S13 Gold Dsport Cover Car Part Out

11-14-2006, 09:28 PM

Everything is for sale. If theres something you want but not on the list but is on a 1990 240sx. Ask I might still have it.

more pics can be found on JTuned.com
http://www.jtuned.com/content/templa...d=283&zoneid=1

sr20det short block with oil pump and water pump 300
Sr20det port/polished head, Greddy valve springs. 1000
Tomei sr20 pon cams. Type-r 256/256 11.5 lift 500
HKS top feed fuel rail (scratch/dimple on rail from strut bar), 660cc Blitz injectors, sx fuel pressure regulator, fuel pressure gauge, stainless lines. 600
Greddy lightweight pulleys 100
Greddy intake manifold, sr20 throttle body 350
Megan exhaust manifold drilled for egt 75
Greddy rocker arm stoppers 50
Greddy Oil catch can 50
HKS GT-RS Turbo, include adapters for s13 1200
Megan Racing stainless down pipe (extra o2 sensor bung and o2 block off) 75
ARC intercooler, slight crack on endtank but fixed, direct bolt up for Greddy manifold. 900
ARC Spark plug cover titanium 150
Split Fire Coil packs 375
SR20 Ignitor chip 130
HKS Blow-off Valve HKS hotpipe kit 175
Koyo Aluminum Radiator 260
ARC Radiator Cap 15
Nismo Thermostat 35
Setrab Oil cooler, Stainless lines, Oil Filter relocation, Block adapter 350
FAL shrouded dual electric fan ultra low profile 220
AEM EMS for sr20 with speed density kit (MAP, IAT Sensor) 1500
Megan Racing Test Pipe 50
ARC Titainum radiator cooling panel 125
ARC Radiator Hose (red) 150
Nismo Engine Mounts 130
Greddy Oil Pan 250
HKS Single plate Clutch kit with HKS Flywheel 400
Nismo clutch slave cylinder 120
Stainless clutch line 50
Nismo 2 Way LSD in pumpkin 500
S13 rear axle pair 150
HKS Hypermax II Coilovers missing one knob but easily turned with pliers or fingers 1100
Togue Factory Rear camber arms 110
Togue Factory front tension rods 90
GTO 5 lug conversion front, rear z32 hub 350
Tein Tie rod , Tein tie rod ends 175
Nismo Power brace painted gold 125
Suspension Technique sway bars front, rear 150
Rotora 4pot big brake kit red fits s13 w/ 5 lug, s14. 1200
Rotora slotted 5 lug rear rotor s13, s14 75
Rotor Dry Carbon GT Wing very light around 5 lbs 550
Kyoei 15mm spacer bolt on spacer with studs 50
Kyoei 25mm spacer bolt on spacer with studs 50
M1 Carbon Roof wing 100
MSport Body Kit front, sides, rear, includes position lights 500
MSport Widebody 30mm front fender 200
HKS Hi Power Exhaust 375
JDM Folding mirrors modified for US mirrors with center switch 125
RPS 13 Taillights with RPS13 center garnish 500
Do-Luck Tension gauge Roll Bar 450
Advance Strut Bars brought back from japan front, rear 100
Bride Zeta III Seat red , with head, lumbar, leg pads 500
Red suede glove box, center console panel w/ shift boot, door panels 250
ARC titanium shift knob short round 110
Nardi Deep corn steering wheel black with red stitch 210
Nismo Steering wheel hub 45
Blitz BLM 60mm Boost, EGT, Pressure, Temp Gauge with all sensors 550
Blitz SBC Id black boost controller 375
Blitz RFit Fuel controller NEW 350
Bride S13,S14, S15 Seat bracket 125
SR20DET 5 speed manual transmission 300
B&M Short Shifter 150
Laser cut 3 60mm gauge holder for center Vents 15
SR20DET cam angle sensor 150
Power Steering pump no pulley 50
Alternator no pulley 50
Gramlight 57s Pro Greenish Gunmetal 5lug 18x8.5 +5 18x10.5 +5 Yokohama es100 tires pretty worn in the rear perfect fit for widebody s13. 1100
Clarion MP3 Head Unit some cheap one. 50

All parts are for an s13 unless otherwise stated. Ask if you want to know if it works on your car. Prices are negotiable if you buy more then one item.

