AE86 3 Rotor

Dr Wankel · 03-07-2005, 01:50 PM

Greetings! I was a RX7 owner. I was thinking about transplanting a 20b on a 85 RX7 (1st gen). I also own an SR5, i want to put my 3 rotor into it. I have seen a video of a AE86 blasting thru a highway. I cannot find anywhere the details of that conversion. Anyone out there done it? Or knows any links with some info on the actual conversion?

Thanks!

zerodrifter · 03-07-2005, 01:53 PM

sorry i don't have any info to help you on your swap. However i do a vid of a 20b in a ae86. I'll try to find the old post, if not can anyone host?

zerodrifter · 03-07-2005, 01:59 PM

the movie is at ....
http://www.nightracer.com/3rotorae86.asx

you got me thinking about it now, i'll try to search some more
hope that helps, or just amuse

TeamSLIPdrifter · 03-07-2005, 02:03 PM

***DROOL!!!!***

SOOOOOOOOOOOOOOOOOOOOOOOOO NICE! Lol, im actually thinking of getting a crx and putting a rotory motor into it.

Buddyworm · 03-07-2005, 04:28 PM

You gonna drift that CRX?

B-Wurm

UberSpeed · 03-07-2005, 05:16 PM

The only thing missing from that video is "Bohemian Rhapsody" blasting in the background.

I always get a chuckle out of that video, watching 3 buddies yell, scream, and laugh their asses of in a tiny little car.

theflatlander · 03-08-2005, 12:27 AM

its gonna take a custom subframe, plus a lot of other fabbin for this conversion(tranny mounts, custom drivetrain ,chassis reinforcement, etc).Hope you're rich.

03-08-2005, 03:34 AM

My quad-rotor86 will be done shortly. I'm gonna pull up to a cop. And then smoke em in every gear

TeamSLIPdrifter · 03-08-2005, 04:58 AM

If i really wanted to i can make the crx rear wheel drive and mid mounted. plenty of room in the hatch and uber weight distribution. And yes, i do have the money to do this.

SidewaysGts · 03-08-2005, 05:57 AM

^-- Go nuts and let us see

Id gladly take an aw11, but hey anyone into racing should never argue the "practicality" of automotives without a brisk back hand to the face

darknessrideson · 03-08-2005, 07:22 AM

I recently bought a RX-7 91 model non-turbo. I have been searching the web for turbo upgrades for a non-turbo RX-7. Is there anyone who can give me some info on this?

Thanks,

Dr Wankel · 03-08-2005, 07:38 AM

its gonna take a custom subframe, plus a lot of other fabbin for this conversion(tranny mounts, custom drivetrain ,chassis reinforcement, etc).Hope you're rich

Not rich, but i have a friend that does fabrication. Excellent work.Sometimes its not how fat your wallet is , but how long you can strech your cash, knowing the right people helps. I figured its going to take a lot of work. I saw the Best Motoring , Battle a 10,000 RPM,s. The gent from Hot Staff transplanted a S2000 engine with 6 speed tranny and all. I am just hopping that i dont have to cut too much on the tranny tunnel. Definetly a custom drive shaft with the small list of things you mentioned. He listed the price for all that work at 4.4 million yen. That is a lot.

TeamSLIPdrifter · 03-10-2005, 04:31 AM

4.4 million yen..... isnt that like 4000 dollers?

240LoVeR · 03-10-2005, 05:41 AM

TeamSLIPdrifter 4.4 million yen..... isnt that like 4000 dollers?

no 1,000,000 yen equals about 9700 dollars

so 4.4 mill yen equals around 42680 dollars!!

Dr Wankel · 03-10-2005, 06:47 AM

Yes sir. But if you watch the video, the vehicle was very impresive. By the way, that price quoted does NOT include tires and rims.

HITANDRUNCREW · 03-10-2005, 07:37 AM

you can do a lot of the work your self. you will have to get the motor mounts and drive shaft made. besides that you can do all the wiring.

driftex · 03-10-2005, 02:36 PM

Quote:

Originally Posted by meadespeed

My quad-rotor86 will be done shortly. I'm gonna pull up to a cop. And then smoke em in every gear

how do you have a quad rotor motor? no ofense but this has got to be b.s.

SidewaysGts · 03-10-2005, 07:01 PM

Actualy, its not- its been done before. The nice thing about the rotary is they nearly stack on themself. leaving you the problem of getting a e-shaft built for them. Ive heard of and -seen- a few people who have stacked 12a engines together, and one who has stacked 13bs on themself (onyl seen the 13b in video).

