Suspension Tunning: What Kind?

Phrost · 09-11-2004, 03:31 PM

I have decided that I am going to get some Kei Office XR coilovers but I am not sure what company or companies are good for other suspension related products. Such as, control arms, tension rods, sway bars, strut bars, ect. Also if there is anything I left out that is important for tunning you suspension please feel free to mention them.

Thanks

LexmarkX73 · 09-11-2004, 03:42 PM

buying parts isnt tuning your suspension, adjusting it to your driving style is.

Phrost · 09-11-2004, 04:19 PM

Sorry I didn't word that properly.

chmercer · 09-11-2004, 08:28 PM

ahh kei office xr, that is a good coilover but it is difficult to tune to other suspension parts. you need careful consideration. i would suggest carbon fiber jic rear strut bar with tri point cusco front strut bar. front tension rods make sure to go with tein for the unique heim spherical Y joint. in the rear, left rear upper get cusco, but on the right make sure to get kazaama, with energy suspension bushing. leave the cusco arm stock bushing. strut bars get suspension techniques, but not the crappy USDM suspension techniques bars, get the japanese spec suspension techniques, they are thicker. this will allow for optimum camber on all 4 wheels with a nice toe out in the front, good turn in.

AlexPfeiffer · 09-14-2004, 01:16 AM

LOL! Dont belive a word of that last post or your an idiot!

Phrost · 09-14-2004, 03:22 PM

I didn't, that's why I didn't even reply.

I am considering you products Alex, could you tell me a little more about them?

AlexPfeiffer · 09-17-2004, 09:58 AM

Take a look here www.battleversion.com and if you have any questions then just hit me up at alex@battleversion.com

Phrost · 09-17-2004, 05:56 PM

Alright,
Thanks for the help.

09-11-2004, 03:31 PM	#1
Phrost Newbie Join Date: Sep 2004 Posts: 20	Suspension Tunning: What Kind? I have decided that I am going to get some Kei Office XR coilovers but I am not sure what company or companies are good for other suspension related products. Such as, control arms, tension rods, sway bars, strut bars, ect. Also if there is anything I left out that is important for tunning you suspension please feel free to mention them. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

09-11-2004, 03:42 PM	#2
LexmarkX73 noob Join Date: Jul 2004 Location: computer Posts: 250	buying parts isnt tuning your suspension, adjusting it to your driving style is.

09-11-2004, 04:19 PM	#3
Phrost Newbie Join Date: Sep 2004 Posts: 20	Sorry I didn't word that properly.

09-11-2004, 08:28 PM	#4
chmercer Registered User Join Date: Aug 2004 Posts: 57	ahh kei office xr, that is a good coilover but it is difficult to tune to other suspension parts. you need careful consideration. i would suggest carbon fiber jic rear strut bar with tri point cusco front strut bar. front tension rods make sure to go with tein for the unique heim spherical Y joint. in the rear, left rear upper get cusco, but on the right make sure to get kazaama, with energy suspension bushing. leave the cusco arm stock bushing. strut bars get suspension techniques, but not the crappy USDM suspension techniques bars, get the japanese spec suspension techniques, they are thicker. this will allow for optimum camber on all 4 wheels with a nice toe out in the front, good turn in.

09-14-2004, 01:16 AM	#5
AlexPfeiffer Driver Join Date: May 2004 Posts: 765	LOL! Dont belive a word of that last post or your an idiot!

09-14-2004, 03:22 PM	#6
Phrost Newbie Join Date: Sep 2004 Posts: 20	I didn't, that's why I didn't even reply. I am considering you products Alex, could you tell me a little more about them?

09-17-2004, 09:58 AM	#7
AlexPfeiffer Driver Join Date: May 2004 Posts: 765	Take a look here www.battleversion.com and if you have any questions then just hit me up at alex@battleversion.com

09-17-2004, 05:56 PM	#8
Phrost Newbie Join Date: Sep 2004 Posts: 20	Alright, Thanks for the help.