JEFF JONES New RX-7 @ FORMULA D 2010

Jeff Jones · 03-23-2010, 01:18 PM

Quote:

Originally Posted by RX7Turbodrift

speaking of witch. Jeff you have 17 days to get that bad bear finished! *bites fingernails.*

I'm picking it up from paint to day. Now we have to put all the parts in. I'll try to get the blog up to date .

Jeff Jones · 03-23-2010, 01:25 PM

So the car is going to paint.
Front end off.

Rene is a beast, NOT. This thing doesn’t weigh anything.

The before.

Powered by beans. LOL

Off to Donlyson Auto Concepts.

Playing around on Forza 3. Possible out come.

Ok some of you being weighting for this so it is.

20b irons.

Jeff Jones · 03-23-2010, 01:27 PM

20b Rotor housings.

Lower intake manifold

Upper intake manifold

Purple powered it up.

This was nasty.

RX7Turbodrift · 03-23-2010, 05:52 PM

purple power is the best. i have a gallon of that stuff sitting in my garage. that and PB blaster lol.

RX7Turbodrift · 03-23-2010, 05:54 PM

i wish i had a ride up to atl to see formula D this year

i won tickets last year but i couldnt make it up there so i had to pass them on.

is formula D gonna be televised this year?

INFO · 03-23-2010, 07:25 PM

RX7Turbodrift · 03-24-2010, 04:55 AM

oo i like that yellow

BigGameHit · 03-24-2010, 08:26 AM

looking good Keisuke

Jeff Jones · 03-25-2010, 12:48 PM

Pic's from picking up the car from Donlyson Auto Concepts.

CelicaDRIFTER · 03-25-2010, 01:12 PM

this car needs a BN Sports kit. ha

P.Haire · 03-25-2010, 02:12 PM

yeah dude!!

Stannyboy · 03-25-2010, 03:43 PM

car looks good Jeff. Francis is a awesome guy and the work at Donlyson is fantastic. they straightened out my frame no more pro am wall reminders haha

INFO · 03-25-2010, 07:38 PM

Bebop · 03-25-2010, 07:57 PM

I'm tired of the blister...

type-1... make molds.

Jeff Jones · 03-26-2010, 12:50 AM

I'm down if some one sends me one. I'm just going to rock this until it gets smashed.

BigGameHit · 03-26-2010, 12:57 AM

man I like the motor paint scheme

RX7Turbodrift · 03-26-2010, 02:48 AM

i like how it looks like a bumble bee. hah. its a thing of pure beauty.

AtomikJDM · 03-28-2010, 01:48 PM

You can never go wrong with a good rx7. I can't wait to see it when it's finished.

Jeff Jones · 03-29-2010, 12:59 AM

Here’s the car getting prepped for paint.

Upper Intake manifold paint drying up.

Got the Rotary attack space ships ready. I love that shirt.

I stopped by Clutch Net to pick up my custom clutch.
Mazda pressure plate Toyota four puck disc.

Oleg the owner gave me the approval for a few pictures of work in progress.
These discs are waiting for the centers to be installed.

Here’s Oleg hard at work. Almost every thing is made in house.

There’s a lot more machines like this in the next room.

Jeff Jones · 03-29-2010, 01:43 AM

Pressure plate assembly.

I was told this was really, really old.

Here’s a video of the facility from there site. www.clutchnet.com

I’ve got plans for this.

Boring motor stuff. I’ll just skip this part.

RX7Turbodrift · 03-29-2010, 10:02 AM

no such as boring motor stuff when it comes to rotors.

Jeff Jones · 04-01-2010, 03:40 AM

Got The EBC Brakes in for the fd.

EBC is now one of my biggest sponsors.
Check out the advertisement of my s13, in most import magazines.

Finally installing the LSD.

Pictures I took when I picked the car up from Donlyson.

the kit still needs paint

20bee paint .

