Battle Scars!

prodigy · 12-01-2003, 08:04 PM

I want to see pics of your guys' battle scars from drift or just accidents that happened to your babies. This was my 91 Celica GT, not a drifter but I did pull off some nice powerslides in this car. I am posting pics from three different accidents. The Celica all torn apart.

prodigy · 12-01-2003, 08:08 PM

The first one and the next three are from my first accident in the car. I was turning left going to work and didn't see a guy, he hit me. He also had no insurance so he shouldn't of even been on the road. Crushed passenger fender.

prodigy · 12-01-2003, 08:11 PM

The replacement fender.

prodigy · 12-01-2003, 08:13 PM

No really big mechanical damage to the car during this accident. Just bent a strut.

prodigy · 12-01-2003, 08:17 PM

I pinned my old Celica between two trees doing a powerslide. I hit the snow on the outside, then stuck in the center of the road where there wasn't any snow, and hit the snow on the other side of the road and roled down the ditch. Had a water deliver guy pull me out. My passenger side fender and the bumper were each wrapped around the tree. I had to push the bumper in with a stick so he didn't rip it off when he pulled me out. After the first accident I painted it all with gray primer. Yes that is the replacement fender from the first accident. Luckily it just took a little plastic filler and primer to fix it.

prodigy · 12-01-2003, 08:18 PM

When my step dad was drunk he said he could see a face in the fender. I guess you can kind of see one. Haha. It is the face of the dori god.

prodigy · 12-01-2003, 08:23 PM

My last accident happened in the rain right before I sold the car. The same buyer actually bought it that was going to before I wrecked it. Well, a guy slide into me in the rain when I was turning left at a light. The light turned green and he wasn't moving so I went, then he decided to go and he slide into me. I had my friend cut out the section and I hammered it back out. After putting some holes in it with my body hammer because I was pissed because I didn't think anyone would buy it. I took a off a grand and let it go. The section was already hit so it just crushed easily, it was a very low speed wreck.

prodigy · 12-01-2003, 08:25 PM

Last one. The guy actually fixed it and painted it dark blue. He got the color idea from me. Sorry about the pictures enlarging the screen. I better see some of your guys' battle scars.

z33Drifter · 12-01-2003, 10:10 PM

wow lotta damage i havent had any yet hopefully not anytime soon

driftaholic · 12-02-2003, 05:32 PM

lol if you havvent had any damage... youre not doing it right...lmao

panda_3ight_6 · 12-02-2003, 06:08 PM

mine came pre messed up ... needs some body work... theres rust on the doors and rear quaterpanels.. thats nothing to me though... 3 hours of grinding at the most... but one the tail lights are broke so i gonna go for the JDM ones to save time & money.. but that might take a little more for the installation...

prodigy · 12-02-2003, 06:16 PM

Yeah that car was just fixed and painted when I got it. My 240sx is going to need a patch on one of the spots that it has rust and some All Metal on another.

gladhatter · 12-03-2003, 02:32 AM

here ya go

gladhatter · 12-03-2003, 02:38 AM

here ya go

pcbootleger · 12-03-2003, 02:39 AM

too much stress on wheel lug nuts from drifting. took a turn too fast and wheel came off and hit front panel before going into the bushes. I literally cried for the first time in at least 5 years. Costed me 50 bucks and one week to repair the damages (its nice to have connections)

pcbootleger · 12-03-2003, 02:39 AM

2

pcbootleger · 12-03-2003, 02:40 AM

As you can see it was being held together by just one lug nut right The rest were stripped COMPLETLY clean! The one thats holding it in was only able to go in like 1/4 the way. I was lucky I was able to get at least one one so it could be towed. Most of the damage was to the rotors and lug nuts. No visible damage anywhere else. I was shocked at that. Even had two mechanics verify the damage. I was very lucky.

prodigy · 12-03-2003, 07:51 PM

Ouch that would be scary. My friend was doing seventy on the highway and his wheel came off, talk about scary.

gladhatter · 12-03-2003, 09:33 PM

With that much stress on the front in a drift you must be pushing pretty bad in the turns instead of kicking out the rear end.

ACDSupra7 · 12-03-2003, 11:15 PM

Quote:

Originally posted by driftaholic
lol if you havvent had any damage... youre not doing it right...lmao

Amen.

pcbootleger · 12-04-2003, 04:27 AM

Quote:

Originally posted by gladhatter
With that much stress on the front in a drift you must be pushing pretty bad in the turns instead of kicking out the rear end.

too much understeer I guess. You have no idea how hard it is to whip out the rear end of my car. its low powered and heavy.

kumakun · 12-04-2003, 06:27 AM

Some old damage I did when I first started drifting....oversteering into a wall

Some recent damage. Actually this happened after I threw tread drifting

KristianAE86 · 12-04-2003, 07:00 AM

i have bent a steering rod (if that´s what they are called).. & cracked two of my BBS replica 15" rims & blown one almost new 195/45-15 Kumho tire.. I ran over a coke/beer can & the tire blew

Kristian -Sweden

KristianAE86 · 12-04-2003, 07:12 AM

i have bent a steering rod (if that´s what they are called).. & cracked two of my BBS replica 15" rims & blown one almost new 195/45-15 Kumho tire.. I ran over a coke/beer can & the tire blew

Kristian -Sweden

PrOxLaMuS© S30 · 12-04-2003, 05:09 PM

Here's a picture of my scar's drifting...
my EX girlfriend crashed into me.. because she was mad at me.... "i shouldnt be drifting" *Censored**Censored**Censored**Censored* that

Before

After!

