PDA

View Full Version : post your current setup


driftallcorners
08-03-2003, 04:27 AM
i just wanna see what everybody here is running: mods, suspension, etc.

i'll start...
'88 n/a FC
cone filter
no mufflers (took them off to replace gaskets, i haven't gotten around to replacing them.
16" BBS 2-piece rims
shot rear struts (super body-roll and bouncy a$$ rear end)

i need a better job, i can't afford any suspension mods. i am saving up for some Tein HE's right now.:D

MrMigs
08-03-2003, 01:49 PM
1997 240sx

removed
- A/C Condenser
- A/C Tubes & Compressor
- Stock Sideskirts
- Stock rear lights // Traded with 95/96 Rear Lights
- Stock intake resonator

added
- Custom exhaust
- Pilot Short shifter
- Super Small Steering Wheel
- Oil Cooler (needs repair)
- Misc. Cone Filter
- Viscous Limited Slip Differential (From 1994 Infinity J30)
- With pre-1995 J30 Axles

Suspension
- Whiteline Adjustable Swaybars
- Tanabe Sustec Pro S-S Coilovers
- Replaced 4kg rear springs with 8kg
- Current Springrate: 6kg in front // 8kg in rear
- Custom Made Subframe Spacers

Rollers
- Oldschool Ray's Engineering Wheels
- front: 17 x 7 +15 offset
- rear: 17 x 8 +20 offset
- Visa VK40G Tires (215/45/17) all around

driftallcorners
08-03-2003, 02:14 PM
right on... nice set up.

c'mon guys 13 views and 1 reply... what's going on here?

boro240
08-03-2003, 06:21 PM
Originally posted by MrMigs
- Current Springrate: 6kg in front // 8kg in rear

what? why do you have a HARDER spring rate in the rear?

JonnySlick
08-03-2003, 06:47 PM
miata mx-5/roadster

****just picked it up couple of weeks ago so not a lot of work done to it yet*****

*1992 all stock roadster
*factory rims painted satin blk, removed center caps.
*SPAX 28 way adj. coilovers (coming next week yeah!)
*Flowfit seats waiting to be installed.

plans w/in next month:

*hard dog roll bar
*racing beat cat-back sport exhaust
*miatamania test pipe
*k&n cone filter
*tune up
*mazdaspeed clutch kit
*alignment and new front tires

RoadblockTDX
08-05-2003, 01:27 AM
91 240SX hatch
17" Enkei's (came with car)
Shot suspension
An angry broke driver..

DoriftuEvo
08-05-2003, 01:48 AM
I was going to start with suspension on my bimmer, but that blew up and my FF sentra isn't worth doing anything to.

MrMigs
08-05-2003, 12:03 PM
Originally posted by boro240
what? why do you have a HARDER spring rate in the rear?

Insane oversteer is fun

JonnySlick
08-05-2003, 01:31 PM
Originally posted by MrMigs
Insane oversteer is fun


ha ha!

marshun
08-05-2003, 04:06 PM
just weight reduction on the corolla. no seats. panels sound deadening tar. cut out the skeleton off of the hood and doors. no carpet. cut the springs one coil to lower the car just a tad. i dont have enough money to get suspension mods. and im sellin the ae86 anyway.

Takumi X
08-05-2003, 04:29 PM
AE86 is already light enough to obe a good drifter, why the weight reductions ? Just destroying a "good" interior in my opinion.

frestylefc3s
08-05-2003, 04:59 PM
1990 fc3s turbo II

APEXi Intake
APEXi Turbo Timer
Koyo Aluminum Radiator
Fiero Electric-Fan
Greddy Boost Gauge
Greddy Water Temp. Gauge
Rotora Slotted Rotors
Porterfield RS4 Brake Pads
Cork Sport SS Braided Brake Lines
Racing Beat Adjustable Endlinks
Racing Beat FCD
Thunder Fabrication 3" Downpipe/Midpipe - 2.5" Exhaust
Gunmetal Watanabe RS8 - 16x7 front and 16x8 rear w/ Yokohama DNA GP's 225.50.16 and 245.50.16
Removed ABS System, AC System, Emissions System, Clutch Fan

