 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|
|||||||
This is a discussion on Finally finished my cage... within the Pictures and Video Clips forums, part of the General Forum category; Yea, the camera is a beastly 1.3mp....
 |
|
|
Thread Tools | Rate Thread | Display Modes |
04-12-2006, 01:57 PM
|
#1 |
|
Guest
Posts: n/a
|
Finally finished my cage...
Yea, the camera is a beastly 1.3mp.
  
|
|
|
04-13-2006, 09:05 AM
|
#2 |
|
Registered User
Join Date: Aug 2005
Location: Kent, Ohio
Posts: 78
 |
wow, thats a masterpiece, i wish i had the extra scratch to put the rigidity bars in there!!!
|
|
|
|
04-13-2006, 12:13 PM
|
#3 |
|
Guest
Posts: n/a
|
Thanks =D And I used DOM for the cage so it wasn't too costly actually. And right now it's pretty stiff haha.
|
|
|
|
04-17-2006, 11:25 PM
|
#4 |
|
Registered User
Join Date: Feb 2006
Posts: 39
|
Hey I cant seem to find the name of the metal that is between the bars and the A Pillar area. The stuff that has the hole punched out of it. Thanks for any info that you have.
Aaron |
|
|
|
|
04-18-2006, 11:52 AM
|
#5 |
|
Registered User
Join Date: Sep 2004
Location: norcal modesto
Posts: 125
|
Its called "dimple die plate" its just flat sheet metal that has been punched through and the dimpled with a die and a press, call a fabrication shop to have them make it unless you have a press, a round die ( looks like a ball ping on a hammer) and a grinder or air die grinder.
Matt |
|
|
|
|
04-18-2006, 10:00 PM
|
#6 |
|
Guest
Posts: n/a
|
Yea I made a die for it on the press. It's not as deep as I wanted, and I just used thin sheet metal. Going back, I would have used thicker sheet metal. And the same die I used would have went deeper with a ticker metal.
|
|
|
|
04-19-2006, 02:33 PM
|
#7 |
|
Registered User
Join Date: Feb 2006
Posts: 39
|
Any place online that you know of that I can get more info on this? If not thats ok too. Thanks.
Aaron |
|
|
|
|
04-20-2006, 12:51 AM
|
#8 |
|
Guest
Posts: n/a
|
No, sorry I don't know of anything off-hand.
|
|
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
