92 SC300 with swap..cage..fuel cell ready to race

konspec · 08-05-2010, 09:15 PM

1992
Lexus SC300 (factory 5speed)
no accident history
162000 miles on body
48000 miles on motor
$8,500

Mods:

Drivetrain:
Spec stage 2 Clutch
Fidanza Flywheel
KAAZ 2 way
Factory trans (perfect, no syncro issues at all)
ENkI RPF1 front- 18x9.5 +12 Rear- 18x10.5 +12
Conti front tires 60% tread Rear AVON 90% tread

Suspension:
Stance GR + coils custom valving and spring rates (18k 14K) corner balanced
Aluminum diff bushings and subframe bushings

Body:
Origin front and side skirts Quarter turn fasteners (no damage)
no rust...at all
6 point cage (x brace and welded rear strut brace..NASA spec)

Engine:
1JZ from JHot (great condition)
Toyo alum. rad
Front Mount (custom pipe routing)
HKS bov
Greddy Profec B Spec II boost controler
Power FC (yes a power FC for a Soarer)
Powersport Oil, EGT, Boost, water gauges
AEM wideband
Battery relo (dry cell, welded tray)
Kill switch (reg. Wired to alternator and battery, welded to cage)
13 gallon Fuel safe cell( rear tire well cut out, mounted 12in back and 14in lower then factory tank. Fully box welded protection cage, sealed exterior, to spec for all racing sanctions... this cost me a ton to do right)
Aeromotive external fuel pump with Dual inline filters
Full stainless lines Under car heat wrapped
APR
Painless fuse box for all accessories
HKS exhaust (alum. custom made heat shield

Interior:

Bare bones
I have all factory pieces if needed
Corbeau F1 pro racing seat with sliders
Nardi Steering wheel (can't remember the model, purchase at Autobacs in tokyo
Sparco 5point 3inch belt

All mods have less then 1k miles

Hopefully I'm not missing anything but, this has been a labor of love. I didn't just slap parts in this car. I had to wait forever to find a power FC so, that's another hassle you won't have to go through. The cage and fuel cell were built by a local race shop with no expense spared. The fuel cell is a work of art...completely over built for the current set up but, I had bigger plans so the car is ready for a large turbo. I was building this car to race but, it took a long time, cost a ton of money, and I have a house and wife to put money into now. THis thing never made it to a race track. All of the headaches are over it just needs some paint to be pretty. The car is almost perfect balance after having it on the scales. The spring rates are perfect for the change in weight dist. Everything has redline fluids...even the pumpkin was wire brushed and painted. I'm going to miss this car but, didn't realize how big of a project this would be when I started. The time and money got out of hand but, at least everything is done right

I have LS400 brakes but they're not installed..their included
This car just need some time that I don't have to make it look nice but, it's ready to go! Good AF ratio, tranny is perfect, and extremely well balanced.

Seriously save yourself a ton of time, money, and get out there and race. And yes this car is inspected for street use. I drove it to work for 2 weeks.

Things it needs:
finish stripping sound material
I'd put race panel on the doors
Paint of your choice (body work is already done)
Speedo and Tach needles don't light up

PM, Email, or call with questions
dprinzo32@gmail.com
412-983-6662

konspec · 08-11-2010, 09:42 PM

more pics...emails answered

vervius · 08-18-2010, 07:40 PM

gangster! but too far, glws!

konspec · 08-30-2010, 09:10 AM

Quote:

Originally Posted by vervius

gangster! but too far, glws!

Just so everyone knows...I'd be willing to discuss shipping options.

Bebop · 08-30-2010, 10:28 PM

nioce vehicle!

Flannel_Friend · 09-17-2010, 03:19 PM

I wish I had the money GLWS

theSidesweep · 09-23-2010, 06:51 PM

literally my dream car, every single thing about it. wish i wasn't away at college

konspec · 10-04-2010, 02:02 PM

emails have been answered

konspec · 10-20-2010, 08:37 PM

sale pending for Saturday, will keep you updated

konspec · 10-26-2010, 07:04 AM

the prospective buyer had to reschedule and I haven't heard back so, I'm going to say it's back on the market.

konspec · 10-29-2010, 09:43 AM

looking to move this before winter...someone can get a great deal..open to offers (not trades)

Cavi Mike · 10-31-2010, 12:33 AM

I was reading this like I found a soul mate on a dating website until I saw you put a 2.5L in it.

konspec · 10-31-2010, 12:18 PM

Hmm thanks for the comment?

konspec · 11-03-2010, 07:14 AM

sale pending for this sat.

SLIDEtoDIE · 11-07-2010, 01:58 PM

Just sent you a pm

tekalpha86 · 11-16-2010, 11:30 AM

Nice setup. I building mine for street use. I wish i had the money to buy yours though....