12-01-2003, 08:04 PM	#1
prodigy Broken 240sx Join Date: Aug 2003 Location: Saginaw, Michigan Posts: 695	Battle Scars! I want to see pics of your guys' battle scars from drift or just accidents that happened to your babies. This was my 91 Celica GT, not a drifter but I did pull off some nice powerslides in this car. I am posting pics from three different accidents. The Celica all torn apart. Attached Images Last edited by prodigy; 12-01-2003 at 08:09 PM.

12-01-2003, 08:08 PM	#2
prodigy Broken 240sx Join Date: Aug 2003 Location: Saginaw, Michigan Posts: 695	The first one and the next three are from my first accident in the car. I was turning left going to work and didn't see a guy, he hit me. He also had no insurance so he shouldn't of even been on the road. Crushed passenger fender. Attached Images Last edited by prodigy; 12-01-2003 at 08:10 PM.

12-01-2003, 08:11 PM	#3
prodigy Broken 240sx Join Date: Aug 2003 Location: Saginaw, Michigan Posts: 695	The replacement fender. Attached Images

12-01-2003, 08:13 PM	#4
prodigy Broken 240sx Join Date: Aug 2003 Location: Saginaw, Michigan Posts: 695	No really big mechanical damage to the car during this accident. Just bent a strut. Attached Images

12-01-2003, 08:17 PM	#5
prodigy Broken 240sx Join Date: Aug 2003 Location: Saginaw, Michigan Posts: 695	I pinned my old Celica between two trees doing a powerslide. I hit the snow on the outside, then stuck in the center of the road where there wasn't any snow, and hit the snow on the other side of the road and roled down the ditch. Had a water deliver guy pull me out. My passenger side fender and the bumper were each wrapped around the tree. I had to push the bumper in with a stick so he didn't rip it off when he pulled me out. After the first accident I painted it all with gray primer. Yes that is the replacement fender from the first accident. Luckily it just took a little plastic filler and primer to fix it. Attached Images

12-01-2003, 08:18 PM	#6
prodigy Broken 240sx Join Date: Aug 2003 Location: Saginaw, Michigan Posts: 695	When my step dad was drunk he said he could see a face in the fender. I guess you can kind of see one. Haha. It is the face of the dori god. Attached Images

12-01-2003, 08:23 PM	#7
prodigy Broken 240sx Join Date: Aug 2003 Location: Saginaw, Michigan Posts: 695	My last accident happened in the rain right before I sold the car. The same buyer actually bought it that was going to before I wrecked it. Well, a guy slide into me in the rain when I was turning left at a light. The light turned green and he wasn't moving so I went, then he decided to go and he slide into me. I had my friend cut out the section and I hammered it back out. After putting some holes in it with my body hammer because I was pissed because I didn't think anyone would buy it. I took a off a grand and let it go. The section was already hit so it just crushed easily, it was a very low speed wreck. Attached Images

12-01-2003, 08:25 PM	#8
prodigy Broken 240sx Join Date: Aug 2003 Location: Saginaw, Michigan Posts: 695	Last one. The guy actually fixed it and painted it dark blue. He got the color idea from me. Sorry about the pictures enlarging the screen. I better see some of your guys' battle scars. Attached Images

12-01-2003, 10:10 PM	#9
z33Drifter Newbie Join Date: Nov 2003 Location: Cali Bay Area Posts: 78	wow lotta damage i havent had any yet hopefully not anytime soon __________________ http://www.50mb.net/~hiroko/drift/z33top.GIF http://www.50mb.net/~hiroko/drift/hcr32-d1.GIF http://www.50mb.net/~hiroko/drift/z33nismo.GIF http://www.50mb.net/~hiroko/drift/r32-gtr4.GIF http://www.50mb.net/~hiroko/drift/s15-kazama.GIF http://www.50mb.net/~hiroko/drift/s14-g3.GIF

12-02-2003, 05:32 PM	#10
driftaholic Junior Member Join Date: Nov 2003 Posts: 182	re: lol if you havvent had any damage... youre not doing it right...lmao

12-02-2003, 06:08 PM	#11
panda_3ight_6 Senior Member Join Date: Nov 2003 Posts: 612	mine came pre messed up ... needs some body work... theres rust on the doors and rear quaterpanels.. thats nothing to me though... 3 hours of grinding at the most... but one the tail lights are broke so i gonna go for the JDM ones to save time & money.. but that might take a little more for the installation...

