MN SR Swaps?

driftking03 · 01-17-2005, 06:50 PM

hi I am a teenager from minnesota with a 1989 240 fastback and i was wondering if any one knows any where to get a swap done in the twin cities area?
also about how much would it cost ?

AlexPfeiffer · 01-17-2005, 07:11 PM

I dont know, but you should change your name. I'm sure your no driftking.

driftking03 · 01-17-2005, 07:12 PM

i know i am just begging but its an inside joke between my friends so i used it as my aol screen name

driftking03 · 01-17-2005, 07:13 PM

i meant beggining

tougeC · 01-17-2005, 07:13 PM

ouch Alex..lol...but i guess i see where your coming from....

driftking03 · 01-17-2005, 07:15 PM

i am kinda poor right now but what mods should i do first?
oh and i am pretty good at snow drifting though

tougeC · 01-17-2005, 07:18 PM

im no expert at all but i would say to work with what you have for now...and upgrade when you get better...

Stannyboy · 01-17-2005, 08:38 PM

suspension
LSD
Practice..

grift · 01-23-2005, 12:24 AM

the best thing to do is work on your own car. read, take your time. working on a car is so easy. why are people so scared to work on their cars? the swap is very easy just takes a bit of time. it takes me about a day now --however I have done several of them at first it took about 4 days. Were are you in MN? take stannyboy's advice the motor unless it does not run is good enough for now

driftking03 · 01-30-2005, 11:19 AM

i live in maple grove minnesota and sorry i havent been on in a while

Buddyworm · 01-30-2005, 07:53 PM

Quote:

Originally Posted by AlexPfeiffer

I dont know, but you should change your name. I'm sure your no driftking.

Now watch driftKing03 go pro and smoke the pants off Pfeiffer. :P Wouldn't that be a touch of dramatic irony.

B-Wurm

Nissan_Racer · 01-30-2005, 11:02 PM

I live in the Twin Cities area and I do my work myself its a great way to fall in love with your car. If you are just learning to slide then I wouldn’t be looking into an SR quite yet, first I would get brakes because for me learning how not to hit stuff saves your bank. Second I would go for suspension especially if you get something adjustable because you can tailor your springs for you not for some guy in a factory who thinks it looks good. Third I would find a good empty parking lot and have your insurance card and your dl on you at all times if you plan on drifting in maple grove (cops are a$ses). Other than that keep it off the street and most of all have fun, isnt that why we are all here?

01-17-2005, 06:50 PM	#1
driftking03 Registered User Join Date: Jan 2005 Posts: 8	MN SR Swaps? hi I am a teenager from minnesota with a 1989 240 fastback and i was wondering if any one knows any where to get a swap done in the twin cities area? also about how much would it cost ?

01-17-2005, 07:11 PM	#2
AlexPfeiffer Driver Join Date: May 2004 Posts: 765	I dont know, but you should change your name. I'm sure your no driftking. __________________ BattleVersion Mishimoto DDay Kaaz G-Dimension P2M BrianCrower CPpistons K&Wautobody Drifting.com RaysWheels SpeedOMotive Rotora AIT Racing AODA HouseOfKolor CompetitionClutch BullseyePower

01-23-2005, 12:24 AM	#9
grift Registered User Join Date: Jan 2004 Posts: 84	the best thing to do is work on your own car. read, take your time. working on a car is so easy. why are people so scared to work on their cars? the swap is very easy just takes a bit of time. it takes me about a day now --however I have done several of them at first it took about 4 days. Were are you in MN? take stannyboy's advice the motor unless it does not run is good enough for now Last edited by grift; 01-23-2005 at 12:27 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

01-17-2005, 07:12 PM	#3
driftking03 Registered User Join Date: Jan 2005 Posts: 8	i know i am just begging but its an inside joke between my friends so i used it as my aol screen name

01-17-2005, 07:13 PM	#4
driftking03 Registered User Join Date: Jan 2005 Posts: 8	i meant beggining

01-17-2005, 07:13 PM	#5
tougeC TougeMaster Join Date: Aug 2004 Location: Texas Posts: 150	ouch Alex..lol...but i guess i see where your coming from....

01-17-2005, 07:15 PM	#6
driftking03 Registered User Join Date: Jan 2005 Posts: 8	i am kinda poor right now but what mods should i do first? oh and i am pretty good at snow drifting though

01-17-2005, 07:18 PM	#7
tougeC TougeMaster Join Date: Aug 2004 Location: Texas Posts: 150	im no expert at all but i would say to work with what you have for now...and upgrade when you get better...

01-17-2005, 08:38 PM	#8
Stannyboy Registered User Join Date: Sep 2004 Location: 818 Area... Posts: 383	suspension LSD Practice..

01-30-2005, 11:19 AM	#10
driftking03 Registered User Join Date: Jan 2005 Posts: 8	i live in maple grove minnesota and sorry i havent been on in a while

01-30-2005, 11:02 PM	#12
Nissan_Racer So you eat babies I hear. Join Date: Jul 2003 Location: Here Posts: 60	I live in the Twin Cities area and I do my work myself its a great way to fall in love with your car. If you are just learning to slide then I wouldn’t be looking into an SR quite yet, first I would get brakes because for me learning how not to hit stuff saves your bank. Second I would go for suspension especially if you get something adjustable because you can tailor your springs for you not for some guy in a factory who thinks it looks good. Third I would find a good empty parking lot and have your insurance card and your dl on you at all times if you plan on drifting in maple grove (cops are a$ses). Other than that keep it off the street and most of all have fun, isnt that why we are all here?