08-05-2010, 09:15 PM	#1
konspec Registered User Join Date: Aug 2005 Location: Pittsburgh, PA Posts: 15	92 SC300 with swap..cage..fuel cell ready to race 1992 Lexus SC300 (factory 5speed) no accident history 162000 miles on body 48000 miles on motor $8,500 Mods: Drivetrain: Spec stage 2 Clutch Fidanza Flywheel KAAZ 2 way Factory trans (perfect, no syncro issues at all) ENkI RPF1 front- 18x9.5 +12 Rear- 18x10.5 +12 Conti front tires 60% tread Rear AVON 90% tread Suspension: Stance GR + coils custom valving and spring rates (18k 14K) corner balanced Aluminum diff bushings and subframe bushings Body: Origin front and side skirts Quarter turn fasteners (no damage) no rust...at all 6 point cage (x brace and welded rear strut brace..NASA spec) Engine: 1JZ from JHot (great condition) Toyo alum. rad Front Mount (custom pipe routing) HKS bov Greddy Profec B Spec II boost controler Power FC (yes a power FC for a Soarer) Powersport Oil, EGT, Boost, water gauges AEM wideband Battery relo (dry cell, welded tray) Kill switch (reg. Wired to alternator and battery, welded to cage) 13 gallon Fuel safe cell( rear tire well cut out, mounted 12in back and 14in lower then factory tank. Fully box welded protection cage, sealed exterior, to spec for all racing sanctions... this cost me a ton to do right) Aeromotive external fuel pump with Dual inline filters Full stainless lines Under car heat wrapped APR Painless fuse box for all accessories HKS exhaust (alum. custom made heat shield Interior: Bare bones I have all factory pieces if needed Corbeau F1 pro racing seat with sliders Nardi Steering wheel (can't remember the model, purchase at Autobacs in tokyo Sparco 5point 3inch belt All mods have less then 1k miles Hopefully I'm not missing anything but, this has been a labor of love. I didn't just slap parts in this car. I had to wait forever to find a power FC so, that's another hassle you won't have to go through. The cage and fuel cell were built by a local race shop with no expense spared. The fuel cell is a work of art...completely over built for the current set up but, I had bigger plans so the car is ready for a large turbo. I was building this car to race but, it took a long time, cost a ton of money, and I have a house and wife to put money into now. THis thing never made it to a race track. All of the headaches are over it just needs some paint to be pretty. The car is almost perfect balance after having it on the scales. The spring rates are perfect for the change in weight dist. Everything has redline fluids...even the pumpkin was wire brushed and painted. I'm going to miss this car but, didn't realize how big of a project this would be when I started. The time and money got out of hand but, at least everything is done right I have LS400 brakes but they're not installed..their included This car just need some time that I don't have to make it look nice but, it's ready to go! Good AF ratio, tranny is perfect, and extremely well balanced. Seriously save yourself a ton of time, money, and get out there and race. And yes this car is inspected for street use. I drove it to work for 2 weeks. Things it needs: finish stripping sound material I'd put race panel on the doors Paint of your choice (body work is already done) Speedo and Tach needles don't light up PM, Email, or call with questions dprinzo32@gmail.com 412-983-6662

08-18-2010, 07:40 PM	#3
vervius Registered User Join Date: Feb 2004 Posts: 227	gangster! but too far, glws! __________________ Your friends will bail u out of jail..but ur best friend will be right beside u sayin "that was bloody brilliant!!!!!"

08-30-2010, 10:28 PM	#5
Bebop Registered User Join Date: Dec 2005 Location: 951 Posts: 2,420	nioce vehicle! __________________ Favorite Pro: USA - JTP JAP -Tetsuya Hibino Favorite Privateer: USA -John Russakoff JAP - Mitsuru Haruguchi Favorite Overall Team Bergenholtz Favorite Course: FD - LVMS(08 setup) D1 - Bihoku Circuit

10-31-2010, 12:33 AM	#12
Cavi Mike Registered User Join Date: Oct 2005 Location: Rochester, NY USA Posts: 456	I was reading this like I found a soul mate on a dating website until I saw you put a 2.5L in it. __________________ I'm just a fan that likes to see cars going sideways, tires up in smoke, putting smiles on everybody's faces ~understar

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

08-11-2010, 09:42 PM	#2
konspec Registered User Join Date: Aug 2005 Location: Pittsburgh, PA Posts: 15	more pics...emails answered

09-17-2010, 03:19 PM	#6
Flannel_Friend Registered User Join Date: Aug 2010 Posts: 1	I wish I had the money GLWS

09-23-2010, 06:51 PM	#7
theSidesweep Registered User Join Date: Sep 2010 Posts: 34	literally my dream car, every single thing about it. wish i wasn't away at college

10-04-2010, 02:02 PM	#8
konspec Registered User Join Date: Aug 2005 Location: Pittsburgh, PA Posts: 15	emails have been answered

10-20-2010, 08:37 PM	#9
konspec Registered User Join Date: Aug 2005 Location: Pittsburgh, PA Posts: 15	sale pending for Saturday, will keep you updated

10-26-2010, 07:04 AM	#10
konspec Registered User Join Date: Aug 2005 Location: Pittsburgh, PA Posts: 15	the prospective buyer had to reschedule and I haven't heard back so, I'm going to say it's back on the market.

10-29-2010, 09:43 AM	#11
konspec Registered User Join Date: Aug 2005 Location: Pittsburgh, PA Posts: 15	looking to move this before winter...someone can get a great deal..open to offers (not trades)

10-31-2010, 12:18 PM	#13
konspec Registered User Join Date: Aug 2005 Location: Pittsburgh, PA Posts: 15	Hmm thanks for the comment?

11-03-2010, 07:14 AM	#14
konspec Registered User Join Date: Aug 2005 Location: Pittsburgh, PA Posts: 15	sale pending for this sat.

11-07-2010, 01:58 PM	#15
SLIDEtoDIE Registered User Join Date: Nov 2010 Posts: 1	Just sent you a pm

11-16-2010, 11:30 AM	#16
tekalpha86 Registered User Join Date: Nov 2010 Location: Leesburg, Virginia Posts: 1	Nice setup. I building mine for street use. I wish i had the money to buy yours though....