Go Back   DRIFTING.com > TECH Discussion > TECH Discussion Forum
Register FAQ Calendar Search Today's Posts Mark Forums Read

Cefiro 5 lug

This is a discussion on Cefiro 5 lug within the TECH Discussion Forum forums, part of the TECH Discussion category; Next summer when i return to japan im buying a Cefiro. prolly a 92 or so but A31 for sure. ...

Reply
 
Thread Tools Rate Thread Display Modes
Old 11-25-2005, 07:42 PM   #1
Perry
User
 
Perry's Avatar
 
Join Date: Nov 2005
Location: Korea
Posts: 5
Question Cefiro 5 lug

Next summer when i return to japan im buying a Cefiro. prolly a 92 or so but A31 for sure. I want to swap to 5 lug and put 18's on it. i've heard you can use 300zx rotars and spindles on the rear. What i wanna know is if anyone any info or links to help me with the swap. Was also wondering if brembros from a gtr will fit? thnx for any help!

the sr20 conversion is my next question!
Perry is offline   Reply With Quote
Old 11-27-2005, 06:14 AM   #2
DriftKE70
User
 
Join Date: Nov 2005
Posts: 5
R32 front and rear hubs as well as tie rods.

SR20 swap is easy. Just get a SR20 cross member.
DriftKE70 is offline   Reply With Quote
Old 11-27-2005, 06:51 AM   #3
driftex
Drift Snowman Squad
 
driftex's Avatar
 
Join Date: Dec 2004
Posts: 222
Since A31s are simlar to to the S series i'm guessing that it would be pretty similar. The brembos should fit.
driftex is offline   Reply With Quote
Old 11-27-2005, 10:38 PM   #4
Leroy0053
Registered User
 
Join Date: Dec 2004
Location: Texas/Afghanistan(civilian contractor)
Posts: 40
Perry what up man....hit me up on yahoo im....keep buzzin i work from 230pm to 1230am. hit me up.
Leroy0053 is offline   Reply With Quote
Old 11-30-2005, 07:02 AM   #5
ZoltecRules
Registered User
 
ZoltecRules's Avatar
 
Join Date: Jan 2005
Location: Evanston, IL
Posts: 235
Send a message via AIM to ZoltecRules Send a message via Yahoo to ZoltecRules
A31s are pretty much set up exactly like an s13. In the rear you can just swap the hubs from a z32, r32, S14 SE, etc. Don't swap the spindles from a z32 unless you want to switch to Z32 shocks also.

In front just do the gto/attain hubs for an s13 OR the s14 SE swap.
ZoltecRules is offline   Reply With Quote
Old 11-30-2005, 11:20 AM   #6
180drifter06
User
 
Join Date: Nov 2005
Posts: 14
hey perry not to go off topic but i was planning to go to japan also now i was looking at various places to stay and i was wondering what is out there work wise for an american other than teaching and such?
180drifter06 is offline   Reply With Quote
Old 11-30-2005, 11:57 PM   #7
Leroy0053
Registered User
 
Join Date: Dec 2004
Location: Texas/Afghanistan(civilian contractor)
Posts: 40
aircraft, if you have prior experience. go to usajobs.com perry was my supervisor when i was in the airforce stationed over there. i will be in mainland hopefully in the next year. hey perry roger is in korea and i am thinkin about headin there, cause our lead man there runs the tokyo contract too.
Leroy0053 is offline   Reply With Quote
Old 12-02-2005, 03:08 AM   #8
Perry
User
 
Perry's Avatar
 
Join Date: Nov 2005
Location: Korea
Posts: 5
Hey guys thanks for all the help! hope to post pictures in mid august! .... LEROY! waddup man? im not sure wassup with the MI site....but im thinking of putting up my own so all of the crew can get hooked back up. dude....skip korea.... i leave for mainland japan in july! already got a a31 in the philippines sitting in my driveway for retirement! 5 speed and the article said it had a rb24 in it.... dunno havent seen in cept for pictures. I plan to get a Ceffy in japan and hook it up ...then ship all the parts to the crib in the PI. I'll yap at ya on YAHOO!

180drifter06,
Like leroy said ....there are alot of jobs if you have any aircraft backround. it mostly depends on you. if ya like send me some of your backround info and i can try to see whats open there.
Perry is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -7. The time now is 05:11 PM.


All times are GMT -7. The time now is 05:11 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.6.0