12-02-2003, 06:16 PM	#12
prodigy Broken 240sx Join Date: Aug 2003 Location: Saginaw, Michigan Posts: 695	Yeah that car was just fixed and painted when I got it. My 240sx is going to need a patch on one of the spots that it has rust and some All Metal on another.

12-03-2003, 02:32 AM	#13
gladhatter Hung! Join Date: Dec 2003 Location: Ohbatake, Japan Posts: 71	here ya go Attached Images

12-03-2003, 02:38 AM	#14
gladhatter Hung! Join Date: Dec 2003 Location: Ohbatake, Japan Posts: 71	here ya go Attached Images

12-03-2003, 02:39 AM	#15
pcbootleger I'm Half Japanese!! Join Date: Jul 2003 Location: Orlando, Fl Posts: 132	too much stress on wheel lug nuts from drifting. took a turn too fast and wheel came off and hit front panel before going into the bushes. I literally cried for the first time in at least 5 years. Costed me 50 bucks and one week to repair the damages (its nice to have connections) Attached Images __________________ rare Z31 drifter. catch me if you can! http://www.drifting.com/forums/attac...=&postid=24058 do image tags not work???

12-03-2003, 02:39 AM	#16
pcbootleger I'm Half Japanese!! Join Date: Jul 2003 Location: Orlando, Fl Posts: 132	2 Attached Images __________________ rare Z31 drifter. catch me if you can! http://www.drifting.com/forums/attac...=&postid=24058 do image tags not work???

12-03-2003, 02:40 AM	#17
pcbootleger I'm Half Japanese!! Join Date: Jul 2003 Location: Orlando, Fl Posts: 132	As you can see it was being held together by just one lug nut right The rest were stripped COMPLETLY clean! The one thats holding it in was only able to go in like 1/4 the way. I was lucky I was able to get at least one one so it could be towed. Most of the damage was to the rotors and lug nuts. No visible damage anywhere else. I was shocked at that. Even had two mechanics verify the damage. I was very lucky. Attached Images __________________ rare Z31 drifter. catch me if you can! http://www.drifting.com/forums/attac...=&postid=24058 do image tags not work??? Last edited by pcbootleger; 12-03-2003 at 02:48 AM.

12-03-2003, 07:51 PM	#18
prodigy Broken 240sx Join Date: Aug 2003 Location: Saginaw, Michigan Posts: 695	Ouch that would be scary. My friend was doing seventy on the highway and his wheel came off, talk about scary.

12-03-2003, 09:33 PM	#19
gladhatter Hung! Join Date: Dec 2003 Location: Ohbatake, Japan Posts: 71	With that much stress on the front in a drift you must be pushing pretty bad in the turns instead of kicking out the rear end.

12-04-2003, 06:27 AM	#22
kumakun Newbie Join Date: Aug 2003 Location: Misawa city, Japan Posts: 29	Some old damage I did when I first started drifting....oversteering into a wall Some recent damage. Actually this happened after I threw tread drifting

12-04-2003, 07:00 AM	#23
KristianAE86 Registered User Join Date: Jul 2003 Location: at the racetrack Posts: 374	my damages i have bent a steering rod (if that´s what they are called).. & cracked two of my BBS replica 15" rims & blown one almost new 195/45-15 Kumho tire.. I ran over a coke/beer can & the tire blew Kristian -Sweden __________________ Mitsubishi EVO 2 1994 RWD Driftmachine 900kgs, 500+bhp, 12-point cage, 18"´s WYNN´S, BILTEMA.se, RALLYSHOP.se

12-04-2003, 07:12 AM	#24
KristianAE86 Registered User Join Date: Jul 2003 Location: at the racetrack Posts: 374	my damages i have bent a steering rod (if that´s what they are called).. & cracked two of my BBS replica 15" rims & blown one almost new 195/45-15 Kumho tire.. I ran over a coke/beer can & the tire blew Kristian -Sweden __________________ Mitsubishi EVO 2 1994 RWD Driftmachine 900kgs, 500+bhp, 12-point cage, 18"´s WYNN´S, BILTEMA.se, RALLYSHOP.se

12-04-2003, 05:09 PM	#25
PrOxLaMuS© S30 Z Car Freak (S30) Join Date: Dec 2003 Location: Colorado Posts: 208	Here's a picture of my scar's drifting... my EX girlfriend crashed into me.. because she was mad at me.... "i shouldnt be drifting" CensoredCensoredCensoredCensored that Before After! __________________ 1978 280Z Boring Mods : Turbocharged N/A engine with MSnS extra Watercooled T3 turbo from a Z31 Large NPR intercooler 440cc injectors 3" stainless steel downpipe N42 intake manifold www.cardomain.com/id/pr0xlamus

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: