Go Back   DRIFTING.com > TECH Discussion > TECH Discussion Forum
Register FAQ Calendar Search Today's Posts Mark Forums Read

basic car mods

This is a discussion on basic car mods within the TECH Discussion Forum forums, part of the TECH Discussion category; hey guys this is my first post. just for the record i loved drifting (safely) and racing even before the ...

Reply
 
Thread Tools Rate Thread Display Modes
Old 07-08-2003, 11:00 PM   #1
uselessradio
touge or drift?
 
Join Date: Jul 2003
Location: GUAM
Posts: 15
basic car mods

hey guys this is my first post. just for the record i loved drifting (safely) and racing even before the fast and the furious hit the movies. anyways, i drive a 91 240sx LE hatchback and the only mods it had was an injen intake. im on the process of dropping my car to. Im currently thinking of getting my friend's VLSD from his junk 240 and im gonna get a new clutch system. my question is if you had a chance to only run headers or exhaust which would you pick and why? im modifying my car slowly because id ont have my momies and daddies to help me builkd up my car. and any mods that i should be applying to my car in terms of drifitng and racing???
uselessradio is offline   Reply With Quote
Old 07-09-2003, 11:58 AM   #2
MrMigs
Land Ho!!
 
MrMigs's Avatar
 
Join Date: Jun 2003
Location: San Gabriel, CA
Posts: 114
Send a message via ICQ to MrMigs Send a message via AIM to MrMigs
headers seem to make more of a difference. For drifting, start with the LSD like you are... then just stiffen up the suspension with coilovers and some swaybars. Actually, you don't even need that stuff, so practice on stock suspension, and if it doesn't feel right, THEN get coilovers and swaybars
MrMigs is offline   Reply With Quote
Old 07-09-2003, 03:46 PM   #3
uselessradio
touge or drift?
 
Join Date: Jul 2003
Location: GUAM
Posts: 15
haha... thats funny cause ive been practicing on my stock suspensions and it works pretty well. i cant wait till i slap no the LSD. you think that stock exhaust is fine though? i always felt like relieving back pressure though. what do you suggest? whats your view on just welding on a muffler or the whole catback exhaust.
uselessradio is offline   Reply With Quote
Old 07-09-2003, 10:58 PM   #4
MrMigs
Land Ho!!
 
MrMigs's Avatar
 
Join Date: Jun 2003
Location: San Gabriel, CA
Posts: 114
Send a message via ICQ to MrMigs Send a message via AIM to MrMigs
stock exhaust is fine. That reminds me of one of my friends. He had an SR20DET in his S14 for a few months with stock exhaust, and it was fine. To tell you the truth, I don't notice THAT much of a difference with my aftermarket exhaust. I think it's the Headers that are holding back the power.

Usually, if you just weld on a muffler, you'll get better sound, but little to no difference in performance. You're much better off getting a cat-back. That, or aftermarket muffler with custom pipes done at a muffler shop
MrMigs is offline   Reply With Quote
Old 07-11-2003, 02:27 AM   #5
emission
Moderator
 
emission's Avatar
 
Join Date: Jun 2003
Location: Long Beach, Seal Beach
Posts: 1,301
Send a message via AIM to emission
Quote:
Originally posted by MrMigs
stock exhaust is fine. That reminds me of one of my friends. He had an SR20DET in his S14 for a few months with stock exhaust, and it was fine. To tell you the truth, I don't notice THAT much of a difference with my aftermarket exhaust. I think it's the Headers that are holding back the power.

Usually, if you just weld on a muffler, you'll get better sound, but little to no difference in performance. You're much better off getting a cat-back. That, or aftermarket muffler with custom pipes done at a muffler shop
header's and remove the cats
__________________

emission is offline   Reply With Quote
Old 07-11-2003, 01:16 PM   #6
JonnySlick
Registered User
 
JonnySlick's Avatar
 
Join Date: Jul 2003
Location: Just Moved to Crossville, TN from Las Vegas ... wow what a change!
Posts: 448
Send a message via Yahoo to JonnySlick
well first before you do anything...fix anything that is broken, worn out, or you're unsure of as far as from a safety concern.

yeah i think the stock header/exhaust maifold and cats are the main power drain on any car. so i'd deff. do that mod first, and with more air flowing out, it wouldn't hurt to have more air coming in too. so intake would be good at this point. LSD is good to help hold a drift, but not to start a drift. just makes the job easier and more fun. stock suspension is ok to learn on....as long as everything is in good working order...but when you replace any of the broken suspension items go back with stuff that is stiffer, stronger, and better than stock. newbies don't need a 2K coilover setup though. good shocks and quality springs are just fine too, esp. if you're on a budget. but be aware: drifting costs money! bling bling
JonnySlick is offline   Reply With Quote
Old 07-22-2003, 07:29 PM   #7
marshun
stop spreading disinfo
 
Join Date: Jul 2003
Posts: 554
Send a message via AIM to marshun
headers and a custom exhaust from the headers back. i dont think theres a reason to bust so much money on a cat back or an axle back exhaust system. but if you turbo it.. get the 3" pipes. the response from the turbo is a lot better.
marshun is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Low traction FF vs Rwd SidewaysGts TECH Discussion Forum 23 12-31-2004 01:15 AM
My Drifting Experience and A Question Demianu27 NEW to DRIFTING (BEGINNERS) Forum 10 12-13-2004 05:34 PM
My Car is a POS. (PICS. Lots.) Al Pictures and Video Clips 17 08-31-2004 08:06 PM
Redline TV Boycott nissanguy_24 General Chat (DRIFTING Discussion/News and SITE Updates) 89 07-11-2004 09:48 PM
Race car vs. Street Tune panda_3ight_6 General Chat (DRIFTING Discussion/News and SITE Updates) 2 12-23-2003 09:02 AM


All times are GMT -7. The time now is 05:46 PM.


All times are GMT -7. The time now is 05:46 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.6.0