180sx in Cali, Not street legal, $15,000

AlexPfeiffer · 09-24-2007, 09:14 AM

So now that the nopi season is done, its time to sell the car. Asking 15,000

Many of you have seen the car so you know the condition of it. Its not perfect but all the parts only have a few events on it. Here is a quick list,

AC works and is cold
JDM mirrors work
power windows
Half the interior is still in the car and is in alright shape
New seat belts
B-Ver cage
B-Ver suspension arms, all of them
subframe spacers
Tein super drifts
Rack bushings replaced
Steering coupler replaced with solid
Nismo power brace for tension rods
ACT clutch, one event old
Griffen rad, one event old
Kaaz dif
C's short shifter
5 lug conversion
17x9's 17x10's FN's
Uras body kit
Ait hood and front fenders

Motor wise,
stock bottom
BC cams, springs, retainers
Gready oil pan
Gready front mount
300zx afm
power fc
740 injectors
nissmo fpr
wallboro fuel pump
head studs with metal gasket
phase2 oil relocation thing on block, w/ remote oil cooler and front mount oil cooler, setrab
exhaust manifold, down, and straight pipe
GT28rs turbo w/oil line and water line kits
Made 340 to the wheels at 1.2 bar but have been running it at 1 bar with pump gas.

The car is red vinyled right now.....

I know I could get more for it if I parted it out but I just want the whole thing gone so i can start on the next project before next year comes.

Alex@battleversion.com

Slapshotnerd · 09-24-2007, 11:53 AM

Vinyl - the new flat black!

09-24-2007, 09:14 AM	#1
AlexPfeiffer Driver Join Date: May 2004 Posts: 765	180sx in Cali, Not street legal, $15,000 So now that the nopi season is done, its time to sell the car. Asking 15,000 Many of you have seen the car so you know the condition of it. Its not perfect but all the parts only have a few events on it. Here is a quick list, AC works and is cold JDM mirrors work power windows Half the interior is still in the car and is in alright shape New seat belts B-Ver cage B-Ver suspension arms, all of them subframe spacers Tein super drifts Rack bushings replaced Steering coupler replaced with solid Nismo power brace for tension rods ACT clutch, one event old Griffen rad, one event old Kaaz dif C's short shifter 5 lug conversion 17x9's 17x10's FN's Uras body kit Ait hood and front fenders Motor wise, stock bottom BC cams, springs, retainers Gready oil pan Gready front mount 300zx afm power fc 740 injectors nissmo fpr wallboro fuel pump head studs with metal gasket phase2 oil relocation thing on block, w/ remote oil cooler and front mount oil cooler, setrab exhaust manifold, down, and straight pipe GT28rs turbo w/oil line and water line kits Made 340 to the wheels at 1.2 bar but have been running it at 1 bar with pump gas. The car is red vinyled right now..... I know I could get more for it if I parted it out but I just want the whole thing gone so i can start on the next project before next year comes. Alex@battleversion.com __________________ BattleVersion Mishimoto DDay Kaaz G-Dimension P2M BrianCrower CPpistons K&Wautobody Drifting.com RaysWheels SpeedOMotive Rotora AIT Racing AODA HouseOfKolor CompetitionClutch BullseyePower Last edited by AlexPfeiffer; 09-24-2007 at 06:16 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

09-24-2007, 11:53 AM	#2
Slapshotnerd Registered User Join Date: Jan 2005 Posts: 1,919	Vinyl - the new flat black!