R33 front clip

DA WIZZARD · 06-10-2004, 11:05 AM

Hey guy I just wanted to know if anybody had a skyline r33 front clip in their 240 and your experiences with the clip because I'm getting the clip in two months from D.C . The clip contains everything(gauges,rb25det motor and ect).

mranlet · 06-10-2004, 11:15 AM

Ask the folks at the NICO forums if you haven't already. McKinney Motorsports might be able to tell you something as well.

-MR

up-speed · 06-24-2004, 01:30 PM

I have a RB25 in my s14, very simple swap. Very straight forward and wiring is not that much different than that of a SR or CA.

So far I have put 20k+ miles on the car since the swap.

jsp86 · 06-24-2004, 01:44 PM

How you do the wire?

up-speed · 06-24-2004, 03:46 PM

FSM and wiring diagrams, they can be found throughout the interweb.

Silvia54 · 06-25-2004, 02:54 PM

What did you do about the motor mounts. I have heard that the engine does not fit in the 240 perfectly. Is that true? Do you have to make new motor mount or is it a drop in like the SR and CA

up-speed · 06-25-2004, 03:01 PM

I used custom mounts made by Mckinney Motorsports.

Vosko · 06-26-2004, 07:39 AM

justin's car is FAST too

jsp86 · 06-26-2004, 12:16 PM

Can i see some pic? pls...

up-speed · 06-26-2004, 03:05 PM

here is a link to pics and mods

R33 powered s14

06-10-2004, 11:05 AM	#1
DA WIZZARD Newbie Join Date: Apr 2004 Location: O town Posts: 12	R33 front clip Hey guy I just wanted to know if anybody had a skyline r33 front clip in their 240 and your experiences with the clip because I'm getting the clip in two months from D.C . The clip contains everything(gauges,rb25det motor and ect).

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

06-10-2004, 11:15 AM	#2
mranlet Smokes Dynamite Join Date: Dec 2003 Location: Tampa, CT, all over the place! Posts: 1,090	Ask the folks at the NICO forums if you haven't already. McKinney Motorsports might be able to tell you something as well. -MR

06-24-2004, 01:30 PM	#3
up-speed Registered User Join Date: Jan 2004 Location: ---> So Cal Posts: 21	I have a RB25 in my s14, very simple swap. Very straight forward and wiring is not that much different than that of a SR or CA. So far I have put 20k+ miles on the car since the swap.

06-24-2004, 01:44 PM	#4
jsp86 Registered User Join Date: Dec 2003 Location: So Cal Posts: 139	How you do the wire?

06-24-2004, 03:46 PM	#5
up-speed Registered User Join Date: Jan 2004 Location: ---> So Cal Posts: 21	FSM and wiring diagrams, they can be found throughout the interweb.

06-25-2004, 02:54 PM	#6
Silvia54 Stock 240SX Owner Join Date: May 2004 Location: Birmingham, AL Posts: 31	What did you do about the motor mounts. I have heard that the engine does not fit in the 240 perfectly. Is that true? Do you have to make new motor mount or is it a drop in like the SR and CA

06-25-2004, 03:01 PM	#7
up-speed Registered User Join Date: Jan 2004 Location: ---> So Cal Posts: 21	I used custom mounts made by Mckinney Motorsports.

06-26-2004, 07:39 AM	#8
Vosko Registered User Join Date: May 2004 Posts: 204	justin's car is FAST too

06-26-2004, 12:16 PM	#9
jsp86 Registered User Join Date: Dec 2003 Location: So Cal Posts: 139	Can i see some pic? pls...

06-26-2004, 03:05 PM	#10
up-speed Registered User Join Date: Jan 2004 Location: ---> So Cal Posts: 21	here is a link to pics and mods R33 powered s14