FS: Tanabe Strut Bar Sale (Cheap)

Chas · 12-02-2003, 11:54 PM

Sustec Strut Tower Bar
Whenever driving aggressively, a vehicle's suspension can only work just a hard as the stiffness of the chassis permits. Increase the rigidity of the vehicle's frame resulting in improved, predictable handling. A reinforced lip is used to reduce bending of the bar. A specially designed bar with a hollow center and reinforced side walls for increased rigidity and reduced weight, extremely flex resistant. A polished finish for added good looks.

List is 125 Sell for 100. Shipping is 15. Its a good buy, very nice bar.

See www.tanabe-usa.com for full applacation list.

S2000 (AP1) 99-
IS300 (JCE10L)
SC300 (JZZ30)
Miata (NA6(8)C) 90-98
RX-7 (FC3S) 86-92
RX-7 (FD3S) 93-97
RX-8 (FE3S) 04-
240SX (S13) 89-94 (Except SOHC)
240SX (S14) 95-98
Corolla (AE86) 85-87
MR-2 (SW20)
MR-2 Spyder
Supra (MA70) 87-92 TBA
Supra (JZA80) 93-98

Chas · 12-02-2003, 11:59 PM

Sale Ends DEC 30th. Thanks

stretch240sx · 12-04-2003, 10:04 PM

hey where in del mar are you? ill give you 90 if we can meet.

it is for the front right?

Chas · 12-04-2003, 11:27 PM

Sorry i cant go below this price, there not used, there BRAND new pieces. We can meet and ill dilever and install it for free. Where are you located in SD?

Chas · 12-04-2003, 11:28 PM

Front or Rear, any bar tanabe makes

stretch240sx · 12-04-2003, 11:29 PM

im in oceanisde...
if you deliver and install it thatll be sick, jsut gotta wait till i get my new atm car so i can take some money out...

Chas · 12-05-2003, 09:08 AM

K, no problem.

ACDSupra7 · 12-05-2003, 09:15 AM

MA70 TBA, eh? Cool. And by the time you know if they're availible, I'll probably decide whether I want to straighten up the front or the rear -_^

Keep me posted!

TanabeUSA · 12-05-2003, 07:34 PM

ACDSupra,

The MA70 Tower bars should be available very soon. We finished the R&D as well as production prototype testing several months ago.

We do have chromoly stabilizer bars, available now!

z33Drifter · 12-05-2003, 09:51 PM

aww none for the z33/ 350z???

-=S14=- · 12-05-2003, 10:13 PM

HOw much for every bar and brace for a S14? And what about that buddy club exhaust????

Ryan

Chas · 12-06-2003, 12:48 AM

We will have them when they get done.

S14. For both underbraces its going to cost 265, plus the 200 for both sturt bars. Thats tanabe parts. Do you want the Do-luck stuff to?

Ill cehck on the BC exhaust.

-=S14=- · 12-06-2003, 10:59 AM

Quote:

Originally posted by Chas
We will have them when they get done.

S14. For both underbraces its going to cost 265, plus the 200 for both sturt bars. Thats tanabe parts. Do you want the Do-luck stuff to?

Ill cehck on the BC exhaust.

if you get decent prices on the Do-Luck stuff then I might go ahead and do that 2.

Ryan

Chas · 12-06-2003, 04:01 PM

Ill post them up soon.

Chas · 12-07-2003, 12:44 PM

Now on sale. Tanabe Sustec underbraces.

Get an edge over the competition and shave time off your laps. Underbody rigidity influences the suspension geometry while cornering thus making the responsiveness of how the vehicle handles inconsistent. Sustec Under Brace connects the vehicle's lower arms for increased rigidity while reducing chassis flex under cornering loads. Engineered using a "Double I-beam" design for lightweight construction and increased structural rigidity, experience sharper responsiveness either on the street or at the track.

Front and rear on sale. Check Here for apps. Tanabe Underbrace List

Prices are as follows:

2 Point braces: 85
4 Point braces: 195

monkeymagic · 12-07-2003, 12:59 PM

do they make them for 92 integras ls cause i have one and its all stock and man it has soooo much body roll it crazy. alright thanx chas

Chas · 12-07-2003, 01:09 PM

Everything i see fron Tanabe and JIC is 94 and up. I will see if it will still fit though.

monkeymagic · 12-07-2003, 01:24 PM

ok thanx sorry for the trobble

Chas · 12-07-2003, 05:50 PM

No trouble. I will look for a company that makes bars for you car.