Theres even pictures of a 6 rotor engine- ill try to find it for ya.

Now as to weather or not THIS guy went throug the troble of buildign a 4 rotor, I wont know until i see it. BUT its far from impossible.

SidewaysGts · 03-10-2005, 07:02 PM

Feast your eyes on this beast, i havent seen this picture before- only ones i had seen (which is the one i was looking for) is the guy giving a sneak peak from under a sheet, this thing looks nice...

zerodrifter · 03-10-2005, 07:40 PM

hold monkey poo

my jaw is on the floor, wtf did you find that pic.Site?

SidewaysGts · 03-11-2005, 12:43 PM

Googled 6 rotor in the images section, just needed a pic

Valkyrie · 03-13-2005, 12:42 AM

In the one video I saw of the 3-rotor Hachiroku, the guy said "$60,000 (US) for 600 horsepower."

60,000,000 yen...

apexdrift · 03-13-2005, 01:31 PM

you can do anything if you have money!... my buddy swaped in a SR20 in his FC then took that out and is swapping in a F22C... another buddy just swapped in a 600HP beast of a RB26 in his S14...money = whatever you want!

zerodrifter · 03-13-2005, 02:05 PM

Quote:

Originally Posted by apexdrift

you can do anything if you have money!... my buddy swaped in a SR20 in his FC then took that out and is swapping in a F22C... another buddy just swapped in a 600HP beast of a RB26 in his S14...money = whatever you want!

in the world or car building money = happiness

Valkyrie · 03-13-2005, 03:31 PM

Quote:

Originally Posted by apexdrift

you can do anything if you have money!... my buddy swaped in a SR20 in his FC then took that out and is swapping in a F22C...

Your buddy sucks at choosing engines

03-07-2005, 01:50 PM	#1
Dr Wankel Registered User Join Date: Nov 2004 Location: Tampax Fl Posts: 5	AE86 3 Rotor Greetings! I was a RX7 owner. I was thinking about transplanting a 20b on a 85 RX7 (1st gen). I also own an SR5, i want to put my 3 rotor into it. I have seen a video of a AE86 blasting thru a highway. I cannot find anywhere the details of that conversion. Anyone out there done it? Or knows any links with some info on the actual conversion? Thanks!

03-08-2005, 03:34 AM	#8
meadespeed Guest Posts: n/a	Who knows Which Voption this iz? My quad-rotor86 will be done shortly. I'm gonna pull up to a cop. And then smoke em in every gear

03-08-2005, 07:22 AM	#11
darknessrideson User Join Date: Mar 2005 Posts: 1	Turbo Upgrade: I recently bought a RX-7 91 model non-turbo. I have been searching the web for turbo upgrades for a non-turbo RX-7. Is there anyone who can give me some info on this? Thanks,

03-08-2005, 07:38 AM	#12
Dr Wankel Registered User Join Date: Nov 2004 Location: Tampax Fl Posts: 5	reply its gonna take a custom subframe, plus a lot of other fabbin for this conversion(tranny mounts, custom drivetrain ,chassis reinforcement, etc).Hope you're rich Not rich, but i have a friend that does fabrication. Excellent work.Sometimes its not how fat your wallet is , but how long you can strech your cash, knowing the right people helps. I figured its going to take a lot of work. I saw the Best Motoring , Battle a 10,000 RPM,s. The gent from Hot Staff transplanted a S2000 engine with 6 speed tranny and all. I am just hopping that i dont have to cut too much on the tranny tunnel. Definetly a custom drive shaft with the small list of things you mentioned. He listed the price for all that work at 4.4 million yen. That is a lot.

03-10-2005, 06:47 AM	#15
Dr Wankel Registered User Join Date: Nov 2004 Location: Tampax Fl Posts: 5	reply Yes sir. But if you watch the video, the vehicle was very impresive. By the way, that price quoted does NOT include tires and rims.

03-07-2005, 01:53 PM	#2
zerodrifter Registered User Join Date: Aug 2004 Location: North East Posts: 373	sorry i don't have any info to help you on your swap. However i do a vid of a 20b in a ae86. I'll try to find the old post, if not can anyone host?

