new turbotechnique drift project ford escort wrc

cossie78 · 05-31-2010, 10:08 AM

base :
we take wrc type but with formulaD spec

car base ford escort 1.6 16v rebuild cosworth wrc :

rear end mustang
weigh transfer radiator,fuel tank,steering pump on rear axle
front in aluminium pipe

rear pipe light

dashboard carbon
wheels 18 rear par 10"
wheels 17 front par 7.5/8"

shell after work and powder paint i think the same

front same of that

rear same of that

our website site du drift team turbotechnique

cossie78 · 05-31-2010, 10:09 AM

shell :
build carbon roof
remove :
-rear wings type cosworth gra
-front wings wrc
-carbon bonnet
-doors carbone

-window makrolon
-wing carbon porsche gt3

suspension :
coilover
roll bar adjustable

front :
escort cosworth
brake 330mm 6 pistons

rear end :
rear end mustang 1600mm 4 holes
4 links
4 calipers http://i303.photobucket.com/albums/n...y/DSC_0189.jpg

engine :
+600 cv
turbo GT40R
injection programmable KMS

tank 20 litres
tampon 2 litres
2 fuel pump bosch/facet

transmission :
gearbox t5 sierra cosworth
clutch bi disques

interieur :
seat baquet

roll cage multipoint fia
numéric dash board AIM :arrow:

systèm camsport.com double cameras

other équipement:

4 airjack
1 radio com

blu808 · 05-31-2010, 06:04 PM

Why did you use a pic of the camaro for the front end?

Bebop · 05-31-2010, 06:28 PM

there's a shot of the Falken mustang rear end as well.

I think they are trying to show some compare and contrast

cossie78 · 06-01-2010, 09:20 AM

Yes is to show the idea which i have on the manufacturing of the car it are not of my car

cossie78 · 08-15-2010, 02:40 AM

interrior :

roof mould for carbon :
gelcoat:

fiber glass :

cossie78 · 08-15-2010, 08:43 AM

for my rollcage :

cossie78 · 08-19-2010, 05:18 AM

remove shaft with 5 nuts for 4 nuts

Reinforcement of the mould with the fixed wood has the resin then the dismantling of the roof
To remove 9.9kilos and the roof in carbon it is 2.5 kilos max

my new nuts

cossie78 · 09-10-2010, 03:41 AM

work in progress

cossie78 · 09-13-2010, 05:00 AM

Jonnie Fraz · 09-19-2010, 11:13 AM

[quote=cossie78;240253]

rear same of that

LOL...I did this work. Supra rear end into an 86.

Quote:

Originally Posted by blu808

Why did you use a pic of the camaro for the front end?

I think they are showing off our work in that this is what they want to do to their car. I think it's great.
Good work guys...looks like you have quite a project.

cossie78 · 09-21-2010, 10:45 AM

Today sanding has the water of moulds and polish
I hope that tomorrow I receive my carbon :wack:

cossie78 · 09-21-2010, 10:47 AM

[quote=Jonnie Fraz;242150]

Quote:

Originally Posted by cossie78

LOL...I did this work. Supra rear end into an 86.

I think they are showing off our work in that this is what they want to do to their car. I think it's great.
Good work guys...looks like you have quite a project.

thank you

cossie78 · 09-30-2010, 01:54 PM

cossie78 · 10-02-2010, 10:51 AM

roof

side

cossie78 · 01-10-2011, 11:24 AM

Justin Banner · 01-10-2011, 05:51 PM

Looks awesome, and makes me more jealous that you guys got that version of the Escort.

05-31-2010, 10:08 AM	#1
cossie78 Registered User Join Date: Mar 2009 Posts: 53	new turbotechnique drift project ford escort wrc base : we take wrc type but with formulaD spec car base ford escort 1.6 16v rebuild cosworth wrc : rear end mustang weigh transfer radiator,fuel tank,steering pump on rear axle front in aluminium pipe rear pipe light dashboard carbon wheels 18 rear par 10" wheels 17 front par 7.5/8" shell after work and powder paint i think the same front same of that rear same of that our website site du drift team turbotechnique

05-31-2010, 06:28 PM	#4
Bebop Registered User Join Date: Dec 2005 Location: 951 Posts: 2,420	there's a shot of the Falken mustang rear end as well. I think they are trying to show some compare and contrast __________________ Favorite Pro: USA - JTP JAP -Tetsuya Hibino Favorite Privateer: USA -John Russakoff JAP - Mitsuru Haruguchi Favorite Overall Team Bergenholtz Favorite Course: FD - LVMS(08 setup) D1 - Bihoku Circuit

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

05-31-2010, 10:09 AM	#2
cossie78 Registered User Join Date: Mar 2009 Posts: 53	shell : build carbon roof remove : -rear wings type cosworth gra -front wings wrc -carbon bonnet -doors carbone -window makrolon -wing carbon porsche gt3 suspension : coilover roll bar adjustable front : escort cosworth brake 330mm 6 pistons rear end : rear end mustang 1600mm 4 holes 4 links 4 calipers http://i303.photobucket.com/albums/n...y/DSC_0189.jpg engine : +600 cv turbo GT40R injection programmable KMS tank 20 litres tampon 2 litres 2 fuel pump bosch/facet transmission : gearbox t5 sierra cosworth clutch bi disques interieur : seat baquet roll cage multipoint fia numéric dash board AIM :arrow: systèm camsport.com double cameras other équipement: 4 airjack 1 radio com

05-31-2010, 06:04 PM	#3
blu808 Registered User Join Date: Sep 2009 Posts: 90	Why did you use a pic of the camaro for the front end?

06-01-2010, 09:20 AM	#5
cossie78 Registered User Join Date: Mar 2009 Posts: 53	Yes is to show the idea which i have on the manufacturing of the car it are not of my car

08-15-2010, 02:40 AM	#6
cossie78 Registered User Join Date: Mar 2009 Posts: 53	interrior : roof mould for carbon : gelcoat: fiber glass :

08-15-2010, 08:43 AM	#7
cossie78 Registered User Join Date: Mar 2009 Posts: 53	for my rollcage :

08-19-2010, 05:18 AM	#8
cossie78 Registered User Join Date: Mar 2009 Posts: 53	remove shaft with 5 nuts for 4 nuts Reinforcement of the mould with the fixed wood has the resin then the dismantling of the roof To remove 9.9kilos and the roof in carbon it is 2.5 kilos max my new nuts

09-10-2010, 03:41 AM	#9
cossie78 Registered User Join Date: Mar 2009 Posts: 53	work in progress

09-13-2010, 05:00 AM	#10
cossie78 Registered User Join Date: Mar 2009 Posts: 53

09-21-2010, 10:45 AM	#12
cossie78 Registered User Join Date: Mar 2009 Posts: 53	Today sanding has the water of moulds and polish I hope that tomorrow I receive my carbon :wack:

09-30-2010, 01:54 PM	#14
cossie78 Registered User Join Date: Mar 2009 Posts: 53

10-02-2010, 10:51 AM	#15
cossie78 Registered User Join Date: Mar 2009 Posts: 53	roof side

01-10-2011, 11:24 AM	#16
cossie78 Registered User Join Date: Mar 2009 Posts: 53

01-10-2011, 05:51 PM	#17
Justin Banner Registered User Join Date: Feb 2008 Location: Dinwiddie County (23803), VA Posts: 816	Looks awesome, and makes me more jealous that you guys got that version of the Escort.