![]() |
|||||||||||
|
|
|||||||||||
|
|||||||||||
|
|
|
|||||||
This is a discussion on WTT S4.5 FC T2 for an FD within the Buy and Sell Area forums, part of the Classifieds category; Let me start off by saying that I am not going to part out or sell this car. I am ...
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
#1 |
|
User
Join Date: Jul 2006
Posts: 3
|
WTT S4.5 FC T2 for an FD
Let me start off by saying that I am not going to part out or sell this car. I am looking for a straight trade, maybe with a little bit of extra money on my end. I would like to trade my FC t2 for an FD. The FD I am looking for must have the following; No sunroof, 5spd, & in running condition. The only difference when my car changes hands will be that I keep the seat (it is the only one that will fit my fat *Censored**Censored**Censored*), and all of the stickers on the windows will be stripped off.
I would prefer if the FD was in stock or near stock form, but if you have an FD with some light-mild mods and want to trade then that would be fine as well. Here are the specs of my car Also, I will have all of the smog paperwork to hand over, making it legal to drive on the street. 1987 Turbo2 JDM S5 T2 engine ==Engine HKS SuperMegaFlow air filter Ported Waste gate Apexi GT Spec 3" turbo back Warboro 255 fuel pump RacingBeat FCD ==Brakes Hawk HP+ brake pads all around MazdaTrix Steel Braided Brake Lines Power Slot rotors ==Suspension JIC FLTA2RS 8kg/8kg w/ helper spring Mazdatrix Sway bar End Links AWR Rear Lateral Links (Toe Adjusters) AWR Rear Camber Adjusters Super Now Tie Rod Ends (bump steer eliminators) Secret Element Super Angle Spacers ==Chassis 97% Gutted (have not removed anything from under the dash) Cusco front under brace Ebay rear strut brace Mazdatrix DTSS Bushing Energy Suspension Polyurethane Bushings MMR UHMW Rear Subframe Bushings MMR UHMW Rear Differential Bushings Racing Beat Competition Front Differential Mount MMR UHMW Transmission Mounts ==Drivetrain ==Interior DIYSPL Bucket Seat 320mm Steering wheel ==Exterior Japanese Rx7 folding mirrors ANNIVERSARY Racing Factory Front bumper cowl 17x8+30 Mustang Cobra wheels (with 10mm Fighter Garage spacer) 17x8+30 Mustang Cobra wheels in rear Front ARP 3.25" Wheel Studs ==Miscellaneous Removed rats nest Removed emissions Removed a/c Koyo Radiator PA system Mazda Racing Dual Alternator belt pulley All pictures can be found here http://s25.photobucket.com/albums/c7...r/6%2016%2007/ The chassis is straight, the one picture of the damaged part is because of a blow out on the freeway the tread ripped off and slapped the end of the wheel well. This can be hidden with the addition of a rear bumper valence. The chassis has 176k mi, and the engine has around 50k (second engine). The oil has been changed every 2500 miles. The tranny oil, radiator fluid, and LSD fluid have been changed every 7500 miles. I have never over heated the engine (max temp at 50%). This car has never seen a track, but has seen a few spirited runs on a canyon road. The engine pulls hard and runs very well all throughout the power band, there is no 3500rpm hesitation, and boost kicks in around 3400rpm. The car is located in Fallbrook, CA 92028 and I am willing to drive the car, at most, 2 hours away to drop it off, however I will not drive the 2 hours away just to have you look and drive the car. If you just want to check it out you can head to my place. Send me an e-mail or respond to this message if you are interested fc3slider@yahoo.com Thanks, Zach |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|