Tweet
FS:Mazda RX7 performance parts, FB, FC, FD cheap!!!
Okay so I'm flexible on prices if you buy multiple items. Just don't low ball me. You know the routine. This is business. LOL.
I'm in the San Gabriel Valley. PM me if you like or Email.
brand new, unused FD fuel pumps(2 of them) got hese from autozone. $160 new, make an offer.
Walbro 255LPH in tank pump, the one all over ebay for $99. Also brand new in box. $80
S5 Alternators, 2 TurboII and one NA. $40 each.
RSR 2.5 inch Presilencer, heavy duty for Turbo cars. Was only used for 2 days when the car was wrecked. Made a huge difference for us when I put it on a straight piped TurboII. Still looks like new. it was $240 new. Measures 14"L x 5.5"W. Its round. Asking $100 OBO
Racing beat TurboII downpipe, 3 inch, we cut this one off at the rear flange cuz the bolts were seized up but it's still long, just the flange was cut. $60
Racing beat Front upper strut bar, the triangulated model that sells for $298 new. Asking $200
TurboII KYB GR-2 gas struts wih JDM TurboII springs, I have all four front and rear, only about 6K miles on them. To be honest, I don't know if the JDM springs are any different from the USDM. Asking $200
Brand new Tranny mount for 1981-85 RX7, got it new from the Dealer, sitll wrapped. $20
Weber 48MM IDA carb. Was on a 13b Streetport, shouldn't need rebuilding. Was in use up until Dec. 2006 Make an offer.
Stock 1984-85 12a nikki carbs, all taken from running cars over the past 2 years and keptin storage, shouldn't need rebuilding but can't gaurantee.
Only $20 each....3 units available.
custom made Mandrel bent, stainless steel Y-pipe for an FC. It will fit in place of the stock one with no mods needed. It's all bolt in just larger piping, 2.5 into dual 2.25. It cost me $240 almost 2 years ago. Still looks great. Asking only $80
Stock 1985 GSL-se wheels, all 4. Tires need replacing but hold air, wheels are in decnet shape, spray painted black. Make an offer. Local pick up only.
Stock TurboII top mount intercooler, perfect condition, straight cooling fins.
$40 OBO.
TurboII Fan and clutch, locks up tight, 32K miles on the clutch. Make an offer.
TurboII fan shrowd. $10
Brand new TurboII clutch set for 1987-91 TurboII. Bought new from autozone for $149 + tax, never installed. Pressure plate, clutch disc, alignment tool, and bearing. $80
Brand new Racing beat Sport/Strip HD Disc 1987-95 RX-7 TurboPart Number: 12508
Retail Price: $150.00 ASKING only $80.
Stock 1987 TurboII steering wheel. Good condition. Make an offer.
1993 Mazda RX7 Twin turbos complete with manifold. These have the classic hairline fractures around the opening on the flange side of the turbo but not as bad as other units I have had. I'll post some pix of these up so you can for yourself. They don't smoke, they were removed in Nov. 2006 for a single turbo upgrade. $$$ Taking offers $$$$
Shipping is available for the smaller items but nothing large like the Y-pipe.
I also have a super clean set of both driver and passenger side S4 TurboII mirrors. They are white, paint is in great shape.
And a passenger side fender from a 1988 TurboII, includes molding, perfect condition, white perfect paint. Must have been repainted.
Make an offer on these. The mirrors can be shipped. The fender, no chance.
I found 5 stock ignition coils from some of my past RX7's(all 1981-85). All are working, no rust or leaks.
$5 each. Shipping should be about $6 each.
Or a flat rate box(up to 30 lbs) with all of them in there would only be $10.
* TurboII Rear differential with axles $300
* 3 inch straight pipe exhuast with Polished straight through muffler with multi piece tip, burnt blue. No resonators. Cut where it should meet with the down pipe. Custom made from a muffler shop, it is not mandrel bent but there are no sharp angles or deep crushes to restrict flow. Gave us more power than the RB exhaust on top end 4.5K rpm and up. Should also work well on N/a cars. Asking $150
* Windows for an FC, passenger, and drivers door. $20 each
* Rear Hatch, good condition, Asking only $50
* TurboII FC front cross member complete with brakes and suspension. US spec, left over after removing from one of our cars getting the RHD conversion. Asking only $200 for it all. Perfect if you've hit a curb and bent some parts.
*TurboII front sway bar. $40
* complete S4 TurboII doors. Passenger and driver available. NO INTERIOR DOOR PANELS!!!
Only $75 each.
Discounts for those purchasing 2 items or more.
No shipping for over sized items.
I also have a complete door for a 1981-85 RX7, driver side.
