s13 wheel offset

RPS13PILOT · 10-12-2004, 06:16 PM

Im trying to get 15 inch rims, i've looked at 5 zigen fn-01c's and buddy clubs but no one makes 15's with a 4-114.3 lug pattern Im running tein HE's so i have to get a less than a 38 mm offset.Does any body know what japanese rims i could use?

GRiDRaceTech · 10-14-2004, 12:10 PM

There are so many Japanese 15s you could use, it would blow your mind.

Enkei 92 (relatively common)
Moda/Modex Dori Dori (Dori 2) Mesh (relatively common)
Work Equip (not that common in 15" sizes)
SSR Formula Mesh (common)
SSR Reverse Formula Mesh (kinda common)
Watanabe Type F8 (usually expensive)
Longchamps XR4 (common)
Southern Ways mesh (kinda rare)
Riken Mesh (kinda common)

Those are only the JDM-look wheels, though. Also, that's a very incomplete list.

RPS13PILOT · 10-14-2004, 05:26 PM

thanks for the info. Are these race rims prone to bend?

GRiDRaceTech · 10-15-2004, 09:13 PM

Well... depends on how stiff your suspension is and what tires you'll be running.

My advice: avoid potholes.

Alphajacks · 10-22-2004, 02:20 PM

What is the difference in the SSR formula mesh and reverse mesh. They both look the same?

GRiDRaceTech · 10-22-2004, 06:27 PM

No they don't. Look harder.

silviafreak · 10-25-2004, 07:54 PM

where can you get longchamps from?

GRiDRaceTech · 10-27-2004, 09:53 PM

Any place that imports wheels from Japan. I'd recommend Takumi Project.
www.takumiproject.com

10-12-2004, 06:16 PM	#1
RPS13PILOT slide Join Date: Dec 2003 Location: O.C Posts: 31	s13 wheel offset Im trying to get 15 inch rims, i've looked at 5 zigen fn-01c's and buddy clubs but no one makes 15's with a 4-114.3 lug pattern Im running tein HE's so i have to get a less than a 38 mm offset.Does any body know what japanese rims i could use?

10-14-2004, 05:26 PM	#3
RPS13PILOT slide Join Date: Dec 2003 Location: O.C Posts: 31	thanks for the info. Are these race rims prone to bend? Last edited by RPS13PILOT; 10-14-2004 at 05:29 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

10-14-2004, 12:10 PM	#2
GRiDRaceTech Opposite Lock Join Date: Jan 2004 Location: SoCal Posts: 1,096	There are so many Japanese 15s you could use, it would blow your mind. Enkei 92 (relatively common) Moda/Modex Dori Dori (Dori 2) Mesh (relatively common) Work Equip (not that common in 15" sizes) SSR Formula Mesh (common) SSR Reverse Formula Mesh (kinda common) Watanabe Type F8 (usually expensive) Longchamps XR4 (common) Southern Ways mesh (kinda rare) Riken Mesh (kinda common) Those are only the JDM-look wheels, though. Also, that's a very incomplete list.

10-15-2004, 09:13 PM	#4
GRiDRaceTech Opposite Lock Join Date: Jan 2004 Location: SoCal Posts: 1,096	Well... depends on how stiff your suspension is and what tires you'll be running. My advice: avoid potholes.

10-22-2004, 02:20 PM	#5
Alphajacks Registered User Join Date: Feb 2004 Location: Gaithersburg, Maryland Posts: 26	What is the difference in the SSR formula mesh and reverse mesh. They both look the same?

10-22-2004, 06:27 PM	#6
GRiDRaceTech Opposite Lock Join Date: Jan 2004 Location: SoCal Posts: 1,096	No they don't. Look harder.

10-25-2004, 07:54 PM	#7
silviafreak dont think-drive Join Date: Jul 2004 Posts: 82	where can you get longchamps from?

10-27-2004, 09:53 PM	#8
GRiDRaceTech Opposite Lock Join Date: Jan 2004 Location: SoCal Posts: 1,096	Any place that imports wheels from Japan. I'd recommend Takumi Project. www.takumiproject.com