post your current setup

[driftallcorners]

i just wanna see what everybody here is running: mods, suspension, etc.

i'll start...
'88 n/a FC
cone filter
no mufflers (took them off to replace gaskets, i haven't gotten around to replacing them.
16" BBS 2-piece rims
shot rear struts (super body-roll and bouncy a$$ rear end)

i need a better job, i can't afford any suspension mods. i am saving up for some Tein HE's right now.

[MrMigs]

1997 240sx

removed
- A/C Condenser
- A/C Tubes & Compressor
- Stock Sideskirts
- Stock rear lights // Traded with 95/96 Rear Lights
- Stock intake resonator

added
- Custom exhaust
- Pilot Short shifter
- Super Small Steering Wheel
- Oil Cooler (needs repair)
- Misc. Cone Filter
- Viscous Limited Slip Differential (From 1994 Infinity J30)
- With pre-1995 J30 Axles

Suspension
- Whiteline Adjustable Swaybars
- Tanabe Sustec Pro S-S Coilovers
- Replaced 4kg rear springs with 8kg
- Current Springrate: 6kg in front // 8kg in rear
- Custom Made Subframe Spacers

Rollers
- Oldschool Ray's Engineering Wheels
- front: 17 x 7 +15 offset
- rear: 17 x 8 +20 offset
- Visa VK40G Tires (215/45/17) all around

[driftallcorners]

right on... nice set up.

c'mon guys 13 views and 1 reply... what's going on here?

[boro240]

Originally posted by MrMigs
- Current Springrate: 6kg in front // 8kg in rear

what? why do you have a HARDER spring rate in the rear?

[JonnySlick]

miata mx-5/roadster

****just picked it up couple of weeks ago so not a lot of work done to it yet*****

*1992 all stock roadster
*factory rims painted satin blk, removed center caps.
*SPAX 28 way adj. coilovers (coming next week yeah!)
*Flowfit seats waiting to be installed.

plans w/in next month:

*hard dog roll bar
*racing beat cat-back sport exhaust
*miatamania test pipe
*k&n cone filter
*tune up
*mazdaspeed clutch kit
*alignment and new front tires

[RoadblockTDX]

91 240SX hatch
17" Enkei's (came with car)
Shot suspension
An angry broke driver..

[DoriftuEvo]

I was going to start with suspension on my bimmer, but that blew up and my FF sentra isn't worth doing anything to.

[MrMigs]

Originally posted by boro240
what? why do you have a HARDER spring rate in the rear?

Insane oversteer is fun

[JonnySlick]

Originally posted by MrMigs
Insane oversteer is fun

ha ha!

[marshun]

just weight reduction on the corolla. no seats. panels sound deadening tar. cut out the skeleton off of the hood and doors. no carpet. cut the springs one coil to lower the car just a tad. i dont have enough money to get suspension mods. and im sellin the ae86 anyway.

[Takumi X]

AE86 is already light enough to obe a good drifter, why the weight reductions ? Just destroying a "good" interior in my opinion.

[frestylefc3s]

1990 fc3s turbo II

APEXi Intake
APEXi Turbo Timer
Koyo Aluminum Radiator
Fiero Electric-Fan
Greddy Boost Gauge
Greddy Water Temp. Gauge
Rotora Slotted Rotors
Porterfield RS4 Brake Pads
Cork Sport SS Braided Brake Lines
Racing Beat Adjustable Endlinks
Racing Beat FCD
Thunder Fabrication 3" Downpipe/Midpipe - 2.5" Exhaust
Gunmetal Watanabe RS8 - 16x7 front and 16x8 rear w/ Yokohama DNA GP's 225.50.16 and 245.50.16
Removed ABS System, AC System, Emissions System, Clutch Fan

[frestylefc3s]

Re: post your current setup

Originally posted by driftallcorners
i am saving up for some Tein HE's right now.

haha me tooooo - or knightsports coilovers

[TEINAGER]

New to the boards. Wassup to all!
Current set up includes Tein flex coilovers w/edfc (to be installed tomorrow) My apex n1's just blew out after 3yrs and 60k.
ST anti sway bars
Stillen front TC rods
Cusco rear arms
Nismo tower braces (front&rear)
Kaaz 2-way lsd
Nismo Power Brace (paid for,just waiting)
That's it for suspension mods on my s14.

[driftallcorners]

frestylefc3s... i like your mr. amemiya avatar. are you on any rotary message boards?