 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|
|||||||
This is a discussion on S13- Power door lock within the TECH Discussion Forum forums, part of the TECH Discussion category; Has anyone had problems with the driver side door cylinder not locking/unlocking? The key will not turn in either direction. ...
 |
|
|
Thread Tools | Rate Thread | Display Modes |
01-18-2005, 01:13 PM
|
#1 |
|
Registered User
Join Date: Jan 2005
Location: New Jersey :(
Posts: 132
|
S13- Power door lock
Has anyone had problems with the driver side door cylinder not locking/unlocking? The key will not turn in either direction. I stopped cause I didn't want the key to snap. The inside latch is kinda stiff but works. Now I have to go thru the passenger side and unlock the door from the inside. Wazup?
|
|
|
|
01-18-2005, 02:02 PM
|
#2 |
|
Opposite Lock
Join Date: Jan 2004
Location: SoCal
Posts: 1,096
 |
I had the same problem. Then I took out the driver's lock cylinder and taped up the hole. What happened was that the resistance spring's mounting tabs broke off and the lock cylinder just spun freely.
I'm too cheap to replace the lock. |
|
|
|
|
01-18-2005, 06:23 PM
|
#3 |
|
Registered User
Join Date: Jan 2005
Location: New Jersey :(
Posts: 132
|
No man. My key will not turn or budge in the slightest. Could it be like a solenoid or something behind the door?
|
|
|
|
|
01-19-2005, 01:05 AM
|
#4 |
|
Opposite Lock
Join Date: Jan 2004
Location: SoCal
Posts: 1,096
|
Maybe your spring got jammed? Take the door apart and have a look-see.
|
|
|
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