The car is still complete right now but I'm starting the dismantaling phase this weekend and I should befinished the weekend after thanksgiving. I can take off what ever people want first this weekend as I continue to tear it down. Local pick up is okay in Tustin or I can bring to work with me in Santa Fe Springs. Email me for a shipping quote.

mandle · 11-19-2006, 07:59 AM

hi there i am interested in the greddy pulley kit and the greddy oil catch can can you let me know how much shipping is to 34753 thanks

vietchink · 11-21-2006, 01:10 PM

Hey, how much did you want for the shell? I'm thinking of taking the shell, body kit, fenders, and lights and maybe the wing too. How much for all of it, and how much is it for just the shell? I live in Anaheim so I can come pick it up.

Bstone · 11-21-2006, 06:00 PM

I'll take the Laser cut 3 60mm gauge holder for center Vents for $15 plus shipping to 46250.

inuinc · 11-23-2006, 01:50 AM

Can you email me? I'm having problems with my account allowing me to send any out to forum members. There are a couple of items I may be interested in. Thanks

Lastexile · 11-26-2006, 05:37 PM

Sad to see a pretty car being taken apart but, at least ppl can benefit from it. :P Alrite, I'm interested in the:

*Do-Luck Tension gauge Roll Bar 450 - is this aluminum 1 or steel???
*Setrab Oil cooler, Stainless lines, Oil Filter relocation, Block adapter 350 -
when you say block adapter do you mean just a sandwich plate or does
it take the place of the oil filter housing, where oil filter woudl normally
bolt up???

email me at aeonflux268766@aol.com with just a lil bit more info and i would love to take them pieces of yer hands... -kyle

akumaet · 11-27-2006, 05:47 PM

how much for the complete engine minus the turbo setup?

gan-san · 12-14-2006, 01:03 PM

any chance of getting those hubs? i could really use

email me at ggiwin@hotmail.com

fepst3r · 12-28-2006, 02:05 AM

Bride Zeta III Seat red , with head, lumbar, leg pads 500

do u still have this and is it a pair?

throwedtexan · 01-28-2007, 09:07 PM

interested in the door panels if they're power, glove box ,etc. shipped to 84720

jspec240 · 02-07-2007, 10:54 AM

would you work a deal out with the bm shifter and the khs bov w hot pipe?

NEVERLIFT · 02-15-2007, 07:21 AM

crap man I'll take the front kouki lights for 30+shipping

also how much for the rucas? email me at sus2josh@comcast.net

fenderfatstrat · 02-15-2007, 10:53 PM

hello do you have a screen name we can talk on i have a few parts in intersted in my screen name is Fenderfatstrat6 on aim and yahoo

thanks!

Jeremy

Unknown_Slide · 02-24-2007, 09:45 PM

still have those rucas email rtimbol@sbcglobal.net

JDMSR20 · 02-27-2007, 08:43 AM

Hi, what do you still have? Let me know, I want your Nismo LSD, HKS BOV w/ hotpipe, Greddy IM, ARC radi cap, and Greddy Catch can. Let me know ASAP.

Thanks.

motoman6968 · 03-12-2007, 09:02 PM

I am interested in the clutch and flywheel, how much has it been used? can I use paypal?

dwada · 04-02-2007, 05:10 PM

Hi i'm interested in the downpipe, the injecters, and the clutch slave

Pm me back or email at dwadahi1@yahoo.com

Thanks

Rotary Magic · 04-07-2007, 11:07 PM

PM me or email me back at evenflow88@yahoo.com about the seat and harness and maybe steering wheel

thanks

iquiksilvri · 04-16-2007, 11:01 AM

Interested in the bride seat(s) if you still have them and also the cam angle sensor. Will pick up at either location..

iquiksilvri · 04-17-2007, 04:23 PM

Interested in cam angle sensor.. where are you located? shipped to 90840.. Thanks..

