 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|
|||||||
This is a discussion on KAAZ LSD verification within the TECH Discussion Forum forums, part of the TECH Discussion category; I just picked up this lsd, and the guy I bought it from said it was a KAAZ LSD 2 ...
 |
|
|
Thread Tools | Rate Thread | Display Modes |
11-22-2004, 06:00 PM
|
#1 |
|
Newbie
Join Date: Nov 2004
Posts: 8
|
KAAZ LSD verification
I just picked up this lsd, and the guy I bought it from said it was a KAAZ LSD 2 way clutch type
new kind SAN2655 that doesn't need the output shafts. I just got the LSD and the bolts what else am I missing? I think I am also missing the bearings, but I can buy those Also is this a realy lsd? here are macro pics there is 18118 on the pic where I tried to do a close up thanks again http://www.villagephotos.com/pubbrow...der_id=1103301 i don't frequent boards much as my internet access is limited email me with response thanks again vze2rpr8@verizon.net |
|
|
|
11-22-2004, 06:23 PM
|
#2 |
|
Registered User
Join Date: Sep 2004
Location: 818 Area...
Posts: 383
|
yeah your missing the bearings and the shims.. that number is correct same as mine. Looks like a kaaz but my kaaz had the bearings installed on them already...
|
|
|
|
|
11-22-2004, 06:59 PM
|
#3 |
|
Newbie
Join Date: Nov 2004
Posts: 8
|
wow thats good new?
Where do i get the shims and the bearings from? And how do I tell if it is a 2 way is there a whole I can look through? |
|
|
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
