My Project-XcessiveMotorsports.com- Drift Car!

Driftin180sx · 01-04-2005, 12:16 AM

Here is a pic of it on the ground with my buddys SE wheels! This is before the teardown started.

This i took tonight as i am getting it ready for paint and such. I have been doing alot of cleaning and you can see i have been seam welding some areas of the car! Also i relocated the fuse box on the drivers side it turned out awesome i think. Also as you can see on the right the harness is routed over the outer frame rail. I was tearing up the harness while i was drifting before i also removed the rail under the harness so i can dump my car and get full travel.

-Seam Welding-

This is cool HU__------!

Thought i would throw this in for fun. I will keep you guys updated.

pitchd · 01-04-2005, 02:23 AM

W T F

- adz

driftersil80 · 01-04-2005, 05:56 AM

WTF is that? Is that an RB26?

sdtouge · 01-04-2005, 07:17 AM

it looks like a ka24ett

wtf?

pitchd · 01-04-2005, 07:47 AM

Quote:

Originally posted by driftersil80
WTF is that? Is that an RB26?

obviously youve never seen an rb26 block before :P

unsure of what ka24de's look like but im assuming it is one - and im assuming theyre put there as a joke

- adz

p.s. i hope...

DriftEnthusiast · 01-04-2005, 11:14 AM

That is def a soch ka, look at the valve cover and intake manifold.

Driftin180sx · 01-04-2005, 01:58 PM

Yeah i was bored and i thought it looked cool!

C2 Powerhaus · 01-04-2005, 02:09 PM

wow?

ka24eTT?

pitchd · 01-04-2005, 02:29 PM

haha... so what is actually going in there? youve got the 5 stud swap... now its... sr time?

- adz

Driftin180sx · 01-04-2005, 02:51 PM

Ow yeah i did forget the motor pic, I am putting in a Blacktop S14 motor with VTC. I new i forgot something i will have to add the rest of the pics that i have.

driftersil80 · 01-04-2005, 03:39 PM

Well actually....my first thought was KA24ETT. But then I noticed that noone would be so stupid. So I figured it might be some weird form of RB26. But yes, I have seen many RB26 blocks....in real life.

bartosz14 · 01-04-2005, 09:26 PM

pitchd

obviously youve never seen an rb26 block before :P

unsure of what ka24de's look like but im assuming it is one - and im assuming theyre put there as a joke

- adz

p.s. i hope...

NO this is acctually a KA24E, the codes acctually stand for somthing....... there is a ka24de and ka24e ...... the d stands for double overhead cam.... and the one in the pic doesnt have it as u can see

Ps. hoped i teached you somtin

Spy001 · 01-04-2005, 10:12 PM

and i thought it was always Dual OverHead Cam

_PG_ · 01-04-2005, 11:32 PM

Its Dual not Double, not that it matters.

And you sure "learned" Adz good. HAHAHA what a stupid guy he is! He's facking dumb! You know why? He lives in Australia and their market was not fortunate enough to get KA's in S-chassis. Meaning... he is wondering why an SR isn't in the car stock.

Oh and why should he car about KA24Es anyways. He's got a HCR32 GTSt-4 Skyline and 18x11 -22 Veilside (SSR) wheels.

Uh.. commence the evil laughter.

Coiloverkid · 01-04-2005, 11:59 PM

Key words:

Quote:

Originally posted by _PG_
18x11 -22 Veilside (SSR) wheels.

"judge not a man by his intelligence, but by his offset."

_PG_ · 01-05-2005, 12:01 AM

Quote:

Originally posted by Coiloverkid
Key words:

"judge not a man by his intelligence, but by his offset."

Hahah yeah!

C2 Powerhaus · 01-05-2005, 12:02 AM

Quote:

Originally posted by Coiloverkid
Key words:

"judge not a man by his intelligence, but by his offset."

lol wow thats just...

Coiloverkid · 01-05-2005, 12:16 AM

Quote:

Originally posted by C2 Powerhaus
lol wow thats just...

profound isn't it?

C2 Powerhaus · 01-05-2005, 12:23 AM

Very much

pitchd · 01-05-2005, 01:02 AM

Quote:

Originally posted by _PG_
Hahah yeah!

there is no intelligance behind my 18x11's... their -22 offset and will stick about 120mm out of my guards - time to flare the fockers!

and btw inregards to the ka24e - didnt actually pay too much attention to the tool covered rocker cover - but after actually looking at it i can see it is a ka24e which runs a single overhead cam

- adz

Driftin180sx · 01-05-2005, 01:35 AM

I will have to post pics of the 1200Whp Supra which my car is covering all you can see is the chut!

Driftin180sx · 01-06-2005, 07:42 PM

Pics are comeing soon!

Driftin180sx · 01-08-2005, 02:51 PM

Here is xcessivemotorsports.com twin turbo supra that ran a 9.45 last year.

