E&E MOTORSPORTS 200R

04-11-2005, 06:29 PM

Hey whats up guys we just got done recently with one of our Shop Cars. It belongs to Jeremy. This car is amazing. Its a 92 s13 with a rb20det. It has a t3/t4 setup with 450cc injectors. Safc2 and hks cams. HCR-32 front end and volk gt-u wheels. Also has a r-32 diff and custom 3 inch exhaust We are planning a full rebuild and a wide body on this beast. Dyno sheets will be posted asap.

A full built 5.0 mustang its a beast but no mach for the rb.

Hope you guys like it. If you are interested in something like this give us a call at the shop 678-770-4516.

Zillion_03 · 04-11-2005, 06:39 PM

how about some motor shots? not to imply anyhting but some id like to see that sweet motor.

2-Tone-Drift · 04-12-2005, 05:34 PM

oh man thats car is sweeeeeeeeet f it were sil eighty i would cream my self so badly but i love what you did ..putting that RB man thats massive!

gogg · 04-12-2005, 06:37 PM

Sky-eighty

sdtouge · 04-12-2005, 07:41 PM

damn that car looks good.

we do have 2/3rds of any rb though

lol

PurePerformance · 04-12-2005, 07:57 PM

im really feelin that, somethin unique

nxt774 · 04-12-2005, 08:29 PM

not trying to russel anyones feathers but that dosent look all that clean to me. the front end is not lined up at all if you look in the 4th pic you can see it. and in the second to last pic you can see how off they really are. nice looking car from the front but it still needs a little work. good luck with it

rb20 · 04-13-2005, 01:55 AM

not trying to russel YOUR feathers but what do you drive thats so impressive that and that doesnt need any work whatso ever that you can go and critisize someone elses hard work.

racer555 · 04-13-2005, 04:46 PM

Actually I agree with nxt774. The front end would look alot better with the lines for the molding matched between the fender and the door. With the difference in body lines it really doesnt look natural from the side. But as is it still kicks @@@, It just could be a little better. But then again my car could be a little better too so who am I to talk. Nice job guys and keep up the good work.

P.S. post some engine pics plz, I love RB's!!!!!

NismoSigma · 04-13-2005, 07:40 PM

Er yea, its ( im just spitballin from the pics) a R32 front end. Its not a sil-eighty, its a R32 front end with the RB20. Its ok I guess, I mean it is something diffrent but if you get the whole body lined up, it will look better at the expense of more weight. Well good job for trying something diffrent!

bk3896 · 04-13-2005, 08:23 PM

...ditto...

Piner · 04-14-2005, 05:34 AM

Thats awesome dude somebody doing something differnet. I love the way it turned

nah all thats just metal work. Not that hard to do if you know what your doing.

akuma S14 · 04-14-2005, 12:29 PM

Quote:

Originally Posted by Piner

Thats awesome dude somebody doing something differnet. I love the way it turned

nah all thats just metal work. Not that hard to do if you know what your doing.

DIFFERENT? looks like they read drift tengoku and saw a picture. Not really ground breaking.

DIFFERENT IS SHOWING THAT THEY CAN ACTUALLY DRIFT!

All the headlight swaps in the world don't add up to talent or skill.

NismoSigma · 04-14-2005, 05:19 PM

Can someone with knowledge on R32 front clips (or anyone with relative knowledge) please affirm what I said. Thanks.

nxt774 · 04-14-2005, 09:10 PM

no need to be an a$$ but for your info i have a 95 s14.5 full carbon fiber front end kazz 2 way sr20 kei office D1 spec coil overs full bolt ons, greddy cams & cam sprockets, custom v-mount intercooler version select sides and rear, msports 50mm wide rear fenders full defi bf gauges and a few other things. if you would actually like a complete write up i will post up the link to the site in which it will be on.
thank you and have a wonderful day

P.S. i was'nt talking bad about your car dude all i was saying is finish it up there a few people that have done that conversion and it looks flawless i think its a beautiful conversion and a very unique one since not to many people state side do it.

josh

pez2k · 04-15-2005, 06:03 PM

Not the cleanest Sky-etty ever, but it definitely looks better than the ones with BNR32 front ends, and it's a lot more inventive than the same ol' Sileighties. Good job on the swap too, the RB20 doesn't get half the loving it should.

driftersil80 · 04-15-2005, 06:20 PM

That is an R32 front-end.

04-11-2005, 06:29 PM	#1
turbo_blitz21 Guest Posts: n/a	E&E MOTORSPORTS 200R Hey whats up guys we just got done recently with one of our Shop Cars. It belongs to Jeremy. This car is amazing. Its a 92 s13 with a rb20det. It has a t3/t4 setup with 450cc injectors. Safc2 and hks cams. HCR-32 front end and volk gt-u wheels. Also has a r-32 diff and custom 3 inch exhaust We are planning a full rebuild and a wide body on this beast. Dyno sheets will be posted asap. A full built 5.0 mustang its a beast but no mach for the rb. Hope you guys like it. If you are interested in something like this give us a call at the shop 678-770-4516.