Jeff Jones · 04-01-2010, 03:44 AM

Assemble

diff mount

Rotary-Works throttle body

so I got a clutch off a 200sx and mad it work.

Little drilling and some cut and weld.

The dash has arrived.

Jeff Jones · 04-01-2010, 03:47 AM

Old brakes out

EBC in

Custom transmission mount.

Solid motor mounts. Still need to be braced.

Time to get it all in

got all my hoses and pressure lines made at VF Sales.

26 feet of braided -10
20 feet of -8
and lots of other stuff. $250.
That’s a good deal.

This is no fun

Formula D requires a fire suppressant system now.

Slapshotnerd · 04-01-2010, 10:42 AM

Jeff - how much do you have to fix after the FD Tech day?

03-23-2010, 07:25 PM	#56
INFO Join Date: May 2004 Posts: 4,787	__________________ DRIFTING.com @ FACEBOOK DRIFTING.com @ FACEBOOK DRIFTING.com @ TWITTER DRIFTING.com TWITTER DRIFTING.com STORE DRIFTING.com Tel.(877) 786-7694 The BEST WAY to reach DRIFTING.com is by calling between 11AM-5PM (PACIFIC STANDARD TIME) If you are on the EAST COAST then call at 2PM. If you reach our voicemail then CALL BACK AGAIN between 11AM-5PM (PACIFIC STANDARD TIME)

03-24-2010, 08:26 AM	#58
BigGameHit Registered User Join Date: Jul 2008 Location: MD/Misawa AFB, Japan Posts: 373	looking good Keisuke __________________ My Racing Profile Html Diy's

03-25-2010, 01:12 PM	#60
CelicaDRIFTER Registered User Join Date: Jun 2004 Location: downey, ca Posts: 181	this car needs a BN Sports kit. ha __________________ Garage BOSO R. Rabe Body & Paint Automotive Plastic Surgeon

03-25-2010, 07:38 PM	#63
INFO Join Date: May 2004 Posts: 4,787	__________________ DRIFTING.com @ FACEBOOK DRIFTING.com @ FACEBOOK DRIFTING.com @ TWITTER DRIFTING.com TWITTER DRIFTING.com STORE DRIFTING.com Tel.(877) 786-7694 The BEST WAY to reach DRIFTING.com is by calling between 11AM-5PM (PACIFIC STANDARD TIME) If you are on the EAST COAST then call at 2PM. If you reach our voicemail then CALL BACK AGAIN between 11AM-5PM (PACIFIC STANDARD TIME)

03-26-2010, 12:57 AM	#66
BigGameHit Registered User Join Date: Jul 2008 Location: MD/Misawa AFB, Japan Posts: 373	man I like the motor paint scheme __________________ My Racing Profile Html Diy's

03-23-2010, 01:25 PM	#52
Jeff Jones Registered User Join Date: Aug 2008 Posts: 49	So the car is going to paint. Front end off. Rene is a beast, NOT. This thing doesn’t weigh anything. The before. Powered by beans. LOL Off to Donlyson Auto Concepts. Playing around on Forza 3. Possible out come. Ok some of you being weighting for this so it is. 20b irons.

03-23-2010, 01:27 PM	#53
Jeff Jones Registered User Join Date: Aug 2008 Posts: 49	20b Rotor housings. Lower intake manifold Upper intake manifold Purple powered it up. This was nasty.

03-23-2010, 05:52 PM	#54
RX7Turbodrift Registered User Join Date: May 2009 Posts: 25	purple power is the best. i have a gallon of that stuff sitting in my garage. that and PB blaster lol.

03-23-2010, 05:54 PM	#55
RX7Turbodrift Registered User Join Date: May 2009 Posts: 25	i wish i had a ride up to atl to see formula D this year i won tickets last year but i couldnt make it up there so i had to pass them on. is formula D gonna be televised this year?

