90 240sx cold air intake

Warped · 11-24-2004, 07:35 AM

i keep seeing intakes for 91 240's but not for the 90's. will the kit for the 91 fit my KA24E?

OH240SE · 11-24-2004, 08:26 AM

depending on what motor you have in ur car is how u buy ur intake. search out the intake for a KA24E, not a 1990.

jaydm180sx · 11-24-2004, 08:36 AM

Injen makes a cold air intake for the sohc KA, part# IS1900

Warped · 11-24-2004, 09:15 AM

it's just that i have been seeing listings for intakes for 91-94 240sx, but it's the same ka24e engine, so why wouldn't it be for the 90 as well
kinda like this one:
http://cgi.ebay.com/ebaymotors/ws/eB...category=38634

GRiDRaceTech · 11-24-2004, 03:54 PM

Different motors warrant different cold air intakes. The entire intake plenum of the KAE is completely different than that of the KADE, and the same goes for the intake tract. I'm fairly sure even the aftermarket intakes available for the DE go across the front of the engine compartment and then down into the wheel well, something I don't think the ones available for the E do. *Edit: both the E and DE ran across the radiator to the driver's side of the car.*

180sx2nr8u · 11-24-2004, 07:05 PM

before 91, the KA motors were single overhead cam, 91-94 models had the dohc KAs in them.

Warped · 11-25-2004, 06:37 PM

thanks, but that sucks considering hom many intakes i see for the KA24DE motors but not the Ka24E.

11-24-2004, 07:35 AM	#1
Warped Flippin nutball!!!! Join Date: Oct 2004 Location: Long iland, New york Posts: 119	90 240sx cold air intake i keep seeing intakes for 91 240's but not for the 90's. will the kit for the 91 fit my KA24E?

11-24-2004, 09:15 AM	#4
Warped Flippin nutball!!!! Join Date: Oct 2004 Location: Long iland, New york Posts: 119	it's just that i have been seeing listings for intakes for 91-94 240sx, but it's the same ka24e engine, so why wouldn't it be for the 90 as well kinda like this one: http://cgi.ebay.com/ebaymotors/ws/eB...category=38634 Last edited by Warped; 11-24-2004 at 09:25 AM.

11-24-2004, 03:54 PM	#5
GRiDRaceTech Opposite Lock Join Date: Jan 2004 Location: SoCal Posts: 1,096	Different motors warrant different cold air intakes. The entire intake plenum of the KAE is completely different than that of the KADE, and the same goes for the intake tract. I'm fairly sure even the aftermarket intakes available for the DE go across the front of the engine compartment and then down into the wheel well, something I don't think the ones available for the E do. Edit: both the E and DE ran across the radiator to the driver's side of the car. Last edited by GRiDRaceTech; 11-27-2004 at 12:05 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

11-24-2004, 08:26 AM	#2
OH240SE Flatland Honky Join Date: May 2004 Location: Ohio Posts: 247	depending on what motor you have in ur car is how u buy ur intake. search out the intake for a KA24E, not a 1990.

11-24-2004, 08:36 AM	#3
jaydm180sx Registered User Join Date: Jun 2004 Location: Georgia Posts: 350	Injen makes a cold air intake for the sohc KA, part# IS1900

11-24-2004, 07:05 PM	#6
180sx2nr8u The Shadow Drifters Join Date: Jan 2004 Location: Atlanta Posts: 140	before 91, the KA motors were single overhead cam, 91-94 models had the dohc KAs in them.

11-25-2004, 06:37 PM	#7
Warped Flippin nutball!!!! Join Date: Oct 2004 Location: Long iland, New york Posts: 119	thanks, but that sucks considering hom many intakes i see for the KA24DE motors but not the Ka24E.