Driftin180sx · 01-14-2005, 10:53 PM

Well all the parts we have are now on the website! Click Here

01-04-2005, 12:16 AM	#1
Driftin180sx Controlled KAOS Join Date: Jul 2003 Location: Oregon Posts: 303	My Project-XcessiveMotorsports.com- Drift Car! Here is a pic of it on the ground with my buddys SE wheels! This is before the teardown started. This i took tonight as i am getting it ready for paint and such. I have been doing alot of cleaning and you can see i have been seam welding some areas of the car! Also i relocated the fuse box on the drivers side it turned out awesome i think. Also as you can see on the right the harness is routed over the outer frame rail. I was tearing up the harness while i was drifting before i also removed the rail under the harness so i can dump my car and get full travel. -Seam Welding- This is cool HU__------! Thought i would throw this in for fun. I will keep you guys updated.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

01-04-2005, 02:23 AM	#2
pitchd Registered User Join Date: Jan 2005 Location: Adelaide, Australia Posts: 43	W T F - adz

01-04-2005, 05:56 AM	#3
driftersil80 GT3/KB2 Drift Master Join Date: Feb 2004 Location: Phoenix, AZ Posts: 836	WTF is that? Is that an RB26?

01-04-2005, 07:17 AM	#4
sdtouge Registered User Join Date: Jul 2004 Location: san diego Posts: 868	it looks like a ka24ett wtf?

01-04-2005, 11:14 AM	#6
DriftEnthusiast User Join Date: Jun 2004 Posts: 36	That is def a soch ka, look at the valve cover and intake manifold.

01-04-2005, 01:58 PM	#7
Driftin180sx Controlled KAOS Join Date: Jul 2003 Location: Oregon Posts: 303	Yeah i was bored and i thought it looked cool!

01-04-2005, 02:09 PM	#8
C2 Powerhaus Performance Shop Join Date: Dec 2004 Location: Sun Valley, CA 818 Posts: 149	wow? ka24eTT?

01-04-2005, 02:29 PM	#9
pitchd Registered User Join Date: Jan 2005 Location: Adelaide, Australia Posts: 43	haha... so what is actually going in there? youve got the 5 stud swap... now its... sr time? - adz

01-04-2005, 02:51 PM	#10
Driftin180sx Controlled KAOS Join Date: Jul 2003 Location: Oregon Posts: 303	Ow yeah i did forget the motor pic, I am putting in a Blacktop S14 motor with VTC. I new i forgot something i will have to add the rest of the pics that i have.

01-04-2005, 03:39 PM	#11
driftersil80 GT3/KB2 Drift Master Join Date: Feb 2004 Location: Phoenix, AZ Posts: 836	Well actually....my first thought was KA24ETT. But then I noticed that noone would be so stupid. So I figured it might be some weird form of RB26. But yes, I have seen many RB26 blocks....in real life.

01-04-2005, 09:26 PM	#12
bartosz14 User Join Date: Dec 2004 Location: Toronto ONT Posts: 9	pitchd obviously youve never seen an rb26 block before :P unsure of what ka24de's look like but im assuming it is one - and im assuming theyre put there as a joke - adz p.s. i hope... NO this is acctually a KA24E, the codes acctually stand for somthing....... there is a ka24de and ka24e ...... the d stands for double overhead cam.... and the one in the pic doesnt have it as u can see Ps. hoped i teached you somtin

01-04-2005, 10:12 PM	#13
Spy001 Registered User Join Date: May 2004 Location: Portland, OR Posts: 412	and i thought it was always Dual OverHead Cam

01-04-2005, 11:32 PM	#14
_PG_ Got a date with Lady Luck Join Date: Aug 2004 Location: The sucky CA Posts: 427	Its Dual not Double, not that it matters. And you sure "learned" Adz good. HAHAHA what a stupid guy he is! He's facking dumb! You know why? He lives in Australia and their market was not fortunate enough to get KA's in S-chassis. Meaning... he is wondering why an SR isn't in the car stock. Oh and why should he car about KA24Es anyways. He's got a HCR32 GTSt-4 Skyline and 18x11 -22 Veilside (SSR) wheels. Uh.. commence the evil laughter.

01-05-2005, 12:23 AM	#19
C2 Powerhaus Performance Shop Join Date: Dec 2004 Location: Sun Valley, CA 818 Posts: 149	Very much

01-05-2005, 01:35 AM	#21
Driftin180sx Controlled KAOS Join Date: Jul 2003 Location: Oregon Posts: 303	I will have to post pics of the 1200Whp Supra which my car is covering all you can see is the chut!

01-06-2005, 07:42 PM	#22
Driftin180sx Controlled KAOS Join Date: Jul 2003 Location: Oregon Posts: 303	Pics are comeing soon!

01-08-2005, 02:51 PM	#23
Driftin180sx Controlled KAOS Join Date: Jul 2003 Location: Oregon Posts: 303	Here is xcessivemotorsports.com twin turbo supra that ran a 9.45 last year.

01-14-2005, 10:53 PM	#24
Driftin180sx Controlled KAOS Join Date: Jul 2003 Location: Oregon Posts: 303	Well all the parts we have are now on the website! Click Here