Chas · 12-08-2003, 08:50 PM

bumpity bump.

ACDSupra7 · 12-08-2003, 09:29 PM

Patiently awaiting the arrival of the MA70 bars. I've decided to get the ones for the rear. But if there's a deal on buying both, I'll consider that too -_^

The front bar needs to be TEMS compatible though =\

Chas · 12-08-2003, 09:58 PM

ask TanabeUSA

Chas · 12-23-2003, 11:37 PM

ends soon

stretch240sx · 12-28-2003, 12:39 AM

hey chas... you want to sell me that front strut bar? i got the cash now...

Chas · 12-28-2003, 12:55 AM

Yea man.

12-02-2003, 11:54 PM	#1
Chas Guest Join Date: Nov 2003 Location: Huntington Beach Posts: 2,566	FS: Tanabe Strut Bar Sale (Cheap) Sustec Strut Tower Bar Whenever driving aggressively, a vehicle's suspension can only work just a hard as the stiffness of the chassis permits. Increase the rigidity of the vehicle's frame resulting in improved, predictable handling. A reinforced lip is used to reduce bending of the bar. A specially designed bar with a hollow center and reinforced side walls for increased rigidity and reduced weight, extremely flex resistant. A polished finish for added good looks. List is 125 Sell for 100. Shipping is 15. Its a good buy, very nice bar. See www.tanabe-usa.com for full applacation list. S2000 (AP1) 99- IS300 (JCE10L) SC300 (JZZ30) Miata (NA6(8)C) 90-98 RX-7 (FC3S) 86-92 RX-7 (FD3S) 93-97 RX-8 (FE3S) 04- 240SX (S13) 89-94 (Except SOHC) 240SX (S14) 95-98 Corolla (AE86) 85-87 MR-2 (SW20) MR-2 Spyder Supra (MA70) 87-92 TBA Supra (JZA80) 93-98

12-04-2003, 10:04 PM	#3
stretch240sx Honkidori Join Date: Nov 2003 Location: san diego Posts: 159	hey where in del mar are you? ill give you 90 if we can meet. it is for the front right? __________________ 93 blue 240sx F/B life begins at full lock and redline.

12-04-2003, 11:29 PM	#6
stretch240sx Honkidori Join Date: Nov 2003 Location: san diego Posts: 159	im in oceanisde... if you deliver and install it thatll be sick, jsut gotta wait till i get my new atm car so i can take some money out... __________________ 93 blue 240sx F/B life begins at full lock and redline.

12-05-2003, 09:15 AM	#8
ACDSupra7 ACDSevenGuy Join Date: Nov 2003 Location: Los Angeles Posts: 1,148	RE: MA70 TBA, eh? Cool. And by the time you know if they're availible, I'll probably decide whether I want to straighten up the front or the rear -_^ Keep me posted!

12-05-2003, 07:34 PM	#9
TanabeUSA Newbie Join Date: Dec 2003 Location: Torrance, CA Posts: 15	ACDSupra, The MA70 Tower bars should be available very soon. We finished the R&D as well as production prototype testing several months ago. We do have chromoly stabilizer bars, available now! __________________ http://www.tanabe-usa.com/forum/tanabe-usa.gif Tanabe Racing Development, USA We are now taking a limited amount pre-orders on Sustec Pro DD --All US Onigiri Works, since 1999. The miracle of rotary--

12-02-2003, 11:59 PM	#2
Chas Guest Join Date: Nov 2003 Location: Huntington Beach Posts: 2,566	Sale Ends DEC 30th. Thanks

12-04-2003, 11:27 PM	#4
Chas Guest Join Date: Nov 2003 Location: Huntington Beach Posts: 2,566	Sorry i cant go below this price, there not used, there BRAND new pieces. We can meet and ill dilever and install it for free. Where are you located in SD?

12-04-2003, 11:28 PM	#5
Chas Guest Join Date: Nov 2003 Location: Huntington Beach Posts: 2,566	Front or Rear, any bar tanabe makes

12-05-2003, 09:08 AM	#7
Chas Guest Join Date: Nov 2003 Location: Huntington Beach Posts: 2,566	K, no problem.

