ad

Announcement

Collapse
No announcement yet.

Rev Limiter in Drifting

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    makes sense to me....if you have a 7000 redline, then try and stay at 4500 -5000....then you can either let off or give more....

    Comment


    • #17
      kinda depends where your motor makes the most power. like rotaries, high revving like crazy. my KA is mostly from 4500 to 6500k. i try not to touch the 7k. but once in a while i hit it.

      Comment


      • #18
        is your ka from a SE, or a standard model? the KA in my SE would get power until 7k, and i even took it higher, but i also have a Jim Wolf Technologies ECU on it.....i only took it above 7 once....and it actually got power until like 7400 rpm....which was crazy.

        Comment


        • #19
          ka makes its peak power at 4.5 if im not mistaken.

          i have a rom tune in it from www.secretservicesinc.com

          and it stil makes the most power at 4.5, but it makes like 20 more then waht it used to there, and the power it made at 4.5 it now makes at redline. ka's dont need to rev more then like 6,8 unless u have built internals

          Comment


          • #20
            stock rev limiter cuts fuel
            beer rev lim cuts ignition


            why would you want to remove stock one?!?!?!!!!!

            I cant believe my ears

            Comment


            • #21
              stock rev limiter has its purpose, why would you remove it?

              Comment


              • #22
                because with stiffer valvesprings, rocker arm stopper if appliccable, and cams, there is more powerband to be opened.

                Comment


                • #23
                  Originally posted by mranlet
                  If you've hit the limiter...it's time to shift.

                  -MR
                  I thought it would be rude to repeat myself

                  -MR

                  Comment


                  • #24
                    Originally posted by balmo
                    stock rev limiter has its purpose, why would you remove it?
                    because fuel cut causes lean condition, very bad for your motor. and what they said...

                    Comment


                    • #25
                      Originally posted by funk
                      ka makes its peak power at 4.5 if im not mistaken.

                      i have a rom tune in it from www.secretservicesinc.com

                      and it stil makes the most power at 4.5, but it makes like 20 more then waht it used to there, and the power it made at 4.5 it now makes at redline. ka's dont need to rev more then like 6,8 unless u have built internals
                      5.5. the power band flattens out after that.

                      Comment

                      Working...
                      X