11-14-2006, 09:28 PM	#1
RicerX1 Guest Posts: n/a	S13 Gold Dsport Cover Car Part Out Everything is for sale. If theres something you want but not on the list but is on a 1990 240sx. Ask I might still have it. more pics can be found on JTuned.com http://www.jtuned.com/content/templa...d=283&zoneid=1 sr20det short block with oil pump and water pump 300 Sr20det port/polished head, Greddy valve springs. 1000 Tomei sr20 pon cams. Type-r 256/256 11.5 lift 500 HKS top feed fuel rail (scratch/dimple on rail from strut bar), 660cc Blitz injectors, sx fuel pressure regulator, fuel pressure gauge, stainless lines. 600 Greddy lightweight pulleys 100 Greddy intake manifold, sr20 throttle body 350 Megan exhaust manifold drilled for egt 75 Greddy rocker arm stoppers 50 Greddy Oil catch can 50 HKS GT-RS Turbo, include adapters for s13 1200 Megan Racing stainless down pipe (extra o2 sensor bung and o2 block off) 75 ARC intercooler, slight crack on endtank but fixed, direct bolt up for Greddy manifold. 900 ARC Spark plug cover titanium 150 Split Fire Coil packs 375 SR20 Ignitor chip 130 HKS Blow-off Valve HKS hotpipe kit 175 Koyo Aluminum Radiator 260 ARC Radiator Cap 15 Nismo Thermostat 35 Setrab Oil cooler, Stainless lines, Oil Filter relocation, Block adapter 350 FAL shrouded dual electric fan ultra low profile 220 AEM EMS for sr20 with speed density kit (MAP, IAT Sensor) 1500 Megan Racing Test Pipe 50 ARC Titainum radiator cooling panel 125 ARC Radiator Hose (red) 150 Nismo Engine Mounts 130 Greddy Oil Pan 250 HKS Single plate Clutch kit with HKS Flywheel 400 Nismo clutch slave cylinder 120 Stainless clutch line 50 Nismo 2 Way LSD in pumpkin 500 S13 rear axle pair 150 HKS Hypermax II Coilovers missing one knob but easily turned with pliers or fingers 1100 Togue Factory Rear camber arms 110 Togue Factory front tension rods 90 GTO 5 lug conversion front, rear z32 hub 350 Tein Tie rod , Tein tie rod ends 175 Nismo Power brace painted gold 125 Suspension Technique sway bars front, rear 150 Rotora 4pot big brake kit red fits s13 w/ 5 lug, s14. 1200 Rotora slotted 5 lug rear rotor s13, s14 75 Rotor Dry Carbon GT Wing very light around 5 lbs 550 Kyoei 15mm spacer bolt on spacer with studs 50 Kyoei 25mm spacer bolt on spacer with studs 50 M1 Carbon Roof wing 100 MSport Body Kit front, sides, rear, includes position lights 500 MSport Widebody 30mm front fender 200 HKS Hi Power Exhaust 375 JDM Folding mirrors modified for US mirrors with center switch 125 RPS 13 Taillights with RPS13 center garnish 500 Do-Luck Tension gauge Roll Bar 450 Advance Strut Bars brought back from japan front, rear 100 Bride Zeta III Seat red , with head, lumbar, leg pads 500 Red suede glove box, center console panel w/ shift boot, door panels 250 ARC titanium shift knob short round 110 Nardi Deep corn steering wheel black with red stitch 210 Nismo Steering wheel hub 45 Blitz BLM 60mm Boost, EGT, Pressure, Temp Gauge with all sensors 550 Blitz SBC Id black boost controller 375 Blitz RFit Fuel controller NEW 350 Bride S13,S14, S15 Seat bracket 125 SR20DET 5 speed manual transmission 300 B&M Short Shifter 150 Laser cut 3 60mm gauge holder for center Vents 15 SR20DET cam angle sensor 150 Power Steering pump no pulley 50 Alternator no pulley 50 Gramlight 57s Pro Greenish Gunmetal 5lug 18x8.5 +5 18x10.5 +5 Yokohama es100 tires pretty worn in the rear perfect fit for widebody s13. 1100 Clarion MP3 Head Unit some cheap one. 50 All parts are for an s13 unless otherwise stated. Ask if you want to know if it works on your car. Prices are negotiable if you buy more then one item. The car is still complete right now but I'm starting the dismantaling phase this weekend and I should befinished the weekend after thanksgiving. I can take off what ever people want first this weekend as I continue to tear it down. Local pick up is okay in Tustin or I can bring to work with me in Santa Fe Springs. Email me for a shipping quote.

