO V6 Build


spindoctor_fc38
02-15-2010, 02:32 PM
Hey was up everybody my name is eddie from sv-performance going to pick up thunderdrift in wilow, ca and at u can see me also at just drift this year.............

Justin Banner
02-15-2010, 05:00 PM
Ok, I can't tell what kind of V6 that is.

INFO
02-15-2010, 05:05 PM
ok, i can't tell what kind of v6 that is.

3.8l v6 turbo camaro



Eddie,
good luck with your build!

spindoctor_fc38
02-15-2010, 05:11 PM
its is a 3.8l out of a 99 camaro with a Cummins turbo on 8psi

spindoctor_fc38
02-15-2010, 05:13 PM
thanks bro and u got first ride along in the fc3s

Justin Banner
02-15-2010, 05:36 PM
its is a 3.8l out of a 99 camaro with a Cummins turbo on 8psi

Ah, now that will be a good engine to see. You coming out to W.VA. or NJ? You might see my '90 240SX KA24E boosted by a M90 supercharger from a Pontiac GTP.

b_hydra
02-15-2010, 06:24 PM
Thumbs up for a unique swap!

What was it that made you go with that particular motor? Did you end up using the T56 transmission like the LSX swaps do or will that not mate well to the GM V6?

spindoctor_fc38
02-16-2010, 09:36 AM
Im going to tour the state's with the car but this year im focused on the pro am in seattle... and cali .....the reson i went with the 3.8l v6 swap is unic never done before plus the amount of torque it's pushing at 8psi is amazing the tranny i used was a m49 borg warner very short gear ratio

spindoctor_fc38
02-18-2010, 10:34 AM
here are some updates

spindoctor_fc38
02-25-2010, 10:03 AM
just got done with the k-sport slide control coilovers gettin ready for the car wrap stay tune