04-11-2005, 06:39 PM	#2
Zillion_03 User Join Date: Mar 2005 Posts: 1	more picts how about some motor shots? not to imply anyhting but some id like to see that sweet motor.

04-12-2005, 05:34 PM	#3
2-Tone-Drift Guest Join Date: Feb 2005 Posts: 17	? oh man thats car is sweeeeeeeeet f it were sil eighty i would cream my self so badly but i love what you did ..putting that RB man thats massive!

04-13-2005, 01:55 AM	#8
rb20 Registered User Join Date: Nov 2004 Posts: 100	not trying to russel YOUR feathers but what do you drive thats so impressive that and that doesnt need any work whatso ever that you can go and critisize someone elses hard work. Last edited by rb20; 04-13-2005 at 02:00 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

04-12-2005, 06:37 PM	#4
gogg Registered User Join Date: Sep 2004 Location: Lafayette, La Posts: 86	Sky-eighty

04-12-2005, 07:41 PM	#5
sdtouge Registered User Join Date: Jul 2004 Location: san diego Posts: 868	damn that car looks good. we do have 2/3rds of any rb though lol

04-12-2005, 07:57 PM	#6
PurePerformance Registered User Join Date: Mar 2004 Location: Roseville, Ca Posts: 221	im really feelin that, somethin unique

04-12-2005, 08:29 PM	#7
nxt774 Registered User Join Date: Aug 2004 Posts: 54	not trying to russel anyones feathers but that dosent look all that clean to me. the front end is not lined up at all if you look in the 4th pic you can see it. and in the second to last pic you can see how off they really are. nice looking car from the front but it still needs a little work. good luck with it

04-13-2005, 04:46 PM	#9
racer555 Registered User Join Date: Dec 2004 Location: Las Vegas, NV Posts: 60	Actually I agree with nxt774. The front end would look alot better with the lines for the molding matched between the fender and the door. With the difference in body lines it really doesnt look natural from the side. But as is it still kicks @@@, It just could be a little better. But then again my car could be a little better too so who am I to talk. Nice job guys and keep up the good work. P.S. post some engine pics plz, I love RB's!!!!!

04-13-2005, 07:40 PM	#10
NismoSigma Driftin' to the MOON! Join Date: Jul 2004 Location: NJ Posts: 675	Er yea, its ( im just spitballin from the pics) a R32 front end. Its not a sil-eighty, its a R32 front end with the RB20. Its ok I guess, I mean it is something diffrent but if you get the whole body lined up, it will look better at the expense of more weight. Well good job for trying something diffrent!

04-13-2005, 08:23 PM	#11
bk3896 Registered User Join Date: Dec 2004 Posts: 57	...ditto...

04-14-2005, 05:34 AM	#12
Piner Registered User Join Date: Jun 2004 Location: Ramstein AB, Germany Posts: 776	Thats awesome dude somebody doing something differnet. I love the way it turned nah all thats just metal work. Not that hard to do if you know what your doing.

04-14-2005, 05:19 PM	#14
NismoSigma Driftin' to the MOON! Join Date: Jul 2004 Location: NJ Posts: 675	Can someone with knowledge on R32 front clips (or anyone with relative knowledge) please affirm what I said. Thanks.

04-14-2005, 09:10 PM	#15
nxt774 Registered User Join Date: Aug 2004 Posts: 54	no need to be an a$$ but for your info i have a 95 s14.5 full carbon fiber front end kazz 2 way sr20 kei office D1 spec coil overs full bolt ons, greddy cams & cam sprockets, custom v-mount intercooler version select sides and rear, msports 50mm wide rear fenders full defi bf gauges and a few other things. if you would actually like a complete write up i will post up the link to the site in which it will be on. thank you and have a wonderful day P.S. i was'nt talking bad about your car dude all i was saying is finish it up there a few people that have done that conversion and it looks flawless i think its a beautiful conversion and a very unique one since not to many people state side do it. josh

04-15-2005, 06:03 PM	#16
pez2k Registered User Join Date: Dec 2004 Location: UK Posts: 59	Not the cleanest Sky-etty ever, but it definitely looks better than the ones with BNR32 front ends, and it's a lot more inventive than the same ol' Sileighties. Good job on the swap too, the RB20 doesn't get half the loving it should.

04-15-2005, 06:20 PM	#17
driftersil80 GT3/KB2 Drift Master Join Date: Feb 2004 Location: Phoenix, AZ Posts: 836	That is an R32 front-end.