 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|
|||||||
This is a discussion on ca18det HELP S!# within the TECH Discussion Forum forums, part of the TECH Discussion category; S13 I have heard there are a few people that have done the swap on this forum.......Well I need some ...
 |
|
|
Thread Tools | Rate Thread | Display Modes |
03-11-2004, 07:48 PM
|
#1 |
|
Newbie
Join Date: Mar 2004
Posts: 1
|
ca18det HELP S!#
S13
I have heard there are a few people that have done the swap on this forum.......Well I need some help I need to know what the 4 vacuum sources underneath the intake manifold go to or if they can be capped off? running a FMIC and a aftermarket BOV no boost controller or anything just a base swap also where the large vacuum off of the valve cove goes to the rear one if not running a catch can. any help would be good, if you have a phone number you can PM me that might make it a little quicker your choice. Thanks alot Mike |
|
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