It's from a 85 but will fir the other years. I sanded it down to the bare metal in autoshop a year ago and sprayed it with grey primer. No damage. Complete with window and all. $50
I'm in the San Gabriel Valley. PM me if you like or Email.
brand new, unused FD fuel pumps(2 of them) got hese from autozone. $160 new, make an offer.
Walbro 255LPH in tank pump, the one all over ebay for $99. Also brand new in box. $80
S5 Alternators, 2 TurboII and one NA. $40 each.
RSR 2.5 inch Presilencer, heavy duty for Turbo cars. Was only used for 2 days when the car was wrecked. Made a huge difference for us when I put it on a straight piped TurboII. Still looks like new. it was $240 new. Measures 14"L x 5.5"W. Its round. Asking $100 OBO
Racing beat TurboII downpipe, 3 inch, we cut this one off at the rear flange cuz the bolts were seized up but it's still long, just the flange was cut. $60
Racing beat Front upper strut bar, the triangulated model that sells for $298 new. Asking $200
TurboII KYB GR-2 gas struts wih JDM TurboII springs, I have all four front and rear, only about 6K miles on them. To be honest, I don't know if the JDM springs are any different from the USDM. Asking $200
Brand new Tranny mount for 1981-85 RX7, got it new from the Dealer, sitll wrapped. $20
Weber 48MM IDA carb. Was on a 13b Streetport, shouldn't need rebuilding. Was in use up until Dec. 2006 Make an offer.
Stock 1984-85 12a nikki carbs, all taken from running cars over the past 2 years and keptin storage, shouldn't need rebuilding but can't gaurantee.
Only $20 each....3 units available.
custom made Mandrel bent, stainless steel Y-pipe for an FC. It will fit in place of the stock one with no mods needed. It's all bolt in just larger piping, 2.5 into dual 2.25. It cost me $240 almost 2 years ago. Still looks great. Asking only $80
Stock 1985 GSL-se wheels, all 4. Tires need replacing but hold air, wheels are in decnet shape, spray painted black. Make an offer. Local pick up only.
Stock TurboII top mount intercooler, perfect condition, straight cooling fins.
$40 OBO.
TurboII Fan and clutch, locks up tight, 32K miles on the clutch. Make an offer.
TurboII fan shrowd. $10
Brand new TurboII clutch set for 1987-91 TurboII. Bought new from autozone for $149 + tax, never installed. Pressure plate, clutch disc, alignment tool, and bearing. $80
Brand new Racing beat Sport/Strip HD Disc 1987-95 RX-7 TurboPart Number: 12508
Retail Price: $150.00 ASKING only $80.
Stock 1987 TurboII steering wheel. Good condition. Make an offer.
1993 Mazda RX7 Twin turbos complete with manifold. These have the classic hairline fractures around the opening on the flange side of the turbo but not as bad as other units I have had. I'll post some pix of these up so you can for yourself. They don't smoke, they were removed in Nov. 2006 for a single turbo upgrade. $$$ Taking offers $$$$
Shipping is available for the smaller items but nothing large like the Y-pipe.
I also have a super clean set of both driver and passenger side S4 TurboII mirrors. They are white, paint is in great shape.
And a passenger side fender from a 1988 TurboII, includes molding, perfect condition, white perfect paint. Must have been repainted.
Make an offer on these. The mirrors can be shipped. The fender, no chance.
I found 5 stock ignition coils from some of my past RX7's(all 1981-85). All are working, no rust or leaks.
$5 each. Shipping should be about $6 each.
Or a flat rate box(up to 30 lbs) with all of them in there would only be $10.
* TurboII Rear differential with axles $300
* 3 inch straight pipe exhuast with Polished straight through muffler with multi piece tip, burnt blue. No resonators. Cut where it should meet with the down pipe. Custom made from a muffler shop, it is not mandrel bent but there are no sharp angles or deep crushes to restrict flow. Gave us more power than the RB exhaust on top end 4.5K rpm and up. Should also work well on N/a cars. Asking $150
* Windows for an FC, passenger, and drivers door. $20 each
* Rear Hatch, good condition, Asking only $50
* TurboII FC front cross member complete with brakes and suspension. US spec, left over after removing from one of our cars getting the RHD conversion. Asking only $200 for it all. Perfect if you've hit a curb and bent some parts.
*TurboII front sway bar. $40
* complete S4 TurboII doors. Passenger and driver available. NO INTERIOR DOOR PANELS!!!
Only $75 each.
Discounts for those purchasing 2 items or more.
No shipping for over sized items.
I also have a complete door for a 1981-85 RX7, driver side.
It's from a 85 but will fir the other years. I sanded it down to the bare metal in autoshop a year ago and sprayed it with grey primer. No damage. Complete with window and all. $50
Comment