![]() |
|||||||||||
|
|
|||||||||||
|
|||||||||||
|
|
|
|||||||
This is a discussion on VLSD Parts? within the TECH Discussion Forum forums, part of the TECH Discussion category; I have a 300z VLSD that I am going to put on my S13 (240 for those that don't believe ...
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
#1 |
|
Drifter XLT
|
VLSD Parts?
I have a 300z VLSD that I am going to put on my S13 (240 for those that don't believe in body codes). Yesterday I priced the output shafts and rear cover from my local Nissan dealer...they are on crack! They want over $500 for the 3 parts.
My question, where can I get this stuff for cheaper? P.S. There are no salvage yards around my town (madness). |
|
|
|
|
|
#2 |
|
Registered User
Join Date: Feb 2004
Posts: 138
|
|
|
|
|
|
|
#3 |
|
Drifter XLT
|
B/C it's still an upgrade from the open diff. Once I can afford a "Real" LSD I will get one that drops into the VLSD case. The drop in LSDs that I have seen won't work in the open case.
BTW, did I mention that I fried my open diff this weekend? Thanks for the link, anyone have any other suggestions? Last edited by Godfather; 03-23-2004 at 09:33 AM. |
|
|
|
|
|
#4 |
|
Registered User
|
I would say look for a used one at a junk yard 40-75 bucks depending on ur local yard.
Or find a used one on partstrader.com =) |
|
|
|
|
|
#5 |
|
Drifter XLT
|
That was the problem...I couldn't find any slavage yards witihin an hour of here. The problem is solved though, I have a complete rear end on the way. It has a little secret hiding inside too...Nismo 2way
Anyone want to buy an n/a 300z rear? |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|