11-26-2006, 05:37 PM	#6
Lastexile User Join Date: Nov 2006 Posts: 1	Interested in some of your stuff... Sad to see a pretty car being taken apart but, at least ppl can benefit from it. :P Alrite, I'm interested in the: Do-Luck Tension gauge Roll Bar 450 - is this aluminum 1 or steel??? Setrab Oil cooler, Stainless lines, Oil Filter relocation, Block adapter 350 - when you say block adapter do you mean just a sandwich plate or does it take the place of the oil filter housing, where oil filter woudl normally bolt up??? email me at aeonflux268766@aol.com with just a lil bit more info and i would love to take them pieces of yer hands... -kyle

01-28-2007, 09:07 PM	#10
throwedtexan User Join Date: Jan 2007 Posts: 1	panels interested in the door panels if they're power, glove box ,etc. shipped to 84720

02-07-2007, 10:54 AM	#11
jspec240 Registered User Join Date: Oct 2005 Location: Bakersfield Posts: 39	parts would you work a deal out with the bm shifter and the khs bov w hot pipe?

02-24-2007, 09:45 PM	#14
Unknown_Slide Registered User Join Date: Jan 2005 Location: San Diego Posts: 20	ruca still have those rucas email rtimbol@sbcglobal.net

11-19-2006, 07:59 AM	#2
mandle User Join Date: Sep 2005 Location: mascotte florida Posts: 12	hi there i am interested in the greddy pulley kit and the greddy oil catch can can you let me know how much shipping is to 34753 thanks

11-21-2006, 01:10 PM	#3
vietchink Registered User Join Date: Nov 2006 Posts: 3	Hey, how much did you want for the shell? I'm thinking of taking the shell, body kit, fenders, and lights and maybe the wing too. How much for all of it, and how much is it for just the shell? I live in Anaheim so I can come pick it up.

11-21-2006, 06:00 PM	#4
Bstone User Join Date: Mar 2006 Posts: 8	I'll take the Laser cut 3 60mm gauge holder for center Vents for $15 plus shipping to 46250.

11-23-2006, 01:50 AM	#5
inuinc Registered User Join Date: Nov 2004 Location: SoCal Posts: 8	Can you email me? I'm having problems with my account allowing me to send any out to forum members. There are a couple of items I may be interested in. Thanks

11-27-2006, 05:47 PM	#7
akumaet Registered User Join Date: Jul 2004 Location: Palm Springs/Moreno Valley ca Posts: 10	how much for the complete engine minus the turbo setup?

12-14-2006, 01:03 PM	#8
gan-san User Join Date: Dec 2006 Posts: 1	any chance of getting those hubs? i could really use email me at ggiwin@hotmail.com

12-28-2006, 02:05 AM	#9
fepst3r User Join Date: Dec 2006 Posts: 1	Bride Zeta III Seat red , with head, lumbar, leg pads 500 do u still have this and is it a pair?

02-15-2007, 07:21 AM	#12
NEVERLIFT Registered User Join Date: Feb 2006 Posts: 5	crap man I'll take the front kouki lights for 30+shipping also how much for the rucas? email me at sus2josh@comcast.net

02-15-2007, 10:53 PM	#13
fenderfatstrat User Join Date: Feb 2007 Posts: 1	hello do you have a screen name we can talk on i have a few parts in intersted in my screen name is Fenderfatstrat6 on aim and yahoo thanks! Jeremy

02-27-2007, 08:43 AM	#15
JDMSR20 User Join Date: Feb 2007 Location: Oakdale, MN Posts: 1	SR20 Parts Hi, what do you still have? Let me know, I want your Nismo LSD, HKS BOV w/ hotpipe, Greddy IM, ARC radi cap, and Greddy Catch can. Let me know ASAP. Thanks.

03-12-2007, 09:02 PM	#16
motoman6968 User Join Date: Mar 2007 Posts: 1	I am interested in the clutch and flywheel, how much has it been used? can I use paypal?

04-02-2007, 05:10 PM	#17
dwada Registered User Join Date: Mar 2007 Posts: 2	Hi i'm interested in the downpipe, the injecters, and the clutch slave Pm me back or email at dwadahi1@yahoo.com Thanks

04-07-2007, 11:07 PM	#18
Rotary Magic Registered User Join Date: Nov 2004 Posts: 53	PM me or email me back at evenflow88@yahoo.com about the seat and harness and maybe steering wheel thanks

04-16-2007, 11:01 AM	#19
iquiksilvri User Join Date: Apr 2007 Posts: 2	Bride seats and CAS Interested in the bride seat(s) if you still have them and also the cam angle sensor. Will pick up at either location..

04-17-2007, 04:23 PM	#20
iquiksilvri User Join Date: Apr 2007 Posts: 2	Cas Interested in cam angle sensor.. where are you located? shipped to 90840.. Thanks..

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: