c33 Laurel Auto to Manaul problem

[wo0dsey]

I have a c33 Laurel that i just put an rb25det into and the engine mounted up fine but the gearbox mounts were 52mm out (needing to move the mounts back to the diff 52mm to bolt up).

The c33 laurel iv got used to be an auto any help please

[Bebop]

You might need to use a R32 trans if the motor is out of a R33 or a R34(especially) it might not mount up.

What country are you in

Most of us are Americans so we are kinda stupid when it comes to this.

[QuickStyle]

when i did mine i had a bracket welded on to the tranny mount...
it was a 26, but same thing

[wo0dsey]

Im from new zealand mate. i was just going to weld some mount brackets up for the gearbox but is a rb25det gearbox from an r33 diffrent from the orignal manual c33 laurel gearbox thanks heaps guys

[QuickStyle]

i used a 32 type m tranny and just fabricated a bracket to move the holes on the mount over a couple inches...