frestylefc3s
08-05-2003, 04:59 PM
Originally posted by driftallcorners
i am saving up for some Tein HE's right now.:D


haha me tooooo - or knightsports coilovers

TEINAGER
08-05-2003, 05:38 PM
New to the boards. Wassup to all!
Current set up includes Tein flex coilovers w/edfc (to be installed tomorrow) My apex n1's just blew out after 3yrs and 60k.
ST anti sway bars
Stillen front TC rods
Cusco rear arms
Nismo tower braces (front&rear)
Kaaz 2-way lsd
Nismo Power Brace (paid for,just waiting)
That's it for suspension mods on my s14.

driftallcorners
08-05-2003, 06:11 PM
frestylefc3s... i like your mr. amemiya avatar. are you on any rotary message boards?

frestylefc3s
08-05-2003, 10:54 PM
nopistons.com ... teamfc3s.org .... and sadly rx7club.com


im mostly on np.com though - great guys - on there and rx7club im frestylereaction - and frestylereactio on teamfc

wat bout u ......

marshun
08-05-2003, 11:21 PM
Originally posted by Takumi X
AE86 is already light enough to obe a good drifter, why the weight reductions ? Just destroying a "good" interior in my opinion.

of course you'd assume that the interior was good when i got it. but this car was recued from a tow yard. it was a bout to be thrown into the salvage area. this car had an engine in it. the engine was in pieces and all over the interior. ALL OVER. oil everywhere. and i guess you dont know too much about the ae86. its pretty underpowered so the weight reduction helps with making the car more predictable. and every car can use some weight reduction off of the stock weight trim

driftallcorners
08-08-2003, 02:09 AM
Originally posted by frestylefc3s
nopistons.com ... teamfc3s.org .... and sadly rx7club.com


im mostly on np.com though - great guys - on there and rx7club im frestylereaction - and frestylereactio on teamfc

wat bout u ......

same name on teamfc.org. i don't like rx7club... i have heard way too much crap about that site to bother registering. i have never been on np.com... maybe i will check it out.

jsigone
08-09-2003, 07:31 PM
90 Eclipse GST
Ported 20G
ported 2g mani with Tial 35HP welded to #1 runner
2.5" turbo back
high flow cat
Open K&N with custom 3" CAI
2G MAS
Nippon Denso 720cc injectors
Walbro 255lph fuel pump
APEXi AFC
GM 3bar MAP
MKIV Supra SMIC
2 1/2 IC piping
Greddy Type S BOV
Stock head
Stock block

ACT extreme Clutch with unsprung 6 puck
RRE lightened flywheel
FD3S 16x8 rims
Goodyear rubber
AGXs all around
Sprint 2" drop Springs
Suspension Technique Adjustable Rear Sway bar
Ractive Front Strut Tower Bar

NismoPwr
08-09-2003, 09:16 PM
Originally posted by frestylefc3s
1990 fc3s turbo II

APEXi Intake
APEXi Turbo Timer
Koyo Aluminum Radiator
Fiero Electric-Fan
Greddy Boost Gauge
Greddy Water Temp. Gauge
Rotora Slotted Rotors
Porterfield RS4 Brake Pads
Cork Sport SS Braided Brake Lines
Racing Beat Adjustable Endlinks
Racing Beat FCD
Thunder Fabrication 3" Downpipe/Midpipe - 2.5" Exhaust
Gunmetal Watanabe RS8 - 16x7 front and 16x8 rear w/ Yokohama DNA GP's 225.50.16 and 245.50.16
Removed ABS System, AC System, Emissions System, Clutch Fan

your car looks great, I love the watanabes on it.

Gyakusetsu
08-09-2003, 09:26 PM
1990 miata

-hard dog m2 sport single diagnal roll bar
-h&r race springs f/280 and r/250
-kyb 8-way adj. shocks



I also have a FMII kit(turbo kit) on layaway.
Can't wait til I finish paying it off!!

frestylefc3s
08-10-2003, 01:13 PM
Originally posted by NismoPwr
your car looks great, I love the watanabes on it.


thanks buddy :)