MK-II Supra Drift CAr Build (In process) Ideas?

03-06-2008, 01:37 PM

OK so this is my second car i will attempt to build.
Its an 84 Supra MK-II
I want to make it a balanced Touge/Track Drift Car
Im havin some trouble locating parts, and brainstorming ideas on the build
Any help would be very much apprecitaed

Thanks
__________________________________________________ _______________
SWAMPLAND

Piner · 03-06-2008, 02:09 PM

replace all the bushings in the suspension with polyurethane, get your diff rebuilt(new clutch plates for the LSD) chassis stiffening aids (strut tower bars etc) Maybe a cage depending on how serious you are, set of coilovers if you can find them if not make a set and use adjustable shocks.

Nice good locking clutch plus a free flowing exhaust and that should do you for quite a good while

03-10-2008, 12:45 PM

thanks man, the roll cage is a must, my s13 didnt have one and i was nearly crushed in it when i got in my accident
do you have any good websites that have some of this stuff? cuz it seems to be pretty dang hard to find legit parts, i was lucky enough to find some sick wannabes 17' on ebay. Im tryin to keep it inside a clean JDM style, but the parts are so hard to fine. I got the 5M-GE in with a factory turbo, but new stuff is hard to come by
__________________________________________________ _______________
SWAMPLAND

03-06-2008, 01:37 PM	#1
swampslide615 Guest Posts: n/a	MK-II Supra Drift CAr Build (In process) Ideas? OK so this is my second car i will attempt to build. Its an 84 Supra MK-II I want to make it a balanced Touge/Track Drift Car Im havin some trouble locating parts, and brainstorming ideas on the build Any help would be very much apprecitaed Thanks __________________________________________________ _______________ SWAMPLAND

03-06-2008, 02:09 PM	#2
Piner Registered User Join Date: Jun 2004 Location: Ramstein AB, Germany Posts: 768	replace all the bushings in the suspension with polyurethane, get your diff rebuilt(new clutch plates for the LSD) chassis stiffening aids (strut tower bars etc) Maybe a cage depending on how serious you are, set of coilovers if you can find them if not make a set and use adjustable shocks. Nice good locking clutch plus a free flowing exhaust and that should do you for quite a good while __________________ http://e36driftbag.blogspot.com/ 1999 Toyota Chaser Turbo (Germany) 1998 BMW 328is S52 swap (USA car) 199? Nissan Cefiro Turbo (Japan car) Hold my Dragon!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

03-10-2008, 12:45 PM	#3
swampslide615 Guest Posts: n/a	thanks man, the roll cage is a must, my s13 didnt have one and i was nearly crushed in it when i got in my accident do you have any good websites that have some of this stuff? cuz it seems to be pretty dang hard to find legit parts, i was lucky enough to find some sick wannabes 17' on ebay. Im tryin to keep it inside a clean JDM style, but the parts are so hard to fine. I got the 5M-GE in with a factory turbo, but new stuff is hard to come by __________________________________________________ _______________ SWAMPLAND