03-07-2005, 01:59 PM	#3
zerodrifter Registered User Join Date: Aug 2004 Location: North East Posts: 373	the movie is at .... http://www.nightracer.com/3rotorae86.asx you got me thinking about it now, i'll try to search some more hope that helps, or just amuse

03-07-2005, 02:03 PM	#4
TeamSLIPdrifter Nice rx7, is it 4 or 6cyl Join Date: Jul 2004 Location: Bartlett, Illinois Posts: 154	*DROOL!!!!* SOOOOOOOOOOOOOOOOOOOOOOOOO NICE! Lol, im actually thinking of getting a crx and putting a rotory motor into it.

03-07-2005, 04:28 PM	#5
Buddyworm Registered User Join Date: Sep 2004 Location: Alberta, Canada Posts: 299	You gonna drift that CRX? B-Wurm

03-07-2005, 05:16 PM	#6
UberSpeed Registered User Join Date: Aug 2004 Location: Minneapolis MN Posts: 211	The only thing missing from that video is "Bohemian Rhapsody" blasting in the background. I always get a chuckle out of that video, watching 3 buddies yell, scream, and laugh their asses of in a tiny little car.

03-08-2005, 12:27 AM	#7
theflatlander Registered User Join Date: Dec 2003 Location: North Dakota Posts: 393	its gonna take a custom subframe, plus a lot of other fabbin for this conversion(tranny mounts, custom drivetrain ,chassis reinforcement, etc).Hope you're rich.

03-08-2005, 04:58 AM	#9
TeamSLIPdrifter Nice rx7, is it 4 or 6cyl Join Date: Jul 2004 Location: Bartlett, Illinois Posts: 154	If i really wanted to i can make the crx rear wheel drive and mid mounted. plenty of room in the hatch and uber weight distribution. And yes, i do have the money to do this.

03-08-2005, 05:57 AM	#10
SidewaysGts Registered User Join Date: Aug 2004 Posts: 421	^-- Go nuts and let us see Id gladly take an aw11, but hey anyone into racing should never argue the "practicality" of automotives without a brisk back hand to the face

03-10-2005, 04:31 AM	#13
TeamSLIPdrifter Nice rx7, is it 4 or 6cyl Join Date: Jul 2004 Location: Bartlett, Illinois Posts: 154	4.4 million yen..... isnt that like 4000 dollers?

03-10-2005, 05:41 AM	#14
240LoVeR Registered User Join Date: Aug 2004 Location: minnesota Posts: 130	TeamSLIPdrifter 4.4 million yen..... isnt that like 4000 dollers? no 1,000,000 yen equals about 9700 dollars so 4.4 mill yen equals around 42680 dollars!!

03-10-2005, 07:37 AM	#16
HITANDRUNCREW THE DORI RANGER Join Date: Dec 2004 Location: sacramento Posts: 195	you can do a lot of the work your self. you will have to get the motor mounts and drive shaft made. besides that you can do all the wiring.

03-10-2005, 07:01 PM	#18
SidewaysGts Registered User Join Date: Aug 2004 Posts: 421	Actualy, its not- its been done before. The nice thing about the rotary is they nearly stack on themself. leaving you the problem of getting a e-shaft built for them. Ive heard of and -seen- a few people who have stacked 12a engines together, and one who has stacked 13bs on themself (onyl seen the 13b in video). Theres even pictures of a 6 rotor engine- ill try to find it for ya. Now as to weather or not THIS guy went throug the troble of buildign a 4 rotor, I wont know until i see it. BUT its far from impossible.

03-10-2005, 07:02 PM	#19
SidewaysGts Registered User Join Date: Aug 2004 Posts: 421	Feast your eyes on this beast, i havent seen this picture before- only ones i had seen (which is the one i was looking for) is the guy giving a sneak peak from under a sheet, this thing looks nice...

03-10-2005, 07:40 PM	#20
zerodrifter Registered User Join Date: Aug 2004 Location: North East Posts: 373	hold monkey poo my jaw is on the floor, wtf did you find that pic.Site?

03-11-2005, 12:43 PM	#21
SidewaysGts Registered User Join Date: Aug 2004 Posts: 421	Googled 6 rotor in the images section, just needed a pic

03-13-2005, 12:42 AM	#22
Valkyrie Registered User Join Date: Oct 2004 Location: Bama Posts: 161	In the one video I saw of the 3-rotor Hachiroku, the guy said "$60,000 (US) for 600 horsepower." 60,000,000 yen...

03-13-2005, 01:31 PM	#23
apexdrift Registered User Join Date: Jan 2005 Posts: 17	you can do anything if you have money!... my buddy swaped in a SR20 in his FC then took that out and is swapping in a F22C... another buddy just swapped in a 600HP beast of a RB26 in his S14...money = whatever you want!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: