Oil pan skid plate?

free motion · 08-04-2005, 08:13 AM

I have an s13 on Cusco coilovers and my oil pan is getting scraped up. I really don't like this and I was wondering if anyone had custom made or seen any skid plates for the s13. Any info would be very helpful.

Pennyman · 08-05-2005, 07:31 PM

You could probably make one. Lift the car and look for some mounting points you can use to attach a peice of metal. Check out some industrial supply shops in your area and ask which metal type/thickness would be ideal, without adding too much weight. Then use some metal snips or get the metal cut to whatever size is optimal, then install. You'll be the envy of all your friends!

Aiki-Drift · 08-05-2005, 07:37 PM

I got my skidplate on ebay for $80.

free motion · 08-09-2005, 08:26 AM

Thanks for the suggs guys.

ZoltecRules · 08-11-2005, 07:03 AM

Kazamma makes one:
http://www.driftday.com/kazama.htm

mranlet · 08-11-2005, 07:35 PM

http://www.silkroad-usa.com/pages/si...ts/ugplate.htm
Contact sales@dgtrials.com for a wicked deal if you take lots of pics of the install.

or...

http://cgi.ebay.com/ebaymotors/ws/eB...category=42609

S13freak · 08-23-2005, 10:48 PM

Got one off ebay for 35 dollars. WOrks like a chram.

08-04-2005, 08:13 AM	#1
free motion SW VA Join Date: Aug 2003 Location: Roanoke, Virginia Posts: 86	Oil pan skid plate? I have an s13 on Cusco coilovers and my oil pan is getting scraped up. I really don't like this and I was wondering if anyone had custom made or seen any skid plates for the s13. Any info would be very helpful.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

08-05-2005, 07:31 PM	#2
Pennyman A ring a ding ding... Join Date: Dec 2003 Location: Santa Cruz, CA Posts: 380	You could probably make one. Lift the car and look for some mounting points you can use to attach a peice of metal. Check out some industrial supply shops in your area and ask which metal type/thickness would be ideal, without adding too much weight. Then use some metal snips or get the metal cut to whatever size is optimal, then install. You'll be the envy of all your friends!

08-05-2005, 07:37 PM	#3
Aiki-Drift Registered User Join Date: Jan 2005 Location: New Jersey :( Posts: 132	I got my skidplate on ebay for $80.

08-09-2005, 08:26 AM	#4
free motion SW VA Join Date: Aug 2003 Location: Roanoke, Virginia Posts: 86	Thanks for the suggs guys.

08-11-2005, 07:03 AM	#5
ZoltecRules Registered User Join Date: Jan 2005 Location: Evanston, IL Posts: 235	Kazamma makes one: http://www.driftday.com/kazama.htm

08-11-2005, 07:35 PM	#6
mranlet Smokes Dynamite Join Date: Dec 2003 Location: Tampa, CT, all over the place! Posts: 1,090	http://www.silkroad-usa.com/pages/si...ts/ugplate.htm Contact sales@dgtrials.com for a wicked deal if you take lots of pics of the install. or... http://cgi.ebay.com/ebaymotors/ws/eB...category=42609

08-23-2005, 10:48 PM	#7
S13freak User Join Date: Jul 2005 Posts: 3	Got one off ebay for 35 dollars. WOrks like a chram.