RB25DET Swap

SIK Drifter · 01-31-2006, 10:49 PM

I am in the middle of doing a RB25DET swap in my 89 240 and i am really fearing my wiring harness conversion. I would go with sending it off to Mckinney's to let them splice them together but i heard it will take a while for me to get it back! So now im wondering if i can do the wiring harness conversion myself if you have done this how hard is it and do you have an RB25DET wiring harness diagram?

so if anyone has any pointers that may be usefull i would really appreciate it!!

Jaggorri · 02-01-2006, 01:18 PM

http://rb25det.org/

You should be able to find your answers there.

SIK Drifter · 02-02-2006, 12:36 PM

Yea that was alot of help!

There was a dead link in the page about the 8 steps to wiring the rb to the 240 but all in all it was a big help!

But if anyone has the list of steps it would be a greater help!

Jaggorri · 02-03-2006, 11:19 AM

I know NICO had quite a bit of info regarding the RB swap into the S13/14 chassis along with the 240sx forums as well, so you might want to look into those.

01-31-2006, 10:49 PM	#1
SIK Drifter User Join Date: Jan 2006 Posts: 2	RB25DET Swap I am in the middle of doing a RB25DET swap in my 89 240 and i am really fearing my wiring harness conversion. I would go with sending it off to Mckinney's to let them splice them together but i heard it will take a while for me to get it back! So now im wondering if i can do the wiring harness conversion myself if you have done this how hard is it and do you have an RB25DET wiring harness diagram? so if anyone has any pointers that may be usefull i would really appreciate it!!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

02-01-2006, 01:18 PM	#2
Jaggorri Registered User Join Date: Jun 2004 Posts: 90	http://rb25det.org/ You should be able to find your answers there.

02-02-2006, 12:36 PM	#3
SIK Drifter User Join Date: Jan 2006 Posts: 2	Yea that was alot of help! There was a dead link in the page about the 8 steps to wiring the rb to the 240 but all in all it was a big help! But if anyone has the list of steps it would be a greater help!

02-03-2006, 11:19 AM	#4
Jaggorri Registered User Join Date: Jun 2004 Posts: 90	I know NICO had quite a bit of info regarding the RB swap into the S13/14 chassis along with the 240sx forums as well, so you might want to look into those.