S14 K's Brakes

kuku_drifter · 08-08-2004, 07:53 AM

I own and Actual Silvia K's S14 in Japan and have been trying for nearly a month to find brake information. I am looking for Brake Rotors (drilled,slotted,both) for the front and rear and Hawk HP+ Pads front and rear. Everyone in the states does the conversions for this and that. I have stock 4 piston front calipers and one piston rears. I have some ideas as to what might work but since I will have to mail them to Japan I don't want to be guessing. I pulled the pads and rotors, took measurements and made outlines of the pads.

Is there anyone out there that knows for sure what part numbers I need? Has anyone done this yet? Is there a brake specialist, Company, willing to work with me to find out for sure?

I appreciate any help.

Thanks .

Ghost of Duluth · 08-08-2004, 08:15 AM

This is a great question, I will see if I can find any info for you. In the meantime, bump it every couple hours or so until some of the more knowledgable people get on. I would like to know the answer myself.

nis14 · 08-08-2004, 08:30 AM

the front are the same as the Iron 30mm Z32 Brakes...

how do I know know this because my front brakes are off a JDM S14 K's...

back for the back brakes it is my understanding that it is the same as the USDM sliding single piston brakes...

kuku_drifter · 08-08-2004, 02:39 PM

Here are some measurements I took...

Front:
Rotor Diameter = 280mm*
Rotor Thickness = 30mm*
Hat Outside Diameter = 155mm*
Pads are Sumitomo SN258P E7X13

Rear:
Rotor Diameter = 258mm*
Rotor Thickness = 9mm*
Hat Outside Diameter = 165mm*
Pads are Sumitomo SN551P 8G02

**** I forgot to measure hat hight. Time to pull the breaks... AGAIN.

* All measurements are made with a tape measure so may be off a little bit.

NIS14 - Call me the anal retarded aszmunch... but can you give me a year for the Z32 30mm.... Just so I can place my order?

Thanks....

08-08-2004, 07:53 AM	#1
kuku_drifter Newbie Join Date: Aug 2004 Location: Okinawa, Japan Posts: 5	S14 K's Brakes I own and Actual Silvia K's S14 in Japan and have been trying for nearly a month to find brake information. I am looking for Brake Rotors (drilled,slotted,both) for the front and rear and Hawk HP+ Pads front and rear. Everyone in the states does the conversions for this and that. I have stock 4 piston front calipers and one piston rears. I have some ideas as to what might work but since I will have to mail them to Japan I don't want to be guessing. I pulled the pads and rotors, took measurements and made outlines of the pads. Is there anyone out there that knows for sure what part numbers I need? Has anyone done this yet? Is there a brake specialist, Company, willing to work with me to find out for sure? I appreciate any help. Thanks .

08-08-2004, 08:15 AM	#2
Ghost of Duluth Sixgun Join Date: Nov 2003 Location: Neverland Posts: 2,280	This is a great question, I will see if I can find any info for you. In the meantime, bump it every couple hours or so until some of the more knowledgable people get on. I would like to know the answer myself. __________________ Team SIXGUN, Don't whine about the food chain, be the top of it. Tokyo Pimps, Godzilla is coming. Lorin, oh Lorin, where have you gone?? If you're in the stands warming the bench, don't whine about the guys in the drivers seats.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

08-08-2004, 08:30 AM	#3
nis14 Registered User Join Date: Aug 2004 Posts: 3	the front are the same as the Iron 30mm Z32 Brakes... how do I know know this because my front brakes are off a JDM S14 K's... back for the back brakes it is my understanding that it is the same as the USDM sliding single piston brakes...

08-08-2004, 02:39 PM	#4
kuku_drifter Newbie Join Date: Aug 2004 Location: Okinawa, Japan Posts: 5	Here are some measurements I took... Front: Rotor Diameter = 280mm* Rotor Thickness = 30mm* Hat Outside Diameter = 155mm* Pads are Sumitomo SN258P E7X13 Rear: Rotor Diameter = 258mm* Rotor Thickness = 9mm* Hat Outside Diameter = 165mm* Pads are Sumitomo SN551P 8G02 **** I forgot to measure hat hight. Time to pull the breaks... AGAIN. * All measurements are made with a tape measure so may be off a little bit. NIS14 - Call me the anal retarded aszmunch... but can you give me a year for the Z32 30mm.... Just so I can place my order? Thanks....