S13 crankshaft vs. S14 crankshaft

TX Drifter · 07-23-2004, 12:01 PM

are these the same. I found one out of a S13 redtop and I need to put it in my S14 engine. Will this work? Just want to make sure. THanks for the input guys!!!

Ernie · 07-23-2004, 12:03 PM

Yes it will work...but you have to match the stamp numbers and get the right bearings, good luck. My engine uses an NA S14 crank. Makes 400hp.

TX Drifter · 07-23-2004, 01:16 PM

thanks alot Ernie. where is a good place to get bearings?

Ernie · 07-23-2004, 07:38 PM

where do you live?...if you are in SoCal area, then go to Superior/Puente Hills Nissan and talk to Mikey. He can get anything having to do with SR20s or RBs or whatever. Like I said before you will want to consult your FSM(factory service manual) before you order to determine which bearings you will need and check your stamps on the block and the crank.

Ernie · 07-23-2004, 07:39 PM

Actually any Nissan dealer should be able to get the bearings. You need the numbers though.

07-23-2004, 12:01 PM	#1
TX Drifter Newbie Join Date: Jun 2004 Location: San Marcos, TX Posts: 32	S13 crankshaft vs. S14 crankshaft are these the same. I found one out of a S13 redtop and I need to put it in my S14 engine. Will this work? Just want to make sure. THanks for the input guys!!!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

07-23-2004, 12:03 PM	#2
Ernie High Speed Magician Join Date: Apr 2004 Location: Walnut, California Posts: 156	Yes it will work...but you have to match the stamp numbers and get the right bearings, good luck. My engine uses an NA S14 crank. Makes 400hp.

07-23-2004, 01:16 PM	#3
TX Drifter Newbie Join Date: Jun 2004 Location: San Marcos, TX Posts: 32	thanks alot Ernie. where is a good place to get bearings?

07-23-2004, 07:38 PM	#4
Ernie High Speed Magician Join Date: Apr 2004 Location: Walnut, California Posts: 156	where do you live?...if you are in SoCal area, then go to Superior/Puente Hills Nissan and talk to Mikey. He can get anything having to do with SR20s or RBs or whatever. Like I said before you will want to consult your FSM(factory service manual) before you order to determine which bearings you will need and check your stamps on the block and the crank.

07-23-2004, 07:39 PM	#5
Ernie High Speed Magician Join Date: Apr 2004 Location: Walnut, California Posts: 156	Actually any Nissan dealer should be able to get the bearings. You need the numbers though.