03-24-2010, 04:55 AM	#57
RX7Turbodrift Registered User Join Date: May 2009 Posts: 25	oo i like that yellow

03-25-2010, 12:48 PM	#59
Jeff Jones Registered User Join Date: Aug 2008 Posts: 49	Pic's from picking up the car from Donlyson Auto Concepts.

03-25-2010, 02:12 PM	#61
P.Haire Registered User Join Date: Mar 2007 Location: gnashville TN Posts: 101	yeah dude!!

03-25-2010, 03:43 PM	#62
Stannyboy Registered User Join Date: Sep 2004 Location: 818 Area... Posts: 383	car looks good Jeff. Francis is a awesome guy and the work at Donlyson is fantastic. they straightened out my frame no more pro am wall reminders haha

03-25-2010, 07:57 PM	#64
Bebop Registered User Join Date: Dec 2005 Location: 951 Posts: 2,420	I'm tired of the blister... type-1... make molds.

03-26-2010, 12:50 AM	#65
Jeff Jones Registered User Join Date: Aug 2008 Posts: 49	I'm down if some one sends me one. I'm just going to rock this until it gets smashed.

03-26-2010, 02:48 AM	#67
RX7Turbodrift Registered User Join Date: May 2009 Posts: 25	i like how it looks like a bumble bee. hah. its a thing of pure beauty.

03-28-2010, 01:48 PM	#68
AtomikJDM Registered User Join Date: Mar 2010 Location: SoCal Posts: 23	You can never go wrong with a good rx7. I can't wait to see it when it's finished.

03-29-2010, 12:59 AM	#69
Jeff Jones Registered User Join Date: Aug 2008 Posts: 49	Here’s the car getting prepped for paint. Upper Intake manifold paint drying up. Got the Rotary attack space ships ready. I love that shirt. I stopped by Clutch Net to pick up my custom clutch. Mazda pressure plate Toyota four puck disc. Oleg the owner gave me the approval for a few pictures of work in progress. These discs are waiting for the centers to be installed. Here’s Oleg hard at work. Almost every thing is made in house. There’s a lot more machines like this in the next room.

03-29-2010, 01:43 AM	#70
Jeff Jones Registered User Join Date: Aug 2008 Posts: 49	Pressure plate assembly. I was told this was really, really old. Here’s a video of the facility from there site. www.clutchnet.com I’ve got plans for this. Boring motor stuff. I’ll just skip this part.

03-29-2010, 10:02 AM	#71
RX7Turbodrift Registered User Join Date: May 2009 Posts: 25	no such as boring motor stuff when it comes to rotors.

04-01-2010, 03:40 AM	#72
Jeff Jones Registered User Join Date: Aug 2008 Posts: 49	Got The EBC Brakes in for the fd. EBC is now one of my biggest sponsors. Check out the advertisement of my s13, in most import magazines. Finally installing the LSD. Pictures I took when I picked the car up from Donlyson. the kit still needs paint 20bee paint .

04-01-2010, 03:44 AM	#73
Jeff Jones Registered User Join Date: Aug 2008 Posts: 49	Assemble diff mount Rotary-Works throttle body so I got a clutch off a 200sx and mad it work. Little drilling and some cut and weld. The dash has arrived.

04-01-2010, 03:47 AM	#74
Jeff Jones Registered User Join Date: Aug 2008 Posts: 49	Old brakes out EBC in Custom transmission mount. Solid motor mounts. Still need to be braced. Time to get it all in got all my hoses and pressure lines made at VF Sales. 26 feet of braided -10 20 feet of -8 and lots of other stuff. $250. That’s a good deal. This is no fun Formula D requires a fire suppressant system now.

04-01-2010, 10:42 AM	#75
Slapshotnerd Registered User Join Date: Jan 2005 Posts: 1,902	Jeff - how much do you have to fix after the FD Tech day? __________________ ~ Jacob I am who I am, I do what I do. Some of it includes drifting!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: