 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|
|||||||
This is a discussion on 240sx SOHC ignition problem please help within the TECH Discussion Forum forums, part of the TECH Discussion category; ok we had the mototr running fine then i just bolted on my body kit and got it ready to ...
 |
|
|
Thread Tools | Rate Thread | Display Modes |
10-03-2004, 10:17 AM
|
#1 |
|
Registered User
Join Date: Oct 2004
Posts: 39
 |
240sx SOHC ignition problem please help
ok we had the mototr running fine then i just bolted on my body kit and got it ready to take out last night and then i try and start it again last night and it just cranks and we have no spark....the only thing i noticed is that the mount for the coil pack is really really really hot to the touch....so would this be a short or what is happening to make the coil pack mount get really really hot and me losing spark...........any suggestions will work and thank you
' --Ryan |
|
|
|
10-03-2004, 11:49 AM
|
#2 |
|
Guest
Join Date: Sep 2004
Posts: 43
|
sounds like you answered your own question. That has all the characteristics of a loose connection or a short.
|
|
|
|
|
10-03-2004, 02:31 PM
|
#3 |
|
17 cycles per second
Join Date: Jul 2004
Location: Bay Area
Posts: 41
|
I know that with coils, if the coil is improperly grounded (the coil isnt seated tight enough, the body has a bad ground, ect.) the coil gets extreemly hot, and there is no spark.
I would check all of your grounds first, you might have undone something while putting on the body kit. |
|
|
|
|
10-06-2004, 01:11 PM
|
#4 |
|
Registered User
Join Date: Aug 2004
Posts: 30
|
You have a SOHC and have coil packs???? Did you swap to SR or KA24DE? Normally SOHC have distributors.
|
|
|
|
|
10-27-2004, 01:53 PM
|
#5 |
|
Registered User
Join Date: Jun 2003
Location: ATLANTA
Posts: 89
|
coil singular.....and 14yearolddrifter.....you are a avatar theif.
|
|
|
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