12-05-2003, 09:51 PM	#10
z33Drifter Newbie Join Date: Nov 2003 Location: Cali Bay Area Posts: 78	aww none for the z33/ 350z??? __________________ http://www.50mb.net/~hiroko/drift/z33top.GIF http://www.50mb.net/~hiroko/drift/hcr32-d1.GIF http://www.50mb.net/~hiroko/drift/z33nismo.GIF http://www.50mb.net/~hiroko/drift/r32-gtr4.GIF http://www.50mb.net/~hiroko/drift/s15-kazama.GIF http://www.50mb.net/~hiroko/drift/s14-g3.GIF

12-05-2003, 10:13 PM	#11
-=S14=- Newbie Join Date: Nov 2003 Posts: 32	HOw much for every bar and brace for a S14? And what about that buddy club exhaust???? Ryan __________________ i <3 ev

12-06-2003, 12:48 AM	#12
Chas Guest Join Date: Nov 2003 Location: Huntington Beach Posts: 2,566	We will have them when they get done. S14. For both underbraces its going to cost 265, plus the 200 for both sturt bars. Thats tanabe parts. Do you want the Do-luck stuff to? Ill cehck on the BC exhaust.

12-06-2003, 04:01 PM	#14
Chas Guest Join Date: Nov 2003 Location: Huntington Beach Posts: 2,566	Ill post them up soon.

12-07-2003, 12:44 PM	#15
Chas Guest Join Date: Nov 2003 Location: Huntington Beach Posts: 2,566	Now on sale. Tanabe Sustec underbraces. Get an edge over the competition and shave time off your laps. Underbody rigidity influences the suspension geometry while cornering thus making the responsiveness of how the vehicle handles inconsistent. Sustec Under Brace connects the vehicle's lower arms for increased rigidity while reducing chassis flex under cornering loads. Engineered using a "Double I-beam" design for lightweight construction and increased structural rigidity, experience sharper responsiveness either on the street or at the track. Front and rear on sale. Check Here for apps. Tanabe Underbrace List Prices are as follows: 2 Point braces: 85 4 Point braces: 195 Last edited by Chas; 12-07-2003 at 12:47 PM.

12-07-2003, 12:59 PM	#16
monkeymagic Registered User Join Date: Dec 2003 Location: westlake Posts: 289	hey do they make them for 92 integras ls cause i have one and its all stock and man it has soooo much body roll it crazy. alright thanx chas

12-07-2003, 01:09 PM	#17
Chas Guest Join Date: Nov 2003 Location: Huntington Beach Posts: 2,566	Everything i see fron Tanabe and JIC is 94 and up. I will see if it will still fit though.

12-07-2003, 01:24 PM	#18
monkeymagic Registered User Join Date: Dec 2003 Location: westlake Posts: 289	ok thanx sorry for the trobble

12-07-2003, 05:50 PM	#19
Chas Guest Join Date: Nov 2003 Location: Huntington Beach Posts: 2,566	No trouble. I will look for a company that makes bars for you car.

12-08-2003, 08:50 PM	#20
Chas Guest Join Date: Nov 2003 Location: Huntington Beach Posts: 2,566	bumpity bump.

12-08-2003, 09:29 PM	#21
ACDSupra7 ACDSevenGuy Join Date: Nov 2003 Location: Los Angeles Posts: 1,148	RE: Patiently awaiting the arrival of the MA70 bars. I've decided to get the ones for the rear. But if there's a deal on buying both, I'll consider that too -_^ The front bar needs to be TEMS compatible though =\

12-08-2003, 09:58 PM	#22
Chas Guest Join Date: Nov 2003 Location: Huntington Beach Posts: 2,566	ask TanabeUSA

12-23-2003, 11:37 PM	#23
Chas Guest Join Date: Nov 2003 Location: Huntington Beach Posts: 2,566	ends soon

12-28-2003, 12:39 AM	#24
stretch240sx Honkidori Join Date: Nov 2003 Location: san diego Posts: 159	hey chas... you want to sell me that front strut bar? i got the cash now... __________________ 93 blue 240sx F/B life begins at full lock and redline.

12-28-2003, 12:55 AM	#25
Chas Guest Join Date: Nov 2003 Location: Huntington Beach Posts: 2,566	Yea man.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: