SR20DET; S13 Front-Clip for less than $1800??

forceFED_s14 · 01-30-2005, 04:43 PM

ive been lookin all over the internet and i cant find a website that sells the s13 front clip for less than 1800, does anyone have any good sites that sell this? anything will help

240silvia · 01-30-2005, 05:57 PM

that is a good deal! i have been searching for years that i can trust and that is the cheapest i have ever found

forceFED_s14 · 01-30-2005, 06:44 PM

is it a good deal without body panels and lights?

sr ^Drifter · 01-30-2005, 06:57 PM

i dunno its hard to find a hole front clip for less then 1800 i usualy see them around 2500-3500...inless u come apon a deal when there selling them to make more room for a new shipment... www.phase2motortrend.com has front clips starting at i think 2500...

Buddyworm · 01-30-2005, 07:46 PM

If it's got the ECU, MAF, Harness and Igniter you should be good to go. Front clips usually come with the stock SMIC and a bunch of other stuff as well so you hardly have to buy anything aftermarket to properly complete the swap.

B-Wurm

forceFED_s14 · 01-31-2005, 02:12 PM

so u think thats apurty good deal then? ill send the link so u can check it out to see what im talkin about

ZoltecRules · 02-01-2005, 03:42 PM

If this 1800 front clip you're talking about is from flashopitions.com, don't forget a few things:

1. No body panels or lights (extra 600)
2. No LSD or Rear Axles (extra 200, good deal IMO)
3. Shipping is ALOT (450 sea freight 45-65 days, 580 air freight 30 days)
4. Drivetrain has 40k miles on it

I got all this info from them.

Hope this helps. I was thinking about getting the SR20 from them too, but I think im gonna save up for LSD and suspension

LOVMUFN · 02-01-2005, 04:00 PM

I'll give you the front clip in my garage for 1800. I'll give you a deal and give it to you for 200... there is no motor in it ...but you can have it for cheap. Clips cost 1800 like 3 years ago. Now they go for MUCH more because everyone and their mom wants one.

forceFED_s14 · 02-02-2005, 07:54 PM

where's ur shop?

LOVMUFN · 02-03-2005, 07:39 AM

That was a joke. The front clip is in my garage waiting to go to the scrap yard.

AE86_drift · 02-05-2005, 10:30 PM

Most clips don't come with panels. And if they do, they are so damaged that you can't use them. You'd be better off buying that $1800 clip and ordering panels seperate. BTW, the more you pay for a clip, the better. I say this in all my posts about clips, but check out www.jarcoinc.com. They are a little pricey, but you get the diff with the clip. Plus, they give you 10% off of panels if you order your clip through them...

01-30-2005, 04:43 PM	#1
forceFED_s14 Registered User Join Date: Dec 2004 Location: st.pete, FL Posts: 11	SR20DET; S13 Front-Clip for less than $1800?? ive been lookin all over the internet and i cant find a website that sells the s13 front clip for less than 1800, does anyone have any good sites that sell this? anything will help

01-30-2005, 05:57 PM	#2
240silvia Registered User Join Date: Jul 2004 Posts: 355	clip that is a good deal! i have been searching for years that i can trust and that is the cheapest i have ever found

01-30-2005, 07:46 PM	#5
Buddyworm Registered User Join Date: Sep 2004 Location: Alberta, Canada Posts: 299	If it's got the ECU, MAF, Harness and Igniter you should be good to go. Front clips usually come with the stock SMIC and a bunch of other stuff as well so you hardly have to buy anything aftermarket to properly complete the swap. B-Wurm Last edited by Buddyworm; 01-30-2005 at 07:49 PM.

02-01-2005, 03:42 PM	#7
ZoltecRules Registered User Join Date: Jan 2005 Location: Evanston, IL Posts: 235	S13 Front End If this 1800 front clip you're talking about is from flashopitions.com, don't forget a few things: 1. No body panels or lights (extra 600) 2. No LSD or Rear Axles (extra 200, good deal IMO) 3. Shipping is ALOT (450 sea freight 45-65 days, 580 air freight 30 days) 4. Drivetrain has 40k miles on it I got all this info from them. Hope this helps. I was thinking about getting the SR20 from them too, but I think im gonna save up for LSD and suspension Last edited by ZoltecRules; 02-01-2005 at 04:17 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

01-30-2005, 06:44 PM	#3
forceFED_s14 Registered User Join Date: Dec 2004 Location: st.pete, FL Posts: 11	is it a good deal without body panels and lights?

01-30-2005, 06:57 PM	#4
sr ^Drifter kitchen fresh chicken Join Date: Jun 2004 Location: Vancouver, WA Posts: 145	i dunno its hard to find a hole front clip for less then 1800 i usualy see them around 2500-3500...inless u come apon a deal when there selling them to make more room for a new shipment... www.phase2motortrend.com has front clips starting at i think 2500...

01-31-2005, 02:12 PM	#6
forceFED_s14 Registered User Join Date: Dec 2004 Location: st.pete, FL Posts: 11	so u think thats apurty good deal then? ill send the link so u can check it out to see what im talkin about

02-01-2005, 04:00 PM	#8
LOVMUFN Drift Assoc. - Lead Tech Join Date: Aug 2004 Location: Ventura, CA Posts: 257	I'll give you the front clip in my garage for 1800. I'll give you a deal and give it to you for 200... there is no motor in it ...but you can have it for cheap. Clips cost 1800 like 3 years ago. Now they go for MUCH more because everyone and their mom wants one.

02-02-2005, 07:54 PM	#9
forceFED_s14 Registered User Join Date: Dec 2004 Location: st.pete, FL Posts: 11	where's ur shop?

02-03-2005, 07:39 AM	#10
LOVMUFN Drift Assoc. - Lead Tech Join Date: Aug 2004 Location: Ventura, CA Posts: 257	That was a joke. The front clip is in my garage waiting to go to the scrap yard.

02-05-2005, 10:30 PM	#11
AE86_drift Keepin it sideways Join Date: May 2004 Location: Green Bay, WI Posts: 115	Most clips don't come with panels. And if they do, they are so damaged that you can't use them. You'd be better off buying that $1800 clip and ordering panels seperate. BTW, the more you pay for a clip, the better. I say this in all my posts about clips, but check out www.jarcoinc.com. They are a little pricey, but you get the diff with the clip. Plus, they give you 10% off of panels if you order your clip through them...