Need to clean the head...

FD3S_pilot · 02-14-2007, 09:52 PM

Headgasket went out of the ae..
i pulled the valve cover and there that crap on the head..

so i do use to clean all the coffee color coolant oil mixed crap off the head and stuff..

racer555 · 02-15-2007, 07:17 AM

Just send it out to a machine shop. After blowing a head gasket you should have the head checked to make sure the mating surface to the block is still true anyways, and while its there they can clean it up for ya. If you're gonna do it yourself just get some parts solvent and a good scrub brush (just be careful if you use a metal scrub brush).

sdtouge · 02-16-2007, 04:17 AM

pour coffee in it to wake it up

UNITEDMASTER · 02-16-2007, 09:56 AM

Hot tank the biiaatch

02-14-2007, 09:52 PM	#1
FD3S_pilot mmmm...Spirit R...... Join Date: May 2004 Location: Santa Rosa,CA Posts: 785	Need to clean the head... Headgasket went out of the ae.. i pulled the valve cover and there that crap on the head.. so i do use to clean all the coffee color coolant oil mixed crap off the head and stuff..

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

02-15-2007, 07:17 AM	#2
racer555 Registered User Join Date: Dec 2004 Location: Las Vegas, NV Posts: 60	Just send it out to a machine shop. After blowing a head gasket you should have the head checked to make sure the mating surface to the block is still true anyways, and while its there they can clean it up for ya. If you're gonna do it yourself just get some parts solvent and a good scrub brush (just be careful if you use a metal scrub brush).

02-16-2007, 04:17 AM	#3
sdtouge Registered User Join Date: Jul 2004 Location: san diego Posts: 868	pour coffee in it to wake it up

02-16-2007, 09:56 AM	#4
UNITEDMASTER Registered User Join Date: Nov 2005 Location: ANAHEIM Posts: 310	Hot tank the biiaatch