turbo kit for ka24e

dori2 s13coupe · 01-07-2006, 04:53 PM

t3 turbo super 60 300
custom logstyle manifold 250
custom downpipe to a hallowed cat to a trust greddy sp exhaust with an outlet 4.5in 275
z32 maf 125
custom hot pipe with a blitz bov to sr smic to stock cold pipe.. 275
fc 460 injectors with resistor pack 75
safc 150
autometer boost and oil pressure gauge with custom gauge pod 100
2 electric fans 50
aluminum pulley 75
gripforce 6 puck clutch 160
and all oil lines. ss and AN

ill let it all go for 1650...

this is straight up bolt on... the stuff is still on the car..the car is fast i promise.. see for ur self... if u want to buy the kit i will let u drive the car before selling it.. i am located in cerritos.. no lowballers

aim anonymousadrian
email anonymousadrian@yahoo.com
# 562 569 0981

BanZI29 · 01-08-2006, 09:26 PM

hey. do you think that the kit will fit a 01 altima with a KA24DE?

sdtouge · 01-08-2006, 11:37 PM

it wont fit.
manifold wont work
exhuast dp wont work
intercooler piping wont work

it can work, but you would need to hack appart and redo EVERYTHING entirly not worth it for you.

BanZI29 · 01-09-2006, 10:23 PM

DAMN!DAMN!DAMN!!!

does anyone know where I can get a turbo for a KA in an altima 01??

Mike Peters · 01-10-2006, 01:01 AM

ugh, isnt this drifting.com ?

when did it become www.ihaveagayaltimaimgiongtowastemoneyturbochargin gsoitcanrun15.3's@120mphandboilfront225tiresihadto pullthefenderstofit.com

na70sh · 01-10-2006, 01:30 AM

ok i drive a 240sx with a ka24e, im interested but only if consider 1300 dollars, so yea post if u agree, or let me know how u stand on this offer

p.s. mike, to each his own, if they wanna waste their money on crappy altimas let them, let them post if they want, its no big deal it doesnt hurt you, let it go dude, you're a good drifter and all but it doesn't give you the right to shoot down a guys question, especially if its really is none of your concern

good luck with the whole getting sponsors thing

Mike Peters · 01-10-2006, 02:08 AM

I was just giving him a hard time because this is a drifting forum, and hes tryign to put a kit off a 240 with a single cam on his twin cam transverse mounted engine car that cant fit wider than 225's up front without pulling/killing hte fenders, which is kinda funny.

sdtouge · 01-10-2006, 01:39 PM

who cares dude
he likes altimas
you like el caminos

get over it.

JonnySlick · 01-11-2006, 10:36 PM

Quote:

Originally Posted by Mike Peters

ugh, isnt this drifting.com ?

when did it become www.ihaveagayaltimaimgiongtowastemoneyturbochargin gsoitcanrun15.3's@120mphandboilfront225tiresihadto pullthefenderstofit.com

+1

dori2 s13coupe · 01-12-2006, 09:19 PM

na70sh.. for that price.. i might have to keep some parts.. but if i get desperate enough maybe ill let it go for that cheap... let me think it over..

DRIFTING_CLOUD · 01-17-2006, 09:41 PM

Still For Sale?

dori2 s13coupe · 01-18-2006, 09:53 AM

yup.........

dori2 s13coupe · 01-20-2006, 11:20 PM

is it too expensive?

dori2 s13coupe · 01-21-2006, 09:12 PM

these r sorta old pics..

01-07-2006, 04:53 PM	#1
dori2 s13coupe Registered User Join Date: May 2004 Posts: 131	turbo kit for ka24e t3 turbo super 60 300 custom logstyle manifold 250 custom downpipe to a hallowed cat to a trust greddy sp exhaust with an outlet 4.5in 275 z32 maf 125 custom hot pipe with a blitz bov to sr smic to stock cold pipe.. 275 fc 460 injectors with resistor pack 75 safc 150 autometer boost and oil pressure gauge with custom gauge pod 100 2 electric fans 50 aluminum pulley 75 gripforce 6 puck clutch 160 and all oil lines. ss and AN ill let it all go for 1650... this is straight up bolt on... the stuff is still on the car..the car is fast i promise.. see for ur self... if u want to buy the kit i will let u drive the car before selling it.. i am located in cerritos.. no lowballers aim anonymousadrian email anonymousadrian@yahoo.com # 562 569 0981 Last edited by dori2 s13coupe; 01-07-2006 at 07:37 PM.

01-08-2006, 09:26 PM	#2
BanZI29 Registered User Join Date: Mar 2004 Location: San Diego Posts: 18	turbo FF?? hey. do you think that the kit will fit a 01 altima with a KA24DE?

01-09-2006, 10:23 PM	#4
BanZI29 Registered User Join Date: Mar 2004 Location: San Diego Posts: 18	Damn!!!!! DAMN!DAMN!DAMN!!! does anyone know where I can get a turbo for a KA in an altima 01??

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

01-08-2006, 11:37 PM	#3
sdtouge Registered User Join Date: Jul 2004 Location: san diego Posts: 868	it wont fit. manifold wont work exhuast dp wont work intercooler piping wont work it can work, but you would need to hack appart and redo EVERYTHING entirly not worth it for you.

01-10-2006, 01:01 AM	#5
Mike Peters Registered User Join Date: Apr 2005 Location: Huntsville, TX Posts: 1,012	ugh, isnt this drifting.com ? when did it become www.ihaveagayaltimaimgiongtowastemoneyturbochargin gsoitcanrun15.3's@120mphandboilfront225tiresihadto pullthefenderstofit.com

01-10-2006, 01:30 AM	#6
na70sh Registered User Join Date: May 2004 Location: ca Posts: 155	ok i drive a 240sx with a ka24e, im interested but only if consider 1300 dollars, so yea post if u agree, or let me know how u stand on this offer p.s. mike, to each his own, if they wanna waste their money on crappy altimas let them, let them post if they want, its no big deal it doesnt hurt you, let it go dude, you're a good drifter and all but it doesn't give you the right to shoot down a guys question, especially if its really is none of your concern good luck with the whole getting sponsors thing

01-10-2006, 02:08 AM	#7
Mike Peters Registered User Join Date: Apr 2005 Location: Huntsville, TX Posts: 1,012	I was just giving him a hard time because this is a drifting forum, and hes tryign to put a kit off a 240 with a single cam on his twin cam transverse mounted engine car that cant fit wider than 225's up front without pulling/killing hte fenders, which is kinda funny.

01-10-2006, 01:39 PM	#8
sdtouge Registered User Join Date: Jul 2004 Location: san diego Posts: 868	who cares dude he likes altimas you like el caminos get over it.

01-12-2006, 09:19 PM	#10
dori2 s13coupe Registered User Join Date: May 2004 Posts: 131	na70sh.. for that price.. i might have to keep some parts.. but if i get desperate enough maybe ill let it go for that cheap... let me think it over..

01-17-2006, 09:41 PM	#11
DRIFTING_CLOUD User Join Date: Jan 2006 Posts: 1	Still For Sale?

01-18-2006, 09:53 AM	#12
dori2 s13coupe Registered User Join Date: May 2004 Posts: 131	yup.........

01-20-2006, 11:20 PM	#13
dori2 s13coupe Registered User Join Date: May 2004 Posts: 131	is it too expensive?

01-21-2006, 09:12 PM	#14
dori2 s13coupe Registered User Join Date: May 2004 Posts: 131